LM358DE4 Equivalent & Substitute Parts

Part Overview

The LM358DE4 is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in an 8-SOIC surface mount package. This part is classified as obsolete, indicating it has been discontinued and is no longer recommended for new designs. The LM358DE4 operates across a supply voltage range of 3V to 30V with a slew rate of 0.3V/µs and a gain bandwidth product of 700 kHz. Finding equivalent and substitute parts is necessary due to the obsolete status, ensuring design continuity and long-term component availability for existing applications or legacy system maintenance.

Key Parameters

Parameter	Value
Manufacturer Part Number	LM358DE4
Manufacturer	Texas Instruments
Category	Linear, Amplifiers
Description	IC OPAMP GP 2 CIRCUIT 8SOIC
Amplifier Type	General Purpose
Number of Circuits	2
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Slew Rate	0.3V/µs
Gain Bandwidth Product	700 kHz
Current - Input Bias	20 nA
Voltage - Input Offset	3 mV
Current - Supply	500µA (x2 Channels)
Current - Output / Channel	40 mA
Voltage - Supply Span (Min)	3 V
Voltage - Supply Span (Max)	30 V
Operating Temperature	0°C ~ 70°C
Product Status	Obsolete
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the LM358DE4 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Number of Circuits: Must be 2 (dual-channel configuration)
Package Type: Must be 8-SOIC or equivalent 8-pin surface mount package
Amplifier Type: Must be General Purpose
Supply Voltage Range: Minimum 3V, Maximum ≥30V
Output Current per Channel: Minimum 40 mA
Input Bias Current: Maximum 45 nA
Voltage Input Offset: Maximum 3 mV
RoHS Compliance: ROHS3 Compliant
Mounting Type: Surface Mount

Secondary Compatibility Parameters:

Gain Bandwidth Product: 700 kHz or higher
Slew Rate: 0.3V/µs or higher
Current Supply: 500µA or higher per channel specification

Substitute parts are grouped into two categories based on package width and thermal operating range compatibility. Texas Instruments active-status parts (LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, LM358MX/NOPB) maintain identical 8-SOIC package dimensions and superior electrical performance. Rohm Semiconductor and onsemi alternatives provide functional equivalence with extended temperature ranges and alternative package widths (8-SOP variants).

Parameter Comparison

Parameter	LM358DE4	LM358AM/NOPB	LM358AMX/NOPB	LM358M/NOPB	LM358MX/NOPB	BA10358F-E1	BA10358F-E2	BA2904F-E2	BA2904SF-E2	LM258DR2G	LM2904DR
Manufacturer	TI	TI	TI	TI	TI	Rohm	Rohm	Rohm	Rohm	onsemi	Rohm
Number of Circuits	2	2	2	2	2	2	2	2	2	2	2
Package / Case	8-SOIC (0.154")	8-SOIC (0.154")	8-SOIC (0.154")	8-SOIC (0.154")	8-SOIC (0.154")	8-SOP (0.173")	8-SOP (0.173")	8-SOP (0.173")	8-SOP (0.173")	8-SOIC (0.154")	8-SOIC (0.154")
Slew Rate	0.3V/µs	—	—	—	—	0.2V/µs	0.2V/µs	0.2V/µs	0.2V/µs	—	0.3V/µs
Gain Bandwidth Product	700 kHz	1 MHz	1 MHz	1 MHz	1 MHz	500 kHz	500 kHz	500 kHz	500 kHz	1 MHz	700 kHz
Current - Input Bias	20 nA	45 nA	45 nA	45 nA	45 nA	45 nA	45 nA	20 nA	20 nA	45 nA	20 nA
Voltage - Input Offset	3 mV	2 mV	2 mV	2 mV	2 mV	2 mV	2 mV	2 mV	2 mV	2 mV	3 mV
Current - Supply	500µA (x2)	1mA	1mA	1mA	1mA	700µA	700µA	500µA	500µA	800µA (x2)	1mA
Current - Output / Channel	40 mA	40 mA	40 mA	40 mA	40 mA	20 mA	20 mA	30 mA	30 mA	40 mA	40 mA
Voltage - Supply Span (Min)	3 V	3 V	3 V	3 V	3 V	3 V	3 V	3 V	3 V	3 V	3 V
Voltage - Supply Span (Max)	30 V	32 V	32 V	32 V	32 V	32 V	32 V	32 V	32 V	32 V	26 V
Operating Temperature	0°C ~ 70°C	0°C ~ 70°C	0°C ~ 70°C	0°C ~ 70°C	0°C ~ 70°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 105°C	-25°C ~ 85°C	-40°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Not For New Designs
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Tier 1 - Direct Replacement (Recommended for New Designs):

The LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, and LM358MX/NOPB are the primary substitutes for the LM358DE4. All four parts are manufactured by Texas Instruments, maintain active product status, and are packaged in the identical 8-SOIC (0.154", 3.90mm Width) configuration. These parts exceed the electrical specifications of the obsolete LM358DE4 with a gain bandwidth product of 1 MHz (versus 700 kHz), improved input offset voltage of 2 mV (versus 3 mV), and extended maximum supply voltage of 32V (versus 30V). The primary difference between these four variants is packaging format: LM358AM/NOPB and LM358M/NOPB are supplied in Tube packaging, while LM358AMX/NOPB and LM358MX/NOPB are supplied in Cut Tape (CT) & Digi-Reel® format. All four maintain ROHS3 compliance and MSL 1 rating. Selection between these variants should be based on procurement and assembly requirements rather than electrical performance.

Tier 2 - Functional Equivalents (Extended Temperature Range):

The LM258DR2G (onsemi) provides functional equivalence with identical 8-SOIC package dimensions and active product status. This part offers a gain bandwidth product of 1 MHz and 40 mA output current per channel, matching the LM358DE4 performance envelope. The LM258DR2G extends the operating temperature range to -25°C ~ 85°C and is supplied in Cut Tape (CT) & Digi-Reel® format with 505,200 units in stock.

Tier 3 - Alternative Package Configurations (Rohm Semiconductor):

The BA10358F-E1, BA10358F-E2, BA2904F-E2, and BA2904SF-E2 (Rohm Semiconductor) provide functional substitution with alternative 8-SOP package dimensions (0.173", 4.40mm Width). These parts maintain the dual-channel general-purpose amplifier configuration and meet the 3V to 32V supply voltage requirement. The BA10358 series offers a 500 kHz gain bandwidth product with extended operating temperature ranges (-40°C ~ 85°C). The BA2904 series provides improved input bias current specifications (20 nA) and extended temperature ratings (-40°C ~ 125°C for BA2904F-E2 and -40°C ~ 105°C for BA2904SF-E2). Package width differences require PCB layout verification before implementation.

Tier 4 - Legacy Compatibility (Not Recommended for New Designs):

The LM2904DR (Rohm Semiconductor, Trophy Series) is classified as "Not For New Designs" and should be used only for legacy system maintenance or direct replacement in existing applications. This part matches the LM358DE4 electrical specifications (0.3V/µs slew rate, 700 kHz gain bandwidth product, 20 nA input bias current, 3 mV input offset voltage) but has a reduced maximum supply voltage of 26V and extended operating temperature range of -40°C ~ 125°C.

Frequently Asked Questions (FAQ)

Q1: Can I directly replace LM358DE4 with LM358AM/NOPB without PCB modifications?

A: Yes. The LM358AM/NOPB is pin-compatible and uses the identical 8-SOIC (0.154", 3.90mm Width) package. No PCB layout changes are required. The LM358AM/NOPB provides superior electrical performance with 1 MHz gain bandwidth product versus the original 700 kHz specification.

Q2: What is the difference between LM358AMX/NOPB and LM358AM/NOPB?

A: Both parts are electrically identical with matching electrical specifications and 8-SOIC package dimensions. The difference is packaging format: LM358AM/NOPB is supplied in Tube packaging, while LM358AMX/NOPB is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on assembly line requirements and procurement preferences.

Q3: Why do Rohm Semiconductor BA10358F and BA2904F series have different package widths?

A: The BA10358F series uses an 8-SOP package with 0.173" (4.40mm) width, while the LM358DE4 uses 8-SOIC with 0.154" (3.90mm) width. This 0.019" difference requires verification of PCB pad spacing and solder mask clearances before implementation. Direct footprint compatibility cannot be assumed.

Q4: Is the LM2904DR suitable for new designs?

A: No. The LM2904DR is classified as "Not For New Designs" by the manufacturer. It should be used only for legacy system maintenance or direct replacement in existing applications where the LM358DE4 was originally specified. For new designs, use LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, or LM358MX/NOPB.

Q5: What are the key electrical differences between LM358DE4 and its active substitutes?

A: The LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, and LM358MX/NOPB offer improved specifications: gain bandwidth product increased from 700 kHz to 1 MHz, input offset voltage reduced from 3 mV to 2 mV, and maximum supply voltage extended from 30V to 32V. Input bias current increases from 20 nA to 45 nA. These improvements are generally beneficial for most general-purpose amplifier applications.

Q6: Can I use BA10358F-E2 as a direct replacement for LM358DE4?

A: Electrical substitution is possible, but package compatibility requires verification. The BA10358F-E2 uses an 8-SOP package (0.173" width) versus the LM358DE4's 8-SOIC package (0.154" width). PCB pad spacing and solder mask clearances must be checked. Additionally, the BA10358F-E2 has reduced output current per channel (20 mA versus 40 mA) and lower gain bandwidth product (500 kHz versus 700 kHz).

Q7: What is the inventory status of substitute parts?

A: LM358MX/NOPB has the highest inventory with 74,281 units in stock. BA10358F-E2 has 150,300 units available. LM258DR2G has 505,200 units in stock. All recommended Tier 1 and Tier 2 substitutes maintain active product status with substantial inventory levels, ensuring long-term availability.

Q8: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed in this document maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of the LM358DE4.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message