LM4040DEM3-2.0 Equivalent & Substitute Parts

Part Overview

The LM4040DEM3-2.0 is a shunt voltage reference IC manufactured by Texas Instruments, delivering a fixed 2.048V output with ±1% tolerance in a SOT-23-3 surface mount package. This component is classified as Last Time Buy, indicating discontinued production. Shunt voltage references are essential in precision analog circuits for establishing stable reference voltages in data acquisition systems, analog-to-digital converters, and calibration circuits. Due to the Last Time Buy status, identifying equivalent and substitute parts is necessary for design continuity and long-term supply chain management.

Key Parameters

Parameter	Value
Reference Type	Shunt
Output Voltage (Fixed)	2.048V
Output Current	15 mA
Tolerance	±1%
Temperature Coefficient	150ppm/°C
Noise (10Hz to 10kHz)	35µVrms
Cathode Current	73 µA
Operating Temperature Range	-40°C to 125°C
Package	SOT-23-3
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the LM4040DEM3-2.0 are classified based on the following critical parameters that determine functional equivalence:

Primary Substitution Criteria:

Fixed output voltage of 2.048V
Output current capability of 15 mA
SOT-23-3 package compatibility
Surface mount mounting type
Operating temperature range of -40°C to 125°C

Secondary Differentiation Parameters:

Tolerance specification (±1%, ±0.2%, ±0.1%, ±0.5%)
Temperature coefficient (75ppm/°C to 150ppm/°C)
Cathode current consumption (60 µA to 80 µA)
Noise characteristics (10Hz to 10kHz range)
Product status and availability

Substitutes are grouped into three categories: parametric equivalents from Texas Instruments with identical tolerance, manufacturer-recommended alternatives from Analog Devices with improved specifications, and alternative grades from Maxim Integrated with varying tolerance and temperature performance.

Parameter Comparison

Part Number	Manufacturer	Tolerance	Temp Coeff (ppm/°C)	Cathode Current (µA)	Noise 10Hz-10kHz (µVrms)	Operating Temp (°C)	Product Status	Packaging
LM4040DEM3-2.0	Texas Instruments	±1%	150	73	35	-40 to 125	Last Time Buy	Tape & Reel
LM4040D20QDBZR	Texas Instruments	±1%	150	80	35	-40 to 125	Active	Tape & Reel
LM4040D20QDBZT	Texas Instruments	±1%	150	80	35	-40 to 125	Active	Tape & Reel
LM4040DEM3-2.0/NOPB	Texas Instruments	±1%	150	73	35	-40 to 125	Active	Cut Tape & Digi-Reel
ADR5040ARTZ-R2	Analog Devices Inc.	±0.2%	100	60	120	-40 to 125	Discontinued at DiGi Electronics	Not Specified
ADR5040ARTZ-REEL7	Analog Devices Inc.	±0.2%	100	60	120	-40 to 125	Active	Cut Tape & Digi-Reel
ADR5040BRTZ-REEL7	Analog Devices Inc.	±0.1%	75	60	120	-40 to 125	Active	Cut Tape & Digi-Reel
LM4040AEM3-2.1+T	Analog Devices Inc./Maxim Integrated	±0.1%	100	65	28	-40 to 125	Active	Tape & Reel
LM4040AIM3-2.1+T	Analog Devices Inc./Maxim Integrated	±0.1%	100	65	28	-40 to 85	Active	Cut Tape & Digi-Reel
LM4040BIM3-2.1+T	Analog Devices Inc./Maxim Integrated	±0.2%	100	65	28	-40 to 85	Active	Tape & Reel
LM4040CEM3-2.1+T	Analog Devices Inc./Maxim Integrated	±0.5%	100	65	28	-40 to 125	Active	Tape & Reel

Engineering Selection Recommendations

Direct Parametric Equivalents (Recommended for Drop-In Replacement):

LM4040D20QDBZR and LM4040D20QDBZT are direct parametric equivalents from Texas Instruments with identical tolerance (±1%), temperature coefficient (150ppm/°C), and noise specifications. Both maintain Active product status and are available in Tape & Reel packaging. The primary difference is cathode current specification (80 µA versus 73 µA in the original), which remains within acceptable operating margins for most applications. LM4040DEM3-2.0/NOPB provides identical electrical performance with the same cathode current (73 µA) and is available in Cut Tape & Digi-Reel packaging, offering flexibility in procurement quantities.

Higher-Precision Alternatives (Improved Specifications):

ADR5040BRTZ-REEL7 from Analog Devices Inc. offers superior tolerance (±0.1% versus ±1%), lower temperature coefficient (75ppm/°C versus 150ppm/°C), and reduced cathode current (60 µA). This part is Active and widely available (65,665 pcs in stock). The trade-off is increased noise specification (120µVrms versus 35µVrms in the 10Hz to 10kHz band), which may or may not be acceptable depending on application noise requirements.

ADR5040ARTZ-REEL7 provides intermediate precision (±0.2% tolerance) with similar advantages to the ADR5040BRTZ variant, including lower temperature coefficient (100ppm/°C) and reduced cathode current (60 µA). This part is Active with substantial inventory availability (108,981 pcs).

Maxim Integrated Grade Options:

LM4040AEM3-2.1+T and LM4040AIM3-2.1+T deliver ±0.1% tolerance with improved noise performance (28µVrms versus 35µVrms). LM4040AEM3-2.1+T supports the full -40°C to 125°C temperature range, while LM4040AIM3-2.1+T is qualified to AEC-Q100 automotive standards with -40°C to 85°C operating range. Both are Active with good inventory levels.

LM4040BIM3-2.1+T provides ±0.2% tolerance with the same noise and temperature coefficient advantages, suitable for applications requiring moderate precision with extended temperature performance.

LM4040CEM3-2.1+T offers ±0.5% tolerance for cost-sensitive applications maintaining full temperature range support.

Compliance and Certification:

All listed substitutes maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing processes. RoHS and REACH compliance is consistent across all alternatives.

Frequently Asked Questions (FAQ)

Q: Can LM4040D20QDBZR or LM4040D20QDBZT be used as direct replacements for LM4040DEM3-2.0?

A: Yes. Both parts are parametric equivalents with identical output voltage (2.048V), tolerance (±1%), temperature coefficient (150ppm/°C), and noise specifications (35µVrms). The cathode current specification differs slightly (80 µA versus 73 µA), but this remains within acceptable operating margins. Both are Active products from Texas Instruments, making them suitable for immediate substitution.

Q: What is the advantage of using ADR5040BRTZ-REEL7 over the Texas Instruments equivalents?

A: ADR5040BRTZ-REEL7 provides superior tolerance (±0.1% versus ±1%), lower temperature coefficient (75ppm/°C versus 150ppm/°C), and reduced cathode current consumption (60 µA versus 73-80 µA). These improvements result in better voltage stability across temperature and lower power consumption. The trade-off is increased noise specification (120µVrms versus 35µVrms in the 10Hz to 10kHz band). Selection depends on whether your application prioritizes voltage accuracy or noise performance.

Q: Are all substitute parts available in SOT-23-3 packaging?

A: Yes. All listed substitutes use the SOT-23-3 package (also designated TO-236-3 or SC-59), ensuring mechanical and electrical compatibility with the original LM4040DEM3-2.0 footprint.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both are surface mount packaging formats. Tape & Reel is supplied on continuous carrier tape suitable for high-volume automated assembly. Cut Tape & Digi-Reel provides flexibility for lower-volume orders or mixed component procurement. Electrical performance is identical; the difference is in procurement and handling logistics.

Q: Can LM4040AIM3-2.1+T be used in applications requiring -40°C to 125°C operation?

A: No. LM4040AIM3-2.1+T is specified for -40°C to 85°C operation and includes AEC-Q100 automotive qualification. For full -40°C to 125°C range, use LM4040AEM3-2.1+T, which provides identical electrical specifications without the automotive temperature restriction.

Q: Why does LM4040DEM3-2.0 have Last Time Buy status?

A: Last Time Buy status indicates Texas Instruments has discontinued production of this specific part number variant. Customers are advised to transition to active alternatives. LM4040DEM3-2.0/NOPB (same electrical specifications, different packaging format) and the LM4040D20QDBZR/QDBZT variants remain Active and are recommended for new designs.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and are suitable for applications requiring RoHS certification. Moisture sensitivity level is MSL 1 (Unlimited) across all alternatives, ensuring compatibility with standard PCB assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message