LM5020MM-1 Equivalent & Substitute Parts

Part Overview

The LM5020MM-1 is a Flyback Regulator Positive Output Step-Up/Step-Down DC-DC Controller IC manufactured by Texas Instruments in a 10-VSSOP package. This device functions as a transistor driver for single-output flyback topologies with integrated frequency control and soft start features. The main part number LM5020MM-1 carries a Last Time Buy product status, making identification of active equivalent alternatives essential for ongoing design support and procurement planning.

Substiute Parts

LM5020MM-1
Texas InstrumentsIn Stock: 65831LM5020MM-1 Datasheet
LM5020MM-1
Current Part
LM5020MM-1/NOPB
Texas InstrumentsIn Stock: 37274LM5020MM-1/NOPB Datasheet
LM5020MM-1/NOPB
Parametric Equivalent
LM5020MMX-1/NOPB
Texas InstrumentsIn Stock: 37362LM5020MMX-1/NOPB Datasheet
LM5020MMX-1/NOPB
Parametric Equivalent

Key Parameters

Parameter Value
Manufacturer Texas Instruments
Category Power Management (PMIC)
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP
Topology Flyback
Output Type Transistor Driver
Function Step-Up/Step-Down
Output Configuration Positive
Number of Outputs 1
Voltage - Supply (Vcc/Vdd) 8V ~ 15V
Frequency - Switching 200kHz ~ 630kHz
Duty Cycle (Max) 80%
Control Features Frequency Control, Soft Start
Operating Temperature -40°C ~ 125°C (TJ)
Mounting Type Surface Mount
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the LM5020MM-1 is determined by strict parametric matching across the following critical criteria:

Topology & Function: All substitute parts must maintain Flyback topology with Step-Up/Step-Down capability and positive output configuration.

Electrical Specifications: Supply voltage range (8V ~ 15V), switching frequency range (200kHz ~ 630kHz), maximum duty cycle (80%), and control features (Frequency Control, Soft Start) must be identical.

Package & Mounting: All parts must use the 10-VSSOP package in Surface Mount configuration with 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) mechanical compatibility.

Compliance & Environmental: Operating temperature range (-40°C ~ 125°C), RoHS3 compliance, and MSL rating (1 - Unlimited) must match.

Manufacturer: All substitutes are sourced from Texas Instruments to ensure design consistency and supply chain reliability.

The identified substitutes LM5020MM-1/NOPB and LM5020MMX-1/NOPB meet all parametric requirements and differ only in product status (Active vs. Last Time Buy) and packaging designation codes.

Parameter Comparison

Parameter LM5020MM-1 LM5020MM-1/NOPB LM5020MMX-1/NOPB
Manufacturer Texas Instruments Texas Instruments Texas Instruments
Package / Case 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package 10-VSSOP 10-VSSOP 10-VSSOP
Topology Flyback Flyback Flyback
Output Type Transistor Driver Transistor Driver Transistor Driver
Function Step-Up/Step-Down Step-Up/Step-Down Step-Up/Step-Down
Output Configuration Positive Positive Positive
Number of Outputs 1 1 1
Voltage - Supply (Vcc/Vdd) 8V ~ 15V 8V ~ 15V 8V ~ 15V
Frequency - Switching 200kHz ~ 630kHz 200kHz ~ 630kHz 200kHz ~ 630kHz
Duty Cycle (Max) 80% 80% 80%
Control Features Frequency Control, Soft Start Frequency Control, Soft Start Frequency Control, Soft Start
Operating Temperature -40°C ~ 125°C (TJ) -40°C ~ 125°C (TJ) -40°C ~ 125°C (TJ)
Mounting Type Surface Mount Surface Mount Surface Mount
RoHS Status ROHS3 Compliant ROHS3 Compliant ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited) 1 (Unlimited) 1 (Unlimited)
Product Status Last Time Buy Active Active

Engineering Selection Recommendations

LM5020MM-1/NOPB is the primary substitute for the LM5020MM-1. This part carries Active product status, ensuring long-term availability and supply chain continuity. The /NOPB designation indicates lead-free plating compliance. Current inventory of 37,200 units supports immediate procurement requirements.

LM5020MMX-1/NOPB is an alternative substitute with identical electrical and mechanical specifications. The MMX variant designation reflects extended temperature or performance binning within the same package family. This part also maintains Active status with 37,300 units in stock.

Both substitutes are fully compatible with existing PCB layouts and design implementations of the LM5020MM-1. Selection between LM5020MM-1/NOPB and LM5020MMX-1/NOPB depends on specific application requirements and supplier availability at the time of procurement. All three part numbers share identical electrical performance, package dimensions, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can LM5020MM-1/NOPB be used as a direct replacement for LM5020MM-1?

A: Yes. Both parts are electrically and mechanically identical. The /NOPB suffix indicates lead-free plating compliance. PCB layouts, schematic connections, and design parameters require no modification.

Q: What is the difference between LM5020MM-1/NOPB and LM5020MMX-1/NOPB?

A: Both parts meet identical parametric specifications for topology, electrical performance, package, and compliance. The MMX designation indicates a variant within the LM5020 product family. Selection is based on availability and application-specific requirements.

Q: Why is the original LM5020MM-1 marked as Last Time Buy?

A: Last Time Buy status indicates the manufacturer has discontinued active production. Existing inventory remains available, but long-term supply cannot be guaranteed. Substitution to active part numbers (LM5020MM-1/NOPB or LM5020MMX-1/NOPB) is recommended for new designs and ongoing production.

Q: Are there any package or pinout differences between these part numbers?

A: No. All three part numbers use the 10-VSSOP package with identical pinout, mechanical dimensions (0.118", 3.00mm Width), and Surface Mount configuration.

Q: Do these substitutes maintain RoHS3 and REACH compliance?

A: Yes. All three part numbers are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All three part numbers carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)