LM5111-1M/NOPB Low-Side Gate Driver IC Equivalent & Substitute Parts

Part Overview

The LM5111-1M/NOPB is a low-side gate driver IC manufactured by Texas Instruments, designed for driving N-channel MOSFETs in power management applications. This device operates with a supply voltage range of 4.6V to 14V and delivers peak output currents of 3A (source) and 5A (sink). The part is currently in Last Time Buy status, indicating end-of-life production. Equivalent and substitute parts are necessary to ensure design continuity, maintain supply chain flexibility, and support long-term product availability for applications requiring low-side gate driving functionality.

Key Parameters

Parameter	LM5111-1M/NOPB
Manufacturer	Texas Instruments
Driven Configuration	Low-Side
Number of Drivers	2
Gate Type	N-Channel MOSFET
Voltage - Supply	4.6V ~ 14V
Logic Voltage - VIL, VIH	0.8V, 2.2V
Current - Peak Output (Source, Sink)	3A, 5A
Input Type	Non-Inverting
Rise / Fall Time (Typ)	14ns, 12ns
Operating Temperature	-40°C ~ 125°C (TJ)
Package / Case	8-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the LM5111-1M/NOPB are selected based on the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

Driven Configuration: Low-Side only
Number of Drivers: 2 independent channels
Input Type: Non-Inverting
Package / Case: 8-SOIC form factor (0.154", 3.90mm Width)
Mounting Type: Surface Mount

Secondary Compatibility Parameters:

Gate Type: N-Channel MOSFET (primary), with some alternatives supporting IGBT and P-Channel MOSFET
Voltage - Supply: Minimum 4.6V operation required; substitutes with higher maximum ratings (up to 20V) remain compatible
Logic Voltage Thresholds: VIL ≤ 0.8V and VIH ≥ 2.2V ensure logic compatibility
Current - Peak Output: Minimum 3A source / 5A sink required for equivalent performance
Operating Temperature: -40°C to 125°C minimum range required
RoHS3 Compliance and MSL ratings ensure regulatory and manufacturing compatibility

Substitutes are grouped into two categories: direct equivalents (identical electrical specifications and packaging) and functional alternatives (compatible electrical performance with potential design considerations for enhanced specifications).

Parameter Comparison

Part Number	Manufacturer	Supply Voltage	Peak Output (Source, Sink)	Rise / Fall Time (Typ)	Operating Temp	Package	Product Status	MSL
LM5111-1M/NOPB	Texas Instruments	4.6V ~ 14V	3A, 5A	14ns, 12ns	-40°C ~ 125°C	8-SOIC	Last Time Buy	1
LM5111-1MX/NOPB	Texas Instruments	4.6V ~ 14V	3A, 5A	14ns, 12ns	-40°C ~ 125°C	8-SOIC	Active	1
ADP3654ARDZ-RL	Analog Devices Inc.	4.5V ~ 18V	4A, 4A	10ns, 10ns	-40°C ~ 125°C	8-SOIC-EP	Active	3
MCP1404-E/SN	Microchip Technology	4.5V ~ 18V	4.5A, 4.5A	15ns, 18ns	-40°C ~ 150°C	8-SOIC	Active	1
MCP1404T-E/SN	Microchip Technology	4.5V ~ 18V	4.5A, 4.5A	15ns, 18ns	-40°C ~ 150°C	8-SOIC	Active	1
MIC4124YME	Microchip Technology	4.5V ~ 20V	3A, 3A	11ns, 11ns	-40°C ~ 125°C	8-SOIC-EP	Active	2
MIC4124YME-TR	Microchip Technology	4.5V ~ 20V	3A, 3A	11ns, 11ns	-40°C ~ 125°C	8-SOIC-EP	Active	3
MIC4127YME	Microchip Technology	4.5V ~ 20V	1.5A, 1.5A	20ns, 18ns	-40°C ~ 125°C	8-SOIC-EP	Active	2
MIC4127YME-TR	Microchip Technology	4.5V ~ 20V	1.5A, 1.5A	20ns, 18ns	-40°C ~ 125°C	8-SOIC-EP	Active	3
MIC4424YM	Microchip Technology	4.5V ~ 18V	3A, 3A	28ns, 32ns	-40°C ~ 150°C	8-SOIC	Active	1
MIC4424YM-TR	Microchip Technology	4.5V ~ 18V	3A, 3A	28ns, 32ns	-40°C ~ 150°C	8-SOIC	Active	1

Engineering Selection Recommendations

Tier 1 - Direct Equivalent (Recommended Primary Substitute): LM5111-1MX/NOPB is the manufacturer-recommended equivalent, offering identical electrical specifications and packaging to the LM5111-1M/NOPB. This part maintains Active product status and is available in higher quantities, making it the preferred choice for design continuity with zero redesign effort.

Tier 2 - Functional Alternatives (Compatible with Design Review): MCP1404-E/SN and MCP1404T-E/SN (Microchip Technology) provide enhanced specifications including higher peak output current (4.5A source and sink), extended operating temperature range (-40°C to 150°C), and Active product status. These parts require supply voltage minimum of 4.5V but remain compatible with the LM5111-1M/NOPB in applications where the 4.6V lower limit is not critical.

MIC4124YME and MIC4124YME-TR offer faster rise/fall times (11ns) and extended supply voltage range (4.5V to 20V) with equivalent peak output current (3A source and sink). These parts are suitable for applications requiring improved switching performance.

Tier 3 - Limited Current Applications: MIC4127YME and MIC4127YME-TR are suitable only for applications where peak output current requirements do not exceed 1.5A source and sink. These parts feature slower switching times (20ns rise, 18ns fall) and are not recommended as direct replacements for the LM5111-1M/NOPB in high-current gate driving scenarios.

Compliance Considerations: All substitute parts maintain ROHS3 compliance and EAR99 export classification, consistent with the original part. Moisture sensitivity levels vary; parts with MSL 1 (Unlimited) are preferred for applications with extended storage or high-humidity manufacturing environments.

Frequently Asked Questions (FAQ)

Q: Can I use MIC4127YME as a direct replacement for LM5111-1M/NOPB? A: MIC4127YME is not recommended as a direct replacement. While it shares the same 8-SOIC package and low-side gate driver configuration, its peak output current is limited to 1.5A source and sink, compared to the LM5111-1M/NOPB specification of 3A source and 5A sink. Use MIC4127YME only in applications where output current requirements do not exceed 1.5A.

Q: What is the difference between LM5111-1M/NOPB and LM5111-1MX/NOPB? A: Both parts are electrically identical with matching specifications. The primary difference is packaging format: LM5111-1M/NOPB is supplied in Tube packaging, while LM5111-1MX/NOPB is available in Cut Tape and Digi-Reel formats. LM5111-1MX/NOPB has Active product status and higher inventory availability.

Q: Can I substitute ADP3654ARDZ-RL for LM5111-1M/NOPB in a 4.6V supply application? A: No. ADP3654ARDZ-RL requires a minimum supply voltage of 4.5V and is not compatible with applications operating at 4.6V. Use this substitute only in designs where the supply voltage is 4.5V or higher.

Q: Are there any package differences between substitute parts? A: Yes. Most Microchip alternatives (MIC4124YME, MIC4127YME, ADP3654ARDZ-RL) use 8-SOIC-EP (Exposed Pad) packaging, while the original LM5111-1M/NOPB and some alternatives (MCP1404, MIC4424YM) use standard 8-SOIC packaging without exposed pad. Both packages are mechanically compatible in 8-SOIC footprints, but the exposed pad variant provides enhanced thermal performance.

Q: Which substitute offers the fastest switching performance? A: ADP3654ARDZ-RL provides the fastest rise and fall times at 10ns each, followed by MIC4124YME at 11ns. The original LM5111-1M/NOPB has rise/fall times of 14ns and 12ns respectively. Faster switching times reduce gate charge delay and improve overall system efficiency in high-frequency applications.

Q: What is the significance of MSL (Moisture Sensitivity Level) ratings? A: MSL ratings indicate moisture sensitivity during storage and handling. MSL 1 (Unlimited) parts have no moisture sensitivity restrictions. MSL 2 and MSL 3 parts require controlled storage conditions (1 Year and 168 Hours respectively) and may require baking before reflow soldering if storage limits are exceeded. For applications with extended storage or high-volume manufacturing, MSL 1 parts are preferred.

Q: Can I use MIC4424YM in place of LM5111-1M/NOPB? A: MIC4424YM is functionally compatible but has slower switching characteristics (28ns rise, 32ns fall versus 14ns and 12ns). It is suitable for lower-frequency applications where switching speed is not critical. The extended operating temperature range (-40°C to 150°C) makes it advantageous for high-temperature environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message