LMC6041AIN Equivalent & Substitute Parts

Part Overview

The LMC6041AIN is a general-purpose operational amplifier manufactured by Texas Instruments, housed in an 8-DIP through-hole package. This device features rail-to-rail output capability and is designed for low-power applications requiring single-circuit amplification. The LMC6041AIN is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity.

Substiute Parts

LMC6041AIN

Texas InstrumentsIn Stock: 1343LMC6041AIN Datasheet

Current PartRFQ

LMC6001AIN/NOPB

Texas InstrumentsIn Stock: 1288LMC6001AIN/NOPB Datasheet

MFR RecommendedRFQ

LMC6041IN/NOPB

Texas InstrumentsIn Stock: 8849LMC6041IN/NOPB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LMC6041AIN are identified based on strict electrical and mechanical compatibility criteria. The following parameters define valid substitution:

Primary Compatibility Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole
• Voltage - Supply Span (Min): 4.5 V
• Voltage - Supply Span (Max): 15.5 V
• Operating Temperature: -40°C to 85°C

Substitute Categories:

Direct Equivalent (Identical Electrical Performance): LMC6041IN/NOPB maintains identical electrical specifications to the LMC6041AIN, including slew rate, gain bandwidth product, input bias current, input offset voltage, and supply current. This part differs only in packaging format (Tube vs. unspecified) and product status (Last Time Buy vs. Obsolete).

Functional Substitute (Enhanced Performance): LMC6001AIN/NOPB provides superior electrical performance within the same mechanical and thermal envelope. This part is classified as an MFR Recommended substitute and is currently in Active product status.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Pin-Compatible, Identical Performance): LMC6041IN/NOPB is the direct equivalent to LMC6041AIN. Both parts share identical electrical specifications and mechanical packaging. Selection of LMC6041IN/NOPB is appropriate for applications where the original LMC6041AIN specifications are required. Current inventory status is Last Time Buy, indicating limited future availability.

For Long-Term Design Continuity: LMC6001AIN/NOPB is designated as the manufacturer-recommended substitute and maintains Active product status. This part is pin-compatible and mechanically interchangeable within the 8-DIP through-hole package. The LMC6001AIN/NOPB exhibits enhanced electrical performance characteristics, including increased slew rate (1.5 V/µs vs. 0.02 V/µs), higher gain bandwidth product (1.3 MHz vs. 75 kHz), and reduced input offset voltage (350 µV vs. 1 mV). Supply current is elevated (550 µA vs. 18 µA). All parts maintain compliance with ROHS3 and REACH requirements across the operating temperature range of -40°C to 85°C.

Frequently Asked Questions (FAQ)

Q: Can LMC6041IN/NOPB be used as a direct replacement for LMC6041AIN? A: Yes. LMC6041IN/NOPB is electrically and mechanically identical to LMC6041AIN. Both parts feature identical slew rate, gain bandwidth product, input bias current, input offset voltage, and supply current specifications. The parts are pin-compatible within the 8-DIP through-hole package.

Q: What is the difference between LMC6001AIN/NOPB and LMC6041AIN? A: LMC6001AIN/NOPB and LMC6041AIN are both general-purpose, rail-to-rail operational amplifiers in 8-DIP packages with identical supply voltage ranges and operating temperatures. LMC6001AIN/NOPB provides enhanced performance with slew rate of 1.5 V/µs (vs. 0.02 V/µs), gain bandwidth product of 1.3 MHz (vs. 75 kHz), and lower input offset voltage of 350 µV (vs. 1 mV). Supply current consumption increases to 550 µA (vs. 18 µA).

Q: Is LMC6001AIN/NOPB pin-compatible with LMC6041AIN? A: Yes. Both parts are housed in 8-DIP (0.300", 7.62mm) through-hole packages with identical pin configurations, enabling direct mechanical and electrical substitution.

Q: What is the product status of each substitute part? A: LMC6041AIN is Obsolete. LMC6041IN/NOPB is Last Time Buy, indicating limited future availability. LMC6001AIN/NOPB is Active and recommended for new designs requiring long-term component availability.

Q: Are all substitute parts RoHS3 compliant? A: Yes. LMC6041AIN, LMC6041IN/NOPB, and LMC6001AIN/NOPB are all ROHS3 Compliant and REACH Unaffected.

Q: What packaging formats are available for substitute parts? A: LMC6041IN/NOPB is supplied in Tube packaging. LMC6001AIN/NOPB is supplied in Tube packaging. Both maintain the 8-DIP through-hole form factor.