LM358DRE4 Equivalent & Substitute Parts

Part Overview

The LM358DRE4 is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in 8-SOIC surface mount packaging. This part is classified as obsolete, indicating it has been discontinued and is no longer recommended for new designs. The LM358DRE4 operates across a supply voltage range of 3V to 30V with a slew rate of 0.3V/µs and gain bandwidth product of 700 kHz. Finding equivalent and substitute parts is necessary due to the obsolete status, ensuring design continuity and long-term component availability for existing applications or legacy system maintenance.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Slew Rate	0.3	V/µs
Gain Bandwidth Product	700	kHz
Current - Input Bias	20	nA
Voltage - Input Offset	3	mV
Current - Supply	500	µA (x2 Channels)
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	3	V
Voltage - Supply Span (Max)	30	V
Operating Temperature	0 to 70	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the LM358DRE4 is determined by strict alignment of electrical and mechanical parameters. The primary substitution criteria are:

Mechanical Compatibility: All substitute parts must use 8-SOIC surface mount packaging with 0.154" (3.90mm) width to ensure PCB footprint compatibility.

Electrical Compatibility: Substitute parts must support the dual-channel (2 circuit) general-purpose amplifier configuration with output current capability of 40 mA per channel and supply voltage range spanning minimum 3V to maximum 30V or higher.

Performance Parameters: Substitute parts must maintain input bias current at or below 20 nA, input offset voltage at or below 3 mV, and slew rate at or above 0.3V/µs to ensure functional equivalence in existing circuit designs.

Compliance Requirements: All substitute parts must maintain ROHS3 compliance and MSL Level 1 rating to meet environmental and handling standards.

Substitute parts are grouped into two categories: (1) Active manufacturer-recommended alternatives with enhanced specifications (higher gain bandwidth product, lower input offset voltage), and (2) Not-for-new-designs alternatives that maintain legacy parameter compatibility.

Parameter Comparison

Part Number	Manufacturer	Product Status	Slew Rate (V/µs)	GBW (kHz)	Input Bias (nA)	Input Offset (mV)	Supply Current (µA)	Output Current (mA)	Supply Span Min (V)	Supply Span Max (V)	Temp Range (°C)	Package
LM358DRE4	Texas Instruments	Obsolete	0.3	700	20	3	500	40	3	30	0 to 70	8-SOIC
LM358AM/NOPB	Texas Instruments	Active	—	1000	45	2	1000	40	3	32	0 to 70	8-SOIC
LM358AMX/NOPB	Texas Instruments	Active	—	1000	45	2	1000	40	3	32	0 to 70	8-SOIC
LM358DR	Rohm Semiconductor	Not For New Designs	0.3	700	20	1	600	40	3	32	-40 to 85	8-SOIC
LM358M/NOPB	Texas Instruments	Active	—	1000	45	2	1000	40	3	32	0 to 70	8-SOIC
LM358MX/NOPB	Texas Instruments	Active	—	1000	45	2	1000	40	3	32	0 to 70	8-SOIC
LM358DR2G	onsemi	Active	—	1000	45	2	800	40	3	32	0 to 70	8-SOIC
BA10358F-E1	Rohm Semiconductor	Active	0.2	500	45	2	700	20	3	32	-40 to 85	8-SOP
BA10358F-E2	Rohm Semiconductor	Active	0.2	500	45	2	700	20	3	32	-40 to 85	8-SOP
BA2904F-E2	Rohm Semiconductor	Active	0.2	500	20	2	500	30	3	32	-40 to 125	8-SOP
BA2904SF-E2	Rohm Semiconductor	Active	0.2	500	20	2	500	30	3	32	-40 to 105	8-SOP

Engineering Selection Recommendations

Primary Substitutes (8-SOIC Package, Direct Footprint Compatibility):

The LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, and LM358MX/NOPB from Texas Instruments are active products offering enhanced performance with 1 MHz gain bandwidth product compared to the original 700 kHz specification. These parts maintain identical 8-SOIC packaging, dual-channel configuration, and 40 mA output current per channel. Supply voltage range extends to 32V maximum, providing improved headroom. These parts are suitable for direct replacement in applications where the enhanced gain bandwidth product does not introduce stability concerns.

The LM358DR2G from onsemi is an active product in 8-SOIC packaging with 1 MHz gain bandwidth product and 800µA supply current specification. This part maintains full electrical compatibility with the original LM358DRE4 within the specified parameter ranges.

Legacy Compatibility Alternative (8-SOIC Package):

The LM358DR from Rohm Semiconductor is classified as not-for-new-designs but maintains the original 0.3V/µs slew rate and 700 kHz gain bandwidth product, providing parameter-matched performance. This part extends operating temperature to -40°C to 85°C and improves supply voltage maximum to 32V. The LM358DR is suitable for legacy system maintenance where parameter matching is prioritized.

Extended Temperature Range Alternatives (8-SOP Package):

The BA2904F-E2 and BA2904SF-E2 from Rohm Semiconductor offer extended operating temperature ranges (-40°C to 125°C and -40°C to 105°C respectively) with matching input bias current of 20 nA. These parts use 8-SOP packaging (0.173", 4.40mm width), which differs from the original 8-SOIC footprint and requires PCB layout modification. Output current per channel is reduced to 30 mA. These alternatives are suitable only when PCB redesign is acceptable and extended temperature operation is required.

Compliance Status:

All substitute parts maintain ROHS3 compliance and MSL Level 1 rating, meeting environmental and handling requirements equivalent to the original LM358DRE4.

Frequently Asked Questions (FAQ)

Q: Can I directly replace LM358DRE4 with LM358AM/NOPB on my existing PCB?

A: Yes. Both parts use identical 8-SOIC packaging with 0.154" (3.90mm) width, ensuring direct footprint compatibility. The LM358AM/NOPB offers enhanced 1 MHz gain bandwidth product versus the original 700 kHz specification. Verify that your circuit design does not depend on the lower bandwidth or higher input offset voltage (2 mV vs. 3 mV) of the original part.

Q: What is the difference between LM358AM/NOPB and LM358AMX/NOPB?

A: Both parts are electrically identical with 1 MHz gain bandwidth product, 45 nA input bias current, and 2 mV input offset voltage. The difference is packaging format: LM358AM/NOPB is supplied in Tube packaging, while LM358AMX/NOPB is supplied in Cut Tape (CT) & Digi-Reel® format. Select based on your procurement and assembly requirements.

Q: Why do BA10358F-E1 and BA10358F-E2 show reduced output current (20 mA vs. 40 mA)?

A: The BA10358 series from Rohm Semiconductor is a different product line with different electrical specifications. While functionally similar as general-purpose dual-channel amplifiers, the reduced output current capability makes these parts suitable only for applications not requiring the full 40 mA per channel output current of the LM358DRE4.

Q: Can I use BA2904F-E2 as a substitute if my application requires extended temperature operation?

A: The BA2904F-E2 extends operating temperature to -40°C to 125°C and maintains matching input bias current of 20 nA. However, this part uses 8-SOP packaging (0.173", 4.40mm width) instead of 8-SOIC (0.154", 3.90mm width), requiring PCB layout modification. Output current is also reduced to 30 mA per channel. Use this part only when PCB redesign is acceptable and extended temperature range is essential.

Q: Is LM358DR from Rohm Semiconductor a suitable replacement?

A: The LM358DR is classified as not-for-new-designs but maintains the original 0.3V/µs slew rate and 700 kHz gain bandwidth product in 8-SOIC packaging. This part is suitable for legacy system maintenance and repair where parameter matching to the original LM358DRE4 is prioritized. For new designs, active alternatives such as LM358AM/NOPB are recommended.

Q: What supply voltage range should I verify when substituting?

A: The original LM358DRE4 operates from 3V to 30V. Most active substitutes (LM358AM/NOPB, LM358M/NOPB, LM358DR2G) extend the maximum to 32V. Verify your circuit design does not depend on the 30V maximum limit. The LM358DR from Rohm also supports 32V maximum, providing improved headroom.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, meeting environmental standards equivalent to the original LM358DRE4.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message