LM6132AIM Equivalent & Substitute Parts

Part Overview

The LM6132AIM is a general-purpose operational amplifier manufactured by Texas Instruments, featuring dual-channel rail-to-rail output configuration in an 8-SOIC surface mount package. This device is classified as Last Time Buy, indicating discontinued production with limited remaining inventory. The LM6132AIM contains two independent amplifier circuits optimized for low-power applications requiring supply voltages between 1.8 V and 24 V.

Identification of equivalent and substitute parts becomes necessary when the LM6132AIM reaches end-of-life status or when inventory depletion occurs. Substitute components must maintain identical electrical performance characteristics and mechanical compatibility to ensure direct replacement without circuit redesign.

Substiute Parts

LM6132AIM

Texas InstrumentsIn Stock: 9662LM6132AIM Datasheet

Current PartRFQ

LM6132AIMX/NOPB

Texas InstrumentsIn Stock: 36475LM6132AIMX/NOPB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LM6132AIM is determined by strict equivalence across all electrical and mechanical parameters. The substitute relationship is based on the following criteria:

Electrical Parameter Equivalence: All substitute parts must maintain identical specifications for slew rate (14 V/µs), gain bandwidth product (11 MHz), input bias current (125 nA), input offset voltage (1.7 mV), supply current (390 µA per channel), output current capability (3.5 mA per channel), and supply voltage range (1.8 V to 24 V).

Functional Equivalence: Substitute parts must contain the same number of circuits (2), output type (rail-to-rail), and amplifier classification (general purpose).

Mechanical Compatibility: All substitute parts must use the 8-SOIC surface mount package with identical dimensions (0.154" width, 3.90 mm).

Compliance Equivalence: Substitute parts must maintain RoHS3 compliance, MSL Level 1 rating, and REACH unaffected status.

Product Status Consideration: The LM6132AIMX/NOPB is designated as Active product status, providing continued availability and manufacturing support compared to the Last Time Buy status of the LM6132AIM.

Parameter Comparison

Engineering Selection Recommendations

The LM6132AIMX/NOPB serves as the direct substitute for the LM6132AIM based on complete electrical and mechanical parameter equivalence. All critical performance specifications, including slew rate, bandwidth, bias current, offset voltage, supply current, output current, and operating temperature range, are identical between the two parts.

The primary distinction between these components is product lifecycle status. The LM6132AIM is designated Last Time Buy, indicating that Texas Instruments has discontinued production and existing inventory will be depleted. The LM6132AIMX/NOPB maintains Active product status, ensuring continued manufacturing availability and long-term supply chain reliability.

Both parts maintain identical compliance certifications: ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status. This equivalence ensures that substitution does not introduce regulatory or environmental compliance risks.

The packaging format differs between the two parts. The LM6132AIM is supplied in Tube packaging, while the LM6132AIMX/NOPB is available in Cut Tape (CT) and Digi-Reel® formats. This difference affects handling and automated assembly processes but does not impact electrical performance or mechanical fit within the 8-SOIC package footprint.

For new designs or production planning, the LM6132AIMX/NOPB is the appropriate selection due to its Active status and assured long-term availability. For existing applications currently using the LM6132AIM, transition to the LM6132AIMX/NOPB is recommended before Last Time Buy inventory is exhausted.

Frequently Asked Questions (FAQ)

Q: Can the LM6132AIMX/NOPB be used as a direct replacement for the LM6132AIM in existing circuits?

A: Yes. The LM6132AIMX/NOPB is electrically and mechanically equivalent to the LM6132AIM. All electrical parameters, including slew rate, gain bandwidth product, bias current, offset voltage, supply current, output current, and operating temperature range are identical. Both parts use the 8-SOIC surface mount package with identical pinout and dimensions. No circuit modifications are required.

Q: What is the difference between Last Time Buy and Active product status?

A: Last Time Buy status indicates that the manufacturer has discontinued production and existing inventory will be depleted. Once inventory is exhausted, the part will no longer be available. Active status indicates that the manufacturer continues production and the part remains available for new orders. The LM6132AIM is Last Time Buy, while the LM6132AIMX/NOPB is Active.

Q: Are there differences in packaging that affect assembly?

A: Yes. The LM6132AIM is supplied in Tube packaging, while the LM6132AIMX/NOPB is available in Cut Tape (CT) and Digi-Reel® formats. Tube packaging is typically used for manual assembly or small-volume production. Cut Tape and Digi-Reel® formats are optimized for automated pick-and-place assembly. The choice between packaging formats depends on production volume and assembly equipment capabilities. The electrical and mechanical specifications of the components themselves are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the LM6132AIM and LM6132AIMX/NOPB are ROHS3 compliant, carry MSL Level 1 (Unlimited) moisture sensitivity rating, and are REACH unaffected. Substitution does not introduce compliance risks.

Q: What is the pin configuration for the 8-SOIC package?

A: Both parts use the standard 8-SOIC (Small Outline Integrated Circuit) package with 0.154 inch (3.90 mm) width. The pinout is identical between the two parts. Refer to the Texas Instruments LM6132 datasheet for detailed pin configuration and functional descriptions.

Q: Can the LM6132AIMX/NOPB operate across the same supply voltage range as the LM6132AIM?

A: Yes. Both parts operate across the identical supply voltage range of 1.8 V to 24 V. The LM6132AIMX/NOPB maintains the same rail-to-rail output capability and can be used in applications requiring single-supply or dual-supply configurations within this voltage range.

Q: Are there any performance differences in slew rate or bandwidth between the two parts?

A: No. Both parts have identical slew rate (14 V/µs) and gain bandwidth product (11 MHz). There are no performance differences in frequency response or transient response characteristics.