LM358D Equivalent & Substitute Parts

Part Overview

The LM358D is a general-purpose operational amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This device integrates two independent amplifier circuits and operates across a supply voltage range of 3V to 30V with an operating temperature range of 0°C to 70°C. The LM358D is classified as obsolete, indicating it is no longer in active production. Finding equivalent and substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing manufacturing requirements for applications utilizing this amplifier topology.

Key Parameters

Parameter	Value	Unit
Manufacturer Part Number	LM358D	—
Manufacturer	Texas Instruments	—
Category	Linear, Amplifiers	—
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Slew Rate	0.3	V/µs
Gain Bandwidth Product	700	kHz
Current - Input Bias	20	nA
Voltage - Input Offset	3	mV
Current - Supply	500	µA (x2 Channels)
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	3	V
Voltage - Supply Span (Max)	30	V
Operating Temperature	0 to 70	°C
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitution of the LM358D is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Package type: 8-SOIC surface mount configuration with 0.154" (3.90mm) width
Number of circuits: 2 independent amplifier channels
Supply voltage range: Minimum 3V, Maximum 30V or higher
Operating temperature compatibility: 0°C to 70°C minimum coverage
Output current per channel: 40 mA minimum
Input bias current: 20 nA or lower
Input offset voltage: 3 mV or lower
RoHS3 compliance and MSL Level 1 rating

Substitution Logic: Substitute parts are grouped into two categories based on electrical performance alignment:

Category A - Direct Performance Equivalents (Texas Instruments LM358 Series): Parts LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, and LM358MX/NOPB share the identical 8-SOIC package footprint and base product number. These parts operate within the required supply voltage range (3V to 32V) and maintain surface mount compatibility. All are classified as Active products with ROHS3 compliance and MSL Level 1 rating.

Category B - Functional Equivalents (Alternative Manufacturers): Parts BA10358F-E1, BA10358F-E2, BA2904F-E2, BA2904SF-E2, LM258DR2G, and LM2904DR provide equivalent dual-channel general-purpose amplifier functionality in 8-SOIC or 8-SOP packages. These parts meet the core electrical requirements for supply voltage, output current, and input characteristics while maintaining surface mount configuration and compliance certifications.

Parameter Comparison

Part Number	Manufacturer	Package	Slew Rate (V/µs)	GBW (kHz)	Input Bias (nA)	Input Offset (mV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Status
LM358D	Texas Instruments	8-SOIC	0.3	700	20	3	500	40	3	30	0 to 70	Obsolete
LM358AM/NOPB	Texas Instruments	8-SOIC	—	1000	45	2	1000	40	3	32	0 to 70	Active
LM358AMX/NOPB	Texas Instruments	8-SOIC	—	1000	45	2	1000	40	3	32	0 to 70	Active
LM358M/NOPB	Texas Instruments	8-SOIC	—	1000	45	2	1000	40	3	32	0 to 70	Active
LM358MX/NOPB	Texas Instruments	8-SOIC	—	1000	45	2	1000	40	3	32	0 to 70	Active
BA10358F-E1	Rohm Semiconductor	8-SOP	0.2	500	45	2	700	20	3	32	-40 to 85	Active
BA10358F-E2	Rohm Semiconductor	8-SOP	0.2	500	45	2	700	20	3	32	-40 to 85	Active
BA2904F-E2	Rohm Semiconductor	8-SOP	0.2	500	20	2	500	30	3	32	-40 to 125	Active
BA2904SF-E2	Rohm Semiconductor	8-SOP	0.2	500	20	2	500	30	3	32	-40 to 105	Active
LM258DR2G	onsemi	8-SOIC	—	1000	45	2	800	40	3	32	-25 to 85	Active
LM2904DR	Rohm Semiconductor	8-SOIC	0.3	700	20	3	1000	40	3	26	-40 to 125	Not For New Designs

Engineering Selection Recommendations

For Active Production Applications:

The Texas Instruments LM358 series (LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, LM358MX/NOPB) represents the primary substitution path for the obsolete LM358D. These parts maintain identical 8-SOIC packaging, dual-channel configuration, and surface mount compatibility. All variants are classified as Active products with ROHS3 compliance and MSL Level 1 rating, ensuring long-term availability and regulatory compliance. The LM358 series demonstrates improved gain-bandwidth product (1 MHz versus 700 kHz) and lower input offset voltage (2 mV versus 3 mV), providing enhanced performance characteristics within the same package footprint.

For Extended Temperature Range Requirements:

The onsemi LM258DR2G and Rohm Semiconductor BA2904F-E2 / BA2904SF-E2 series provide extended operating temperature ranges (-25°C to 85°C and -40°C to 125°C respectively) while maintaining dual-channel general-purpose amplifier functionality. These alternatives are suitable for applications requiring operation beyond the LM358D's 0°C to 70°C specification. Both maintain ROHS3 compliance and MSL Level 1 rating.

For Supply Voltage Compatibility:

All recommended substitute parts operate within a minimum 3V supply voltage. The LM358 series and LM258DR2G support maximum supply voltages of 32V, exceeding the LM358D's 30V maximum. The LM2904DR supports a maximum of 26V, which is below the LM358D specification and requires verification for applications utilizing the full 30V supply range.

Compliance and Certification:

All substitute parts listed maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols. REACH status is unaffected for all alternatives.

Frequently Asked Questions (FAQ)

Q1: Can the LM358AM/NOPB directly replace the LM358D in existing designs?

A: Yes. Both parts share the identical 8-SOIC package footprint (0.154", 3.90mm width), dual-channel configuration, and surface mount mounting type. The LM358AM/NOPB operates within the required 3V to 32V supply range and maintains the 40 mA output current per channel specification. The LM358AM/NOPB is classified as Active, ensuring continued availability. Pin-for-pin compatibility is maintained.

Q2: What are the key electrical differences between the LM358D and LM358AM/NOPB?

A: The LM358AM/NOPB provides a higher gain-bandwidth product (1 MHz versus 700 kHz), lower input offset voltage (2 mV versus 3 mV), and higher supply current consumption (1 mA versus 500 µA per channel). These differences represent improved performance characteristics. The LM358AM/NOPB supports a maximum supply voltage of 32V compared to the LM358D's 30V.

Q3: Are the Rohm Semiconductor BA10358F-E2 and BA2904F-E2 suitable substitutes?

A: The BA10358F-E2 and BA2904F-E2 provide equivalent dual-channel general-purpose amplifier functionality with 8-SOP packaging. However, the package width differs (0.173", 4.40mm versus 0.154", 3.90mm), requiring PCB layout verification. The BA10358F-E2 provides lower output current per channel (20 mA versus 40 mA). The BA2904F-E2 matches the input bias current (20 nA) and supply current (500 µA) of the LM358D but provides only 30 mA output current per channel.

Q4: What is the significance of the "Not For New Designs" status of the LM2904DR?

A: The LM2904DR is classified as "Not For New Designs," indicating that while the part remains available, it is not recommended for new product development. This status suggests potential future discontinuation. For new designs, the Active-status LM358 series or LM258DR2G are preferred alternatives.

Q5: Does the LM258DR2G provide equivalent performance to the LM358D?

A: The LM258DR2G maintains the identical 8-SOIC package footprint and dual-channel configuration. It provides a higher gain-bandwidth product (1 MHz versus 700 kHz) and equivalent 40 mA output current per channel. The operating temperature range is -25°C to 85°C, which exceeds the LM358D's 0°C to 70°C specification. The LM258DR2G is classified as Active with ROHS3 compliance.

Q6: What packaging considerations apply when selecting substitutes?

A: The LM358D utilizes an 8-SOIC package with 0.154" (3.90mm) width. Direct substitutes within the Texas Instruments LM358 series and onsemi LM258DR2G maintain this identical package specification. Rohm Semiconductor alternatives (BA10358F-E2, BA2904F-E2, BA2904SF-E2) utilize 8-SOP packaging with 0.173" (4.40mm) width, requiring PCB layout verification for pin-to-pin compatibility and potential footprint adjustments.

Q7: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed in this reference maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing protocols and regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message