LM358DRG3 Equivalent & Substitute Parts

Part Overview

The LM358DRG3 is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in 8-SOIC surface mount packaging. This part is classified as Last Time Buy, indicating discontinued production status. The LM358DRG3 operates across a supply voltage range of 3V to 30V with a gain bandwidth product of 700 kHz and slew rate of 0.3V/µs, making it suitable for general-purpose amplification applications requiring moderate bandwidth performance.

Due to Last Time Buy status, identifying equivalent and substitute parts is necessary to ensure design continuity and maintain supply chain reliability for ongoing production requirements.

Key Parameters

Parameter	LM358DRG3 Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Slew Rate	0.3	V/µs
Gain Bandwidth Product	700	kHz
Current - Input Bias	20	nA
Voltage - Input Offset	3	mV
Current - Supply (x2 Channels)	500	µA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	3	V
Voltage - Supply Span (Max)	30	V
Operating Temperature	0 to 70	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the LM358DRG3 is determined by the following critical parameters:

Primary Compatibility Criteria:

Dual-channel (2 circuit) general-purpose operational amplifier configuration
8-SOIC surface mount package with 3.90mm width
Supply voltage range minimum of 3V and maximum of at least 30V
Output current capability of 40 mA per channel
Moisture Sensitivity Level of 1 (Unlimited) or equivalent
RoHS3 compliance and REACH unaffected status

Secondary Performance Criteria:

Slew rate of 0.3V/µs or greater
Gain bandwidth product of 700 kHz or greater
Input bias current of 20 nA or lower
Input offset voltage of 3 mV or lower
Supply current per channel of 500µA or lower

Substitute parts are grouped into two categories based on performance alignment:

Category A - Direct Functional Equivalents: Parts meeting or exceeding all primary and secondary criteria with identical or superior electrical performance within the specified operating temperature range.

Category B - Compatible Alternatives: Parts meeting all primary criteria with acceptable performance trade-offs in secondary parameters, suitable for applications where enhanced performance specifications are not required.

Parameter Comparison

Part Number	Manufacturer	Packaging	GBW (kHz)	Slew Rate (V/µs)	Input Bias (nA)	Input Offset (mV)	Supply Current (µA)	Vcc Max (V)	Temp Range (°C)	Product Status
LM358DRG3	Texas Instruments	Tape & Reel (TR)	700	0.3	20	3	500	30	0 to 70	Last Time Buy
LM358DR	Rohm Semiconductor	Cut Tape (CT) & Digi-Reel®	700	0.3	20	1	600	32	-40 to 85	Not For New Designs
LM358M/NOPB	Texas Instruments	Tube	1000	—	45	2	1000	32	0 to 70	Active
LM358MX/NOPB	Texas Instruments	Cut Tape (CT) & Digi-Reel®	1000	—	45	2	1000	32	0 to 70	Active
BA2904SF-E2	Rohm Semiconductor	Cut Tape (CT) & Digi-Reel®	500	0.2	20	2	500	32	-40 to 105	Active
LM2904DR2G	onsemi	Cut Tape (CT) & Digi-Reel®	1000	—	45	2	800	26	-40 to 85	Active
LM2904S-13	Diodes Incorporated	Cut Tape (CT) & Digi-Reel®	700	0.3	20	2	700	36	-40 to 125	Active
LM2904VDR2G	onsemi	Cut Tape (CT) & Digi-Reel®	1000	—	45	7	1500	32	-40 to 125	Active
LM358ADR2G	onsemi	Cut Tape (CT) & Digi-Reel®	1000	—	45	2	800	32	0 to 70	Active
LM358ADT	STMicroelectronics	Cut Tape (CT) & Digi-Reel®	1100	0.6	20	1	700	30	0 to 70	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Operating Temperature Range 0°C to 70°C):

LM358M/NOPB and LM358MX/NOPB are Active status parts from Texas Instruments with identical temperature specifications to the LM358DRG3. Both offer enhanced gain bandwidth product (1 MHz versus 700 kHz) and are suitable for immediate substitution. LM358MX/NOPB is available in Cut Tape & Digi-Reel® packaging, matching the original supply format preference. LM358ADR2G from onsemi provides equivalent temperature range with Active status and higher gain bandwidth product.

For Extended Temperature Range Applications (-40°C to 85°C or broader):

LM358DR from Rohm Semiconductor and LM2904DR2G from onsemi both support extended temperature operation with Active or equivalent status. LM2904S-13 from Diodes Incorporated extends to -40°C to 125°C with Active status and maintains the 700 kHz gain bandwidth product specification.

For Maximum Supply Voltage Headroom:

LM2904S-13 supports maximum supply voltage of 36V, exceeding the LM358DRG3 specification of 30V. This part is suitable for applications requiring higher supply voltage tolerance.

Compliance Considerations:

All substitute parts listed maintain RoHS3 compliance and REACH unaffected status, matching the original part's regulatory requirements. Moisture Sensitivity Level remains at 1 (Unlimited) for all recommended substitutes, ensuring equivalent handling and storage requirements.

Packaging and Availability:

LM358MX/NOPB and LM358ADT are available in Cut Tape & Digi-Reel® format with substantial inventory (74,281 and 122,279 units respectively), supporting high-volume production transitions. LM2904S-13 offers 3,600 units in stock with MSL-3 rating, requiring 168-hour moisture control.

Frequently Asked Questions (FAQ)

Q: Can LM358M/NOPB replace LM358DRG3 in all applications?

A: LM358M/NOPB is functionally compatible with identical operating temperature range (0°C to 70°C) and package type (8-SOIC). The primary difference is packaging format: LM358M/NOPB is supplied in Tube format while LM358DRG3 is Tape & Reel. For applications requiring Tape & Reel format, LM358MX/NOPB is the equivalent alternative.

Q: What is the significance of the 700 kHz versus 1 MHz gain bandwidth product difference?

A: Gain bandwidth product determines the frequency response characteristics of the amplifier. The LM358DRG3 operates at 700 kHz, while substitutes such as LM358M/NOPB and LM2904DR2G operate at 1 MHz. Higher gain bandwidth product provides improved frequency response and faster settling time. Applications designed for 700 kHz performance will function with 1 MHz parts; however, 1 MHz parts cannot be used in applications requiring the lower bandwidth specification.

Q: Are there substitutes available with improved slew rate performance?

A: LM358ADT from STMicroelectronics offers 0.6V/µs slew rate compared to the LM358DRG3 specification of 0.3V/µs, providing faster output voltage transition rates. BA2904SF-E2 from Rohm Semiconductor operates at 0.2V/µs, which is lower than the original specification and suitable only for applications not requiring minimum slew rate performance.

Q: What is the impact of input offset voltage variation among substitutes?

A: Input offset voltage ranges from 1 mV (LM358DR, LM358ADT) to 7 mV (LM2904VDR2G) across substitute options. The LM358DRG3 specifies 3 mV. Lower input offset voltage reduces DC error in precision applications. Substitutes with 1-2 mV offset voltage provide improved precision; those exceeding 3 mV require circuit-level offset compensation evaluation.

Q: Can LM2904 series parts substitute for LM358 series parts?

A: LM2904 and LM358 are functionally equivalent dual operational amplifiers with identical pinout and package compatibility. Both are general-purpose amplifiers in 8-SOIC configuration. Substitution is valid based on electrical parameter compatibility. LM2904DR2G, LM2904S-13, and LM2904VDR2G are all suitable alternatives to LM358DRG3 when electrical specifications align.

Q: What is the difference between Cut Tape & Digi-Reel® and Tape & Reel packaging?

A: Both are surface mount tape formats suitable for automated assembly. Tape & Reel (TR) is the original format for LM358DRG3. Cut Tape & Digi-Reel® is an alternative tape format offered by distributors. Both formats are compatible with standard pick-and-place equipment; verify tape specifications with your assembly partner before transition.

Q: Why is LM358DR listed as "Not For New Designs"?

A: Product status "Not For New Designs" indicates the manufacturer recommends against using this part in new circuit designs, though existing inventory remains available. For new designs, Active status parts such as LM358M/NOPB, LM358MX/NOPB, or LM358ADT are preferred to ensure long-term supply continuity.

Q: How does operating temperature range affect part selection?

A: The LM358DRG3 operates 0°C to 70°C. Substitutes with extended ranges (-40°C to 85°C or -40°C to 125°C) are suitable for applications requiring broader temperature operation. However, parts with narrower temperature ranges cannot replace the original in applications requiring full 0°C to 70°C performance.

Q: What is Moisture Sensitivity Level (MSL) and why does it matter?

A: MSL indicates moisture absorption sensitivity during storage and handling. MSL-1 (Unlimited) means no moisture control is required. LM2904S-13 is MSL-3, requiring 168-hour moisture control before soldering. If your assembly process does not include moisture bake-out procedures, MSL-1 parts are recommended.

Q: Is LM358ADT suitable for automotive applications?

A: LM358ADT is qualified to AEC-Q100 automotive standard with Automotive grade designation. This part is suitable for automotive applications requiring temperature stability and reliability certification. Non-automotive grade substitutes do not carry automotive qualification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message