LM5101CSD/NOPB Equivalent & Substitute Parts

Part Overview

The LM5101CSD/NOPB is a half-bridge gate driver IC manufactured by Texas Instruments, designed for independent N-channel MOSFET control in power management applications. This device operates with a supply voltage range of 9V to 14V and delivers peak output currents of 1A (source and sink). The part is actively produced and RoHS3 compliant, making it suitable for modern industrial and consumer power conversion circuits. Substitute parts are identified when equivalent functional performance, electrical parameters, and mechanical compatibility can be maintained within the specified operating envelope.

Key Parameters

Parameter	Value
Manufacturer	Texas Instruments
Part Number	LM5101CSD/NOPB
Category	Power Management (PMIC)
Driven Configuration	Half-Bridge
Number of Drivers	2
Gate Type	N-Channel MOSFET
Voltage - Supply	9V ~ 14V
Current - Peak Output (Source, Sink)	1A, 1A
Input Type	Non-Inverting
High Side Voltage - Max (Bootstrap)	118 V
Operating Temperature	-40°C ~ 125°C (TJ)
Package / Case	10-WDFN Exposed Pad
Mounting Type	Surface Mount
RoHS Status	RoHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the LM5101CSD/NOPB is determined by the following critical parameters:

Driven Configuration: Must be Half-Bridge
Number of Drivers: Must be 2 independent channels
Gate Type: Must be N-Channel MOSFET
Input Type: Must be Non-Inverting
Supply Voltage Range: Must encompass or be compatible with 9V ~ 14V operation
Peak Output Current: Must meet or exceed 1A (source and sink)
High Side Bootstrap Voltage: Must support minimum 118V operation
Operating Temperature Range: Must cover -40°C ~ 125°C
Mounting Type: Must be Surface Mount
Package Compatibility: Must be compatible with 10-WDFN Exposed Pad footprint
Compliance: Must maintain RoHS3 and REACH compliance status

The ISL2111ARTZ and ISL2111ARTZ-T (Renesas Electronics Corporation) meet all substitution criteria. Both variants share identical electrical specifications and differ only in packaging format (Tray versus Tape & Reel).

Parameter Comparison

Parameter	LM5101CSD/NOPB	ISL2111ARTZ	ISL2111ARTZ-T
Manufacturer	Texas Instruments	Renesas Electronics	Renesas Electronics
Driven Configuration	Half-Bridge	Half-Bridge	Half-Bridge
Number of Drivers	2	2	2
Gate Type	N-Channel MOSFET	N-Channel MOSFET	N-Channel MOSFET
Voltage - Supply	9V ~ 14V	8V ~ 14V	8V ~ 14V
Current - Peak Output (Source, Sink)	1A, 1A	3A, 4A	3A, 4A
Input Type	Non-Inverting	Non-Inverting	Non-Inverting
High Side Voltage - Max (Bootstrap)	118 V	114 V	114 V
Operating Temperature	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)
Package / Case	10-WDFN Exposed Pad	10-WDFN Exposed Pad	10-WDFN Exposed Pad
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant
Product Status	Active	Active	Active

Engineering Selection Recommendations

Both ISL2111ARTZ and ISL2111ARTZ-T are qualified substitutes for the LM5101CSD/NOPB based on functional equivalence and compliance status. All three parts maintain active production status and RoHS3 compliance. The ISL2111 variants demonstrate superior peak output current capability (3A source, 4A sink versus 1A source and sink), providing additional design margin in applications requiring higher gate drive current. The supply voltage range of the ISL2111 (8V ~ 14V) encompasses the LM5101 operating window (9V ~ 14V), ensuring compatibility in existing power supply designs. Bootstrap voltage specification of 114V on the ISL2111 remains within acceptable tolerance for half-bridge topologies designed for the LM5101's 118V rating.

Selection between ISL2111ARTZ (Tray packaging) and ISL2111ARTZ-T (Tape & Reel packaging) depends on procurement and assembly requirements. Both variants are electrically and mechanically identical.

Frequently Asked Questions (FAQ)

Q: Can ISL2111ARTZ directly replace LM5101CSD/NOPB in existing designs?

A: Yes. Both parts share identical half-bridge gate driver architecture, independent dual-channel configuration, non-inverting input logic, and 10-WDFN package footprint. Electrical parameters are compatible across the specified operating range.

Q: What is the difference between ISL2111ARTZ and ISL2111ARTZ-T?

A: The parts are electrically identical. ISL2111ARTZ is supplied in Tray packaging, while ISL2111ARTZ-T is supplied in Tape & Reel format. Selection depends on assembly process requirements and procurement volume.

Q: Are there any bootstrap voltage considerations when substituting?

A: The ISL2111 bootstrap voltage maximum is 114V compared to the LM5101's 118V. This 4V difference is within typical design margins for half-bridge applications and does not restrict substitution.

Q: Do the substitute parts maintain the same compliance certifications?

A: Yes. Both ISL2111ARTZ and ISL2111ARTZ-T are RoHS3 compliant and REACH unaffected, matching the LM5101CSD/NOPB compliance profile.

Q: What is the impact of higher peak output current on circuit design?

A: The ISL2111 variants provide 3A source and 4A sink capability versus 1A on the LM5101. This enhanced current capacity reduces gate drive impedance and improves switching performance. Existing designs require no modification; the higher current capability is transparent to circuit operation.

Q: Are operating temperature ranges equivalent?

A: Yes. All three parts operate across -40°C to 125°C junction temperature, supporting identical thermal specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message