LMC6001BIN Equivalent & Substitute Parts

Part Overview

The LMC6001BIN is a general-purpose operational amplifier manufactured by Texas Instruments, featuring rail-to-rail output capability in an 8-PDIP through-hole package. This device is classified as obsolete, indicating discontinued production and limited availability through standard distribution channels. The identification of equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support legacy system maintenance where this amplifier is specified.

Substiute Parts

LMC6001BIN

Texas InstrumentsIn Stock: 1335LMC6001BIN Datasheet

Current PartRFQ

LMC6001BIN/NOPB

Texas InstrumentsIn Stock: 100304LMC6001BIN/NOPB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LMC6001BIN is determined by electrical and mechanical parameter equivalence across the following criteria:

Electrical Parameters (Must Match):

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 1.5 V/µs
• Gain Bandwidth Product: 1.3 MHz
• Current - Input Bias: 0.01 pA
• Voltage - Input Offset: 1 mV
• Current - Supply: 550 µA
• Current - Output / Channel: 34 mA
• Voltage - Supply Span (Min): 4.5 V
• Voltage - Supply Span (Max): 15.5 V
• Operating Temperature: -40°C to 85°C

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Supplier Device Package: 8-PDIP

The LMC6001BIN/NOPB is identified as a direct substitute based on complete electrical and mechanical parameter equivalence. The primary distinction between these parts is product status and packaging configuration, with the substitute offering active product status and improved compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The LMC6001BIN/NOPB is the direct substitute for the LMC6001BIN. Selection of the substitute part is based on the following engineering considerations:

Product Status: The LMC6001BIN is classified as obsolete, indicating end-of-life status and unavailability through standard manufacturing channels. The LMC6001BIN/NOPB maintains active product status, ensuring continued availability and supply chain support.

Regulatory Compliance: The LMC6001BIN/NOPB is ROHS3 compliant, whereas the original part is RoHS non-compliant. This compliance improvement aligns with current regulatory requirements for electronic components in many jurisdictions.

Electrical and Mechanical Equivalence: All electrical parameters and mechanical specifications are identical between the two parts, ensuring direct functional substitution without circuit redesign or board layout modification.

Packaging Configuration: The LMC6001BIN/NOPB is supplied in tube packaging, which is standard for active production parts. The original part was supplied in bulk configuration, reflecting its obsolete status.

For applications requiring the LMC6001BIN, the LMC6001BIN/NOPB provides complete functional equivalence with improved product status and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the LMC6001BIN/NOPB be used as a direct replacement for the LMC6001BIN?

A: Yes. The LMC6001BIN/NOPB is a direct substitute. All electrical parameters, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and supply voltage range, are identical. The mechanical specifications, including through-hole mounting and 8-PDIP package configuration, are also identical.

Q: What is the difference between LMC6001BIN and LMC6001BIN/NOPB?

A: The primary differences are product status and regulatory compliance. The LMC6001BIN is obsolete and RoHS non-compliant, while the LMC6001BIN/NOPB is an active product with ROHS3 compliance. The packaging configuration differs: the original part is supplied in bulk, while the substitute is supplied in tube packaging. Electrical and mechanical specifications are identical.

Q: Is the 8-PDIP package compatible between these parts?

A: Yes. Both parts use the identical 8-DIP (0.300", 7.62mm) through-hole package configuration. No board layout or socket modifications are required for substitution.

Q: Does the LMC6001BIN/NOPB operate within the same temperature range?

A: Yes. Both parts operate across the identical temperature range of -40°C to 85°C.

Q: What does the "/NOPB" designation indicate?

A: The "/NOPB" suffix indicates "No Plumbum" (lead-free) packaging, which is associated with RoHS compliance. This designation reflects the improved regulatory compliance status of the substitute part.

Q: Are there any circuit design changes required when substituting the LMC6001BIN/NOPB for the LMC6001BIN?

A: No circuit design changes are required. The electrical specifications are identical, including all performance parameters and supply voltage requirements. The parts are pin-compatible and functionally equivalent.

Q: What is the supply voltage range for both parts?

A: Both the LMC6001BIN and LMC6001BIN/NOPB operate with a supply voltage span of 4.5 V minimum to 15.5 V maximum.