LM6134AIM Equivalent & Substitute Parts

Part Overview

The LM6134AIM is a general-purpose operational amplifier featuring four independent circuits in a 14-SOIC surface mount package. This device provides rail-to-rail output capability with a supply voltage range of 1.8V to 24V, making it suitable for low-power analog signal processing applications. The LM6134AIM is classified as obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. The substitute part LM6134AIMX/NOPB maintains identical electrical and mechanical specifications while offering active product status and improved availability.

Substiute Parts

LM6134AIM

Texas InstrumentsIn Stock: 5461LM6134AIM Datasheet

Current PartRFQ

LM6134AIMX/NOPB

Texas InstrumentsIn Stock: 22629LM6134AIMX/NOPB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LM6134AIM with the LM6134AIMX/NOPB is based on strict electrical and mechanical parameter equivalence. Both parts share identical specifications across all critical performance parameters:

Electrical Equivalence Criteria:

• Amplifier type: General Purpose (4 circuits)
• Output configuration: Rail-to-Rail
• Slew rate: 14 V/µs
• Gain bandwidth product: 11 MHz
• Input bias current: 125 nA
• Input offset voltage: 1.7 mV
• Supply current: 390 µA (x4 channels)
• Output current per channel: 3.5 mA
• Supply voltage range: 1.8V to 24V
• Operating temperature: -40°C to 85°C

Mechanical Equivalence Criteria:

• Package type: 14-SOIC
• Package dimensions: 0.154" × 3.90mm width
• Mounting type: Surface Mount
• Moisture sensitivity level: 1 (Unlimited)

Compliance Equivalence:

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8542.33.0001

The primary distinction is product status and packaging format: LM6134AIM is obsolete with bulk inventory, while LM6134AIMX/NOPB is active with tape and reel packaging suitable for automated assembly.

Parameter Comparison

Engineering Selection Recommendations

The LM6134AIMX/NOPB is the direct equivalent for the obsolete LM6134AIM. Selection criteria are based on the following factors:

Product Status: The LM6134AIM is classified as obsolete, indicating discontinued manufacturing and limited long-term availability. The LM6134AIMX/NOPB maintains active product status with current manufacturing support from Texas Instruments.

Compliance and Certifications: Both parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8542.33.0001) classifications, ensuring regulatory equivalence for procurement and export purposes.

Packaging and Supply Chain: The LM6134AIMX/NOPB is supplied in tape and reel format with Digi-Reel packaging, optimized for automated assembly processes. Current inventory of 22,521 pieces supports production requirements. The LM6134AIM bulk inventory of 5,403 pieces may be suitable for legacy system repairs or stockpiling, but new designs should specify the active equivalent.

Electrical and Mechanical Compatibility: Complete parameter equivalence across all electrical specifications and mechanical dimensions ensures direct substitution without circuit redesign or PCB layout modification.

Frequently Asked Questions (FAQ)

Q: Can LM6134AIMX/NOPB be used as a direct replacement for LM6134AIM in existing designs?

A: Yes. All electrical parameters, mechanical dimensions, and compliance certifications are identical. The parts are pin-compatible and functionally equivalent. No circuit modifications are required.

Q: What is the difference between LM6134AIM and LM6134AIMX/NOPB?

A: The primary differences are product status and packaging format. LM6134AIM is obsolete and supplied in bulk format. LM6134AIMX/NOPB is active and supplied in tape and reel format with Digi-Reel packaging for automated assembly. Electrical and mechanical specifications are identical.

Q: Is the 14-SOIC package identical for both parts?

A: Yes. Both parts use the 14-SOIC package with dimensions of 0.154" × 3.90mm width. PCB footprints and assembly processes are identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN and HTSUS classifications. They are equivalent for regulatory and procurement purposes.

Q: Which part should be specified for new designs?

A: LM6134AIMX/NOPB should be specified for new designs due to active product status and assured long-term availability. The LM6134AIM is obsolete and not recommended for new development.

Q: Can the tape and reel packaging of LM6134AIMX/NOPB be used in manual assembly processes?

A: Yes. Tape and reel packaging can be manually unwound for component placement. However, this format is optimized for automated pick-and-place assembly equipment.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply.