LM358PE3 Equivalent & Substitute Parts

Part Overview

The LM358PE3 is a general-purpose operational amplifier manufactured by Texas Instruments, featuring dual circuits in an 8-DIP through-hole package. This device is classified as Last Time Buy, indicating discontinued production with limited remaining inventory of 9300 pieces. The LM358PE3 operates across a wide supply voltage range of 3V to 30V and is suitable for general-purpose amplification applications requiring moderate bandwidth and low input bias current.

Due to Last Time Buy status, identifying equivalent and substitute parts is essential for design continuity and long-term component availability. Substitute parts must maintain electrical compatibility across critical parameters including supply voltage range, output current capability, and package configuration.

Substiute Parts

LM358PE3

Texas InstrumentsIn Stock: 9409LM358PE3 Datasheet

Current PartRFQ

LM358P

Texas InstrumentsIn Stock: 53879LM358P Datasheet

MFR RecommendedRFQ

AD812ANZ

Analog Devices Inc.In Stock: 1450AD812ANZ Datasheet

MFR RecommendedRFQ

AD828ANZ

Analog Devices Inc.In Stock: 3234AD828ANZ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the LM358PE3 is based on strict electrical and mechanical compatibility across the following critical parameters:

Primary Compatibility Criteria:

• Package configuration: 8-DIP (0.300", 7.62mm) through-hole mounting
• Number of circuits: 2 dual-channel configuration
• Supply voltage range overlap: Minimum 3V to maximum 30V
• Output current per channel: Minimum 40 mA
• Pin-to-pin functional equivalence

Substitute Classification:

Tier 1 - Direct Replacement (Identical Electrical Specifications): LM358P maintains all electrical parameters identical to LM358PE3, including slew rate (0.3V/µs), gain bandwidth product (700 kHz), input bias current (20 nA), and supply voltage range (3V to 30V). The primary distinction is product status: LM358P is Active with 53,800 pieces in inventory, compared to LM358PE3 Last Time Buy status. Both share the same base product number (LM358) and package configuration.

Tier 2 - Functional Substitutes (Enhanced Performance, Different Topology): AD812ANZ and AD828ANZ are current-feedback and voltage-feedback video amplifiers respectively, both manufactured by Analog Devices Inc. These devices feature significantly higher bandwidth and slew rate specifications but maintain 8-DIP package compatibility and dual-circuit configuration. Supply voltage ranges differ: AD812ANZ supports 2.4V to 36V (single) or ±1.2V to ±18V (dual), while AD828ANZ supports 5V to 36V (single) or ±2.5V to ±18V (dual). Both devices provide 50 mA output current per channel, exceeding LM358PE3 specifications.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement Applications:

LM358P is the recommended substitute for LM358PE3 in applications requiring identical electrical performance. Both devices maintain the same gain bandwidth product (700 kHz), slew rate (0.3V/µs), input bias current (20 nA), and supply voltage range (3V to 30V). LM358P is classified as Active product status with significantly higher inventory availability (53,800 pieces), ensuring long-term supply continuity. Both parts are ROHS3 compliant and share identical package configuration (8-DIP through-hole). Selection of LM358P eliminates Last Time Buy risk while maintaining full electrical compatibility.

For Enhanced Performance Applications:

AD812ANZ and AD828ANZ are suitable substitutes when application requirements permit higher bandwidth and slew rate operation. AD812ANZ provides current-feedback topology with 145 MHz bandwidth and 1600 V/µs slew rate, while AD828ANZ provides voltage-feedback topology with 130 MHz bandwidth and 450 V/µs slew rate. Both devices maintain 8-DIP package compatibility and dual-circuit configuration. Supply voltage ranges differ from LM358PE3: AD812ANZ minimum supply is 2.4V (single) or ±1.2V (dual), and AD828ANZ minimum supply is 5V (single) or ±2.5V (dual). Both devices provide 50 mA output current per channel, exceeding LM358PE3 specifications. These substitutes are appropriate only when circuit design accommodates higher bandwidth characteristics and modified supply voltage requirements. Both are Active products with ROHS3 compliance.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, consistent with LM358PE3 regulatory requirements. ECCN classification (EAR99) and HTSUS code (8542.33.0001) remain unchanged across all substitute options.

Frequently Asked Questions (FAQ)

Q1: Can LM358P be used as a direct replacement for LM358PE3 in existing designs?

A: Yes. LM358P maintains identical electrical specifications including slew rate (0.3V/µs), gain bandwidth product (700 kHz), input bias current (20 nA), voltage input offset (3 mV), and supply voltage range (3V to 30V). Both devices feature dual circuits in 8-DIP through-hole packages with identical pin configurations. No circuit modifications are required for substitution.

Q2: What are the key differences between LM358PE3 and the Analog Devices substitutes (AD812ANZ and AD828ANZ)?

A: The primary differences are amplifier topology and performance specifications. LM358PE3 is a general-purpose voltage-feedback amplifier with 700 kHz bandwidth and 0.3V/µs slew rate. AD812ANZ is a current-feedback amplifier with 145 MHz bandwidth and 1600V/µs slew rate. AD828ANZ is a voltage-feedback amplifier with 130 MHz bandwidth and 450V/µs slew rate. Both Analog Devices devices feature significantly higher bandwidth and slew rate, making them suitable for video and high-speed applications. Supply voltage ranges also differ: AD812ANZ supports 2.4V to 36V (single) or ±1.2V to ±18V (dual), while AD828ANZ supports 5V to 36V (single) or ±2.5V to ±18V (dual). These substitutes require circuit design verification for bandwidth and supply voltage compatibility.

Q3: Are all substitute parts available in the same 8-DIP package configuration?

A: Yes. LM358P, AD812ANZ, and AD828ANZ are all available in 8-DIP (0.300", 7.62mm) through-hole packages. All devices maintain identical package dimensions and pin spacing, enabling direct physical substitution on printed circuit boards designed for 8-DIP components.

Q4: What is the significance of LM358PE3 being classified as Last Time Buy?

A: Last Time Buy status indicates that Texas Instruments has discontinued production of LM358PE3, with remaining inventory limited to 9300 pieces. This classification necessitates identification of substitute parts for long-term design continuity. LM358P, classified as Active product with 53,800 pieces in inventory, provides the same electrical performance with assured long-term availability.

Q5: Do the substitute parts maintain the same RoHS and REACH compliance as LM358PE3?

A: Yes. LM358P, AD812ANZ, and AD828ANZ are all ROHS3 compliant and REACH Unaffected, matching LM358PE3 regulatory status. ECCN classification (EAR99) and HTSUS code (8542.33.0001) are identical across all parts.

Q6: Which substitute should be selected for low-power applications?

A: LM358P is the optimal choice for low-power applications. It maintains identical supply current specifications to LM358PE3 (500µA for dual channels), compared to AD812ANZ (4.5 mA) and AD828ANZ (14 mA). LM358P provides direct electrical equivalence with no design modifications required.

Q7: Can AD812ANZ or AD828ANZ be used in circuits designed for LM358PE3 without modifications?

A: Substitution of AD812ANZ or AD828ANZ requires circuit design verification. While package compatibility is maintained, these devices feature significantly different electrical characteristics: higher bandwidth (145 MHz and 130 MHz respectively versus 700 kHz), higher slew rate (1600V/µs and 450V/µs respectively versus 0.3V/µs), and different supply current requirements (4.5 mA and 14 mA respectively versus 500µA). Supply voltage ranges also differ. These substitutes are appropriate only when application requirements accommodate enhanced performance specifications and modified supply voltage parameters.