LMC6001CIN Equivalent & Substitute Parts

Part Overview

The LMC6001CIN is a general-purpose operational amplifier manufactured by Texas Instruments, designed for rail-to-rail applications in 8-PDIP through-hole packaging. This device features a single amplifier circuit with low input bias current (0.01 pA) and operates across a wide supply voltage range of 4.5 V to 15.5 V.

The LMC6001CIN carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production or maintenance requirements for systems utilizing this component.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	1.5	V/µs
Gain Bandwidth Product	1.3	MHz
Current - Input Bias	0.01	pA
Voltage - Input Offset	1	mV
Current - Supply	550	µA
Voltage - Supply Span (Min)	4.5	V
Voltage - Supply Span (Max)	15.5	V
Operating Temperature Range	-40 to 85	°C
Mounting Type	Through Hole	—
Package / Case	8-DIP (0.300", 7.62mm)	—

Substitute Part Grouping Explanation

Substitution of the LMC6001CIN is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Slew Rate: 1.5 V/µs
Gain Bandwidth Product: 1.3 MHz
Current - Input Bias: 0.01 pA
Voltage - Input Offset: 1 mV
Current - Supply: 550 µA
Voltage - Supply Span: 4.5 V to 15.5 V
Operating Temperature Range: -40°C to 85°C

Mechanical Equivalence Criteria:

Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)

The LMC6001BIN/NOPB meets all electrical and mechanical equivalence criteria and is identified as the manufacturer-recommended substitute for the obsolete LMC6001CIN.

Parameter Comparison

Parameter	LMC6001CIN	LMC6001BIN/NOPB	Match
Manufacturer	Texas Instruments	Texas Instruments	✓
Category	Linear, Amplifiers	Linear, Amplifiers	✓
Amplifier Type	General Purpose	General Purpose	✓
Number of Circuits	1	1	✓
Output Type	Rail-to-Rail	Rail-to-Rail	✓
Slew Rate (V/µs)	1.5	1.5	✓
Gain Bandwidth Product (MHz)	1.3	1.3	✓
Current - Input Bias (pA)	0.01	0.01	✓
Voltage - Input Offset (mV)	1	1	✓
Current - Supply (µA)	550	550	✓
Voltage - Supply Span Min (V)	4.5	4.5	✓
Voltage - Supply Span Max (V)	15.5	15.5	✓
Operating Temperature (°C)	-40 to 85	-40 to 85	✓
Mounting Type	Through Hole	Through Hole	✓
Package / Case	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)	✓
Supplier Device Package	8-PDIP	8-PDIP	✓
Base Product Number	LMC6001	LMC6001	✓
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	✓
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	✓
REACH Status	REACH Unaffected	REACH Unaffected	✓
Product Status	Obsolete	Active	—

Engineering Selection Recommendations

The LMC6001BIN/NOPB is the direct substitute for the obsolete LMC6001CIN. Selection of this substitute is supported by the following factors:

Product Status: The LMC6001BIN/NOPB maintains active product status with Texas Instruments, ensuring ongoing availability and manufacturing support. The LMC6001CIN is obsolete and no longer in production.

Compliance & Certifications: Both parts maintain identical compliance certifications: ROHS3 Compliant, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited). No regulatory or environmental barriers exist to substitution.

Electrical & Mechanical Equivalence: All electrical parameters, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and operating temperature range, are identical. Mechanical compatibility is confirmed through identical 8-DIP through-hole packaging.

Supply Chain Continuity: The LMC6001BIN/NOPB is available in significantly higher inventory (100,200 pieces) compared to the obsolete LMC6001CIN (1,404 pieces), supporting long-term design continuity and production requirements.

Frequently Asked Questions (FAQ)

Q: Can the LMC6001BIN/NOPB be used as a direct replacement for the LMC6001CIN in existing designs?

A: Yes. The LMC6001BIN/NOPB is electrically and mechanically equivalent to the LMC6001CIN across all specified parameters. No circuit modifications or board redesign are required for substitution.

Q: What is the primary difference between the LMC6001CIN and LMC6001BIN/NOPB?

A: The primary difference is product status. The LMC6001CIN is obsolete, while the LMC6001BIN/NOPB is active. The packaging designation differs (CIN vs. BIN/NOPB), but both use identical 8-DIP through-hole packages with equivalent electrical performance.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited). No additional qualification or testing is required for substitution from a regulatory perspective.

Q: What packaging format is the LMC6001BIN/NOPB supplied in?

A: The LMC6001BIN/NOPB is supplied in Tube packaging, compared to the standard packaging of the LMC6001CIN. Both use the same 8-DIP (0.300", 7.62mm) through-hole package format suitable for automated or manual assembly.

Q: Is the LMC6001BIN/NOPB available in sufficient quantity for production?

A: Yes. The LMC6001BIN/NOPB is available in high inventory (100,200 pieces new original in stock), providing reliable supply for both prototype and production-volume requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message