LMC6041AIMX Equivalent & Substitute Parts

Part Overview

The LMC6041AIMX is a general-purpose operational amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This device features rail-to-rail output capability and is designed for low-power applications requiring single-circuit amplification. The LMC6041AIMX is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and ongoing production requirements. Substitute parts must maintain compatibility with the 8-SOIC package format and support the specified supply voltage range of 4.5 V to 15.5 V.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	0.02	V/µs
Gain Bandwidth Product	75	kHz
Current - Input Bias	0.002	pA
Voltage - Input Offset	1	mV
Current - Supply	18	µA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	4.5	V
Voltage - Supply Span (Max)	15.5	V
Operating Temperature	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory criteria:

Primary Compatibility Requirements:

Package format: 8-SOIC (0.154", 3.90mm Width)
Mounting type: Surface Mount
Amplifier type: General Purpose
Number of circuits: 1
Output type: Rail-to-Rail
Supply voltage range overlap: Minimum 4.5 V to 15.5 V compatibility

Substitution Categories:

Category 1: Direct Form-Fit Replacement (Same Manufacturer) LMC6041AIMX/NOPB is the tape-and-reel packaged variant of the base LMC6041 series from Texas Instruments. This part maintains identical electrical specifications and package geometry, differing only in packaging format (Tape & Reel versus bulk). Product status is Active, ensuring continued availability.

Category 2: Functional Equivalents (Analog Devices DigiTrim® Series) The AD8661 and AD8663 series from Analog Devices provide functional equivalence within the same 8-SOIC package. Both series support the required supply voltage range (5 V to 16 V encompasses the 4.5 V to 15.5 V requirement) and maintain rail-to-rail output capability. These parts are available in multiple packaging formats (Tube, Tape & Reel, and Cut Tape & Digi-Reel®) and carry Active product status with RoHS3 compliance.

Parameter Comparison

Parameter	LMC6041AIMX	LMC6041AIMX/NOPB	AD8661ARZ	AD8661ARZ-REEL	AD8661ARZ-REEL7	AD8663ARZ	AD8663ARZ-REEL	AD8663ARZ-REEL7
Manufacturer	Texas Instruments	Texas Instruments	Analog Devices	Analog Devices	Analog Devices	Analog Devices	Analog Devices	Analog Devices
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	0.02	0.02	3.5	3.5	3.5	0.3	0.3	0.3
Gain Bandwidth Product (kHz)	75	75	4000	4000	4000	540	540	540
Current - Input Bias (pA)	0.002	0.002	0.3	0.3	0.3	0.3	0.3	0.3
Voltage - Input Offset (mV)	1	1	0.05	0.05	0.05	0.04	0.04	0.04
Current - Supply (µA)	18	18	1250	1250	1250	230	230	230
Current - Output / Channel (mA)	40	40	140	140	140	50	50	50
Voltage - Supply Span (Min)	4.5 V	4.5 V	5 V	5 V	5 V	5 V	5 V	5 V
Voltage - Supply Span (Max)	15.5 V	15.5 V	16 V	16 V	16 V	16 V	16 V	16 V
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	Non-compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant
Packaging Format	Bulk	Tape & Reel (TR)	Tube	Tape & Reel (TR)	Cut Tape & Digi-Reel®	Tube	Tape & Reel (TR)	Cut Tape & Digi-Reel®

Engineering Selection Recommendations

For Direct Replacement (Recommended for Existing Designs):

LMC6041AIMX/NOPB is the primary recommendation for applications currently using the LMC6041AIMX. This part maintains identical electrical performance and package compatibility while offering Active product status and RoHS3 compliance. The transition from bulk to tape-and-reel packaging aligns with modern manufacturing practices and supply chain requirements.

For New Designs Requiring Enhanced Performance:

The AD8661 series (available as AD8661ARZ, AD8661ARZ-REEL, or AD8661ARZ-REEL7) provides significantly improved performance characteristics including higher slew rate (3.5 V/µs versus 0.02 V/µs), expanded gain bandwidth product (4 MHz versus 75 kHz), and superior input offset voltage (50 µV versus 1 mV). These enhancements support higher-frequency applications while maintaining 8-SOIC package compatibility and rail-to-rail output capability. All variants carry Active status and RoHS3 compliance.

For Power-Constrained Applications:

The AD8663 series (available as AD8663ARZ, AD8663ARZ-REEL, or AD8663ARZ-REEL7) offers a balanced performance profile with moderate slew rate (0.3 V/µs) and gain bandwidth product (540 kHz), while maintaining lower supply current (230 µA) compared to the AD8661 series (1.25 mA). This configuration suits applications requiring extended operating temperature range (-40°C to 125°C) and improved input offset voltage (40 µV) without the power consumption of higher-performance alternatives.

Packaging Format Selection:

Tube packaging (AD8661ARZ, AD8663ARZ): Suitable for low-volume prototyping and manual assembly
Tape & Reel (TR) (AD8661ARZ-REEL, AD8663ARZ-REEL): Standard for automated pick-and-place assembly
Cut Tape & Digi-Reel® (AD8661ARZ-REEL7, AD8663ARZ-REEL7): Flexible format supporting both manual and automated assembly with highest inventory availability

All substitute parts maintain compliance with REACH regulations and carry EAR99 ECCN classification identical to the original LMC6041AIMX.

Frequently Asked Questions (FAQ)

Q: Can LMC6041AIMX/NOPB be used as a direct replacement for LMC6041AIMX?

A: Yes. LMC6041AIMX/NOPB is the tape-and-reel variant of the same base product. Electrical specifications, package dimensions, and pin configuration are identical. The only difference is packaging format. This part is Active and RoHS3 compliant, making it the preferred choice for new production.

Q: What are the key differences between the AD8661 and AD8663 series?

A: Both series maintain 8-SOIC package compatibility and rail-to-rail output. The AD8661 provides higher performance with 3.5 V/µs slew rate and 4 MHz gain bandwidth product, consuming 1.25 mA supply current. The AD8663 offers moderate performance with 0.3 V/µs slew rate and 540 kHz gain bandwidth product, consuming 230 µA supply current. Selection depends on application frequency requirements and power budget constraints.

Q: Are all substitute parts compatible with the 4.5 V to 15.5 V supply range of the original LMC6041AIMX?

A: LMC6041AIMX/NOPB maintains the identical 4.5 V to 15.5 V range. The Analog Devices parts (AD8661 and AD8663 series) specify 5 V to 16 V, which encompasses the original range with 0.5 V margin at the lower end. Applications operating at 4.5 V require verification of Analog Devices datasheets for performance at this voltage level.

Q: What packaging formats are available for each substitute part?

A: LMC6041AIMX/NOPB is available in Tape & Reel format only. AD8661 series is available in Tube (ARZ), Tape & Reel (ARZ-REEL), and Cut Tape & Digi-Reel® (ARZ-REEL7) formats. AD8663 series is available in the same three formats. Selection should align with assembly equipment capabilities and volume requirements.

Q: Do all substitute parts meet RoHS compliance requirements?

A: LMC6041AIMX is RoHS non-compliant. LMC6041AIMX/NOPB and all Analog Devices variants (AD8661 and AD8663 series in all packaging formats) are RoHS3 compliant. Applications subject to RoHS regulations must use compliant alternatives.

Q: What is the operating temperature range difference between the original and substitutes?

A: LMC6041AIMX and LMC6041AIMX/NOPB operate from -40°C to 85°C. All Analog Devices substitutes (AD8661 and AD8663 series) extend the upper limit to 125°C. Applications requiring operation above 85°C must use Analog Devices alternatives.

Q: How do input offset voltage specifications compare?

A: LMC6041AIMX specifies 1 mV input offset voltage. AD8661 series specifies 50 µV, and AD8663 series specifies 40 µV. Applications requiring precision amplification with minimal offset drift should consider the Analog Devices alternatives.

Q: Are there inventory considerations for part selection?

A: Current inventory levels vary by packaging format. LMC6041AIMX/NOPB has 3190 units available. AD8661ARZ-REEL7 has 4620 units, and AD8663ARZ-REEL7 has 12800 units. For high-volume production, the Cut Tape & Digi-Reel® variants offer the highest availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message