LM258ADRE4 Equivalent & Substitute Parts

Part Overview

The LM258ADRE4 is a general-purpose operational amplifier featuring two independent circuits in an 8-SOIC surface mount package, manufactured by Texas Instruments. This device is classified as obsolete, though 801 pieces remain in new original stock. The LM258ADRE4 operates across a wide supply voltage range of 3V to 32V with a slew rate of 0.3V/µs and a gain bandwidth product of 700 kHz, making it suitable for general-purpose amplification applications requiring low input bias current and moderate bandwidth.

Due to its obsolete status, identifying equivalent and substitute parts is essential for design continuity, long-term component availability, and production planning. Active alternatives with comparable or enhanced electrical characteristics are available from multiple manufacturers.

Key Parameters

Parameter	LM258ADRE4 Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Slew Rate	0.3	V/µs
Gain Bandwidth Product	700	kHz
Current - Input Bias	15	nA
Voltage - Input Offset	2	mV
Current - Supply (per channel)	500	µA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	3	V
Voltage - Supply Span (Max)	32	V
Operating Temperature Range	-25 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Product Status	Obsolete	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the LM258ADRE4 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Package Compatibility: 8-SOIC surface mount package (0.154", 3.90mm width) or equivalent 8-pin SOIC variants
Circuit Count: Dual-channel (2 circuits) operational amplifier configuration
Supply Voltage Range: Minimum 3V, maximum 32V or higher
Output Current Capability: Minimum 40 mA per channel
Input Bias Current: 15 nA to 45 nA acceptable range
Input Offset Voltage: 2 mV or lower
Slew Rate: 0.3V/µs or higher
Gain Bandwidth Product: 700 kHz or higher

Secondary Considerations:

Product status (active preferred over obsolete)
Operating temperature range coverage
RoHS3 compliance and REACH status
Moisture sensitivity level

Substitutes are grouped into two categories: Direct Equivalents (LM258 series variants from Texas Instruments and STMicroelectronics) and Functional Alternatives (AP4310 from Diodes Incorporated and BA10358/BA2904 from Rohm Semiconductor).

Parameter Comparison

Part Number	Manufacturer	Slew Rate (V/µs)	GBW (kHz)	Input Bias (nA)	Input Offset (mV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Status	Package
LM258ADRE4	Texas Instruments	0.3	700	15	2	500	40	3	32	-25 to 85	Obsolete	8-SOIC
LM258ADR	Texas Instruments	0.3	700	15	2	500	40	3	32	-25 to 85	Active	8-SOIC
LM358AM/NOPB	Texas Instruments	—	1000	45	2	1000	40	3	32	0 to 70	Active	8-SOIC
LM358AMX/NOPB	Texas Instruments	—	1000	45	2	1000	40	3	32	0 to 70	Active	8-SOIC
LM358M/NOPB	Texas Instruments	—	1000	45	2	1000	40	3	32	0 to 70	Active	8-SOIC
LM358MX/NOPB	Texas Instruments	—	1000	45	2	1000	40	3	32	0 to 70	Active	8-SOIC
AP4310AMTR-G1	Diodes Incorporated	0.5	1000	20	0.5	150	40	3	36	-40 to 105	Active	8-SOIC
BA10358F-E1	Rohm Semiconductor	0.2	500	45	2	700	20	3	32	-40 to 85	Active	8-SOIC
BA10358F-E2	Rohm Semiconductor	0.2	500	45	2	700	20	3	32	-40 to 85	Active	8-SOIC
BA2904F-E2	Rohm Semiconductor	0.2	500	20	2	500	30	3	32	-40 to 125	Active	8-SOIC
LM258ADT	STMicroelectronics	0.6	1100	20	1	700	40	3	30	-40 to 105	Active	8-SOIC

Engineering Selection Recommendations

Tier 1 - Direct Replacement (Highest Compatibility):

The LM258ADR from Texas Instruments is the direct active equivalent of the LM258ADRE4. It maintains identical electrical specifications including 0.3V/µs slew rate, 700 kHz gain bandwidth product, 15 nA input bias current, and 500 µA supply current per channel. The LM258ADR is available in active status with 27,600 pieces in stock, ensuring long-term availability. Both parts share the same 8-SOIC package footprint and are ROHS3 compliant. This substitution requires no circuit redesign or validation.

Tier 2 - Enhanced Performance Alternatives (Active Status, Improved Specifications):

The LM258ADT from STMicroelectronics provides enhanced performance with higher slew rate (0.6V/µs), improved gain bandwidth product (1.1 MHz), lower input offset voltage (1 mV), and extended temperature range (-40°C to 105°C). It carries AEC-Q100 automotive qualification and is available in active status with 60,400 pieces in stock. The supply voltage maximum is reduced to 30V, which remains compatible with most applications requiring the original 32V maximum.

The LM358 series (LM358AM/NOPB, LM358AMX/NOPB, LM358M/NOPB, LM358MX/NOPB) from Texas Instruments offers higher gain bandwidth product (1 MHz) and improved input bias current specification (45 nA maximum). These parts operate within the 3V to 32V supply range and maintain 40 mA output current capability. Operating temperature range is limited to 0°C to 70°C, which may restrict use in extended temperature applications. All variants are in active status with substantial inventory.

Tier 3 - Functional Alternatives (Different Manufacturers, Comparable Performance):

The AP4310AMTR-G1 from Diodes Incorporated provides superior performance characteristics including 0.5V/µs slew rate, 1 MHz gain bandwidth product, 20 nA input bias current, and 0.5 mV input offset voltage. Supply voltage range extends to 36V maximum. Operating temperature range is -40°C to 105°C. This part is available in active status with 888,300 pieces in stock, providing exceptional availability. Moisture sensitivity level is MSL 3 (168 hours), compared to MSL 1 for the original part.

The BA10358F-E1 and BA10358F-E2 from Rohm Semiconductor maintain the 3V to 32V supply range and 2 mV input offset voltage. However, slew rate is reduced to 0.2V/µs and gain bandwidth product is 500 kHz, both lower than the original specification. Output current per channel is limited to 20 mA, which may be insufficient for applications requiring the full 40 mA capability of the LM258ADRE4.

The BA2904F-E2 from Rohm Semiconductor offers extended operating temperature range (-40°C to 125°C) and maintains 500 µA supply current per channel. However, output current is limited to 30 mA per channel, and slew rate and gain bandwidth product are reduced compared to the original part.

Selection Criteria by Application:

Direct replacement with no redesign: LM258ADR
Automotive or extended temperature applications: LM258ADT
Higher bandwidth or improved offset voltage: LM358 series or AP4310AMTR-G1
Maximum availability and inventory: AP4310AMTR-G1
Cost-optimized alternatives: BA10358F-E2 or BA2904F-E2 (with output current limitations noted)

All recommended substitutes are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Frequently Asked Questions (FAQ)

Q1: Can I directly replace LM258ADRE4 with LM258ADR without circuit modifications?

A: Yes. The LM258ADR is the active equivalent of the LM258ADRE4 with identical electrical specifications. Both parts feature 0.3V/µs slew rate, 700 kHz gain bandwidth product, 15 nA input bias current, and 500 µA supply current per channel. The 8-SOIC package footprint is identical. No circuit redesign or PCB layout changes are required.

Q2: What is the primary difference between LM258 and LM358 series operational amplifiers?

A: The LM358 series offers higher gain bandwidth product (1 MHz versus 700 kHz) and operates at higher supply current (1 mA versus 500 µA per channel). The LM358 series has a narrower operating temperature range (0°C to 70°C versus -25°C to 85°C for LM258ADRE4). Both maintain the same 3V to 32V supply voltage range and 40 mA output current capability. The LM358 is suitable for applications requiring higher bandwidth; the LM258 is preferred for lower power consumption applications.

Q3: Is the AP4310AMTR-G1 a suitable replacement for the LM258ADRE4?

A: The AP4310AMTR-G1 from Diodes Incorporated is functionally compatible and offers superior electrical performance including higher slew rate (0.5V/µs), higher gain bandwidth product (1 MHz), lower input offset voltage (0.5 mV), and extended operating temperature range (-40°C to 105°C). Supply voltage range extends to 36V. The primary consideration is moisture sensitivity level (MSL 3 versus MSL 1 for the original part), which may affect storage and handling requirements. This part is suitable for applications where improved performance is beneficial.

Q4: Why do some substitute parts have lower output current specifications?

A: The BA10358F-E1, BA10358F-E2, and BA2904F-E2 from Rohm Semiconductor are designed for different application requirements. Output current of 20 mA to 30 mA per channel is sufficient for many general-purpose amplification circuits, signal conditioning, and instrumentation applications. Applications requiring the full 40 mA output current capability of the LM258ADRE4 must use substitutes that maintain this specification: LM258ADR, LM258ADT, LM358 series, or AP4310AMTR-G1.

Q5: What is the significance of the operating temperature range difference?

A: The LM258ADRE4 operates from -25°C to 85°C. The LM358 series operates from 0°C to 70°C, which is narrower. The LM258ADT, AP4310AMTR-G1, and Rohm parts extend to -40°C or lower and 105°C or higher. Temperature range selection depends on the application environment. Industrial and automotive applications typically require -40°C to 105°C or wider ranges. Consumer applications may operate within 0°C to 70°C. Extended temperature range parts provide design flexibility for future applications.

Q6: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed (LM258ADR, LM358 series, LM258ADT, AP4310AMTR-G1, BA10358F-E1, BA10358F-E2, BA2904F-E2) are ROHS3 compliant and REACH unaffected. They meet current environmental and regulatory requirements for electronic component manufacturing and use.

Q7: What packaging options are available for these substitutes?

A: All substitutes are available in 8-SOIC surface mount package with 0.154" (3.90mm) width, matching the original LM258ADRE4 package. Some variants are available in different tape and reel configurations (Cut Tape & Digi-Reel or Tube packaging), which affects ordering and handling but does not change the component itself. Verify packaging format with your supplier to ensure compatibility with your assembly process.

Q8: Which substitute offers the best combination of performance and availability?

A: The AP4310AMTR-G1 from Diodes Incorporated provides superior electrical performance (0.5V/µs slew rate, 1 MHz gain bandwidth product, 0.5 mV input offset voltage) combined with exceptional inventory availability (888,300 pieces in stock). For applications where the original specifications are sufficient and cost is a primary consideration, the LM258ADR offers direct equivalence with 27,600 pieces available. For automotive applications, the LM258ADT provides AEC-Q100 qualification with 60,400 pieces in stock.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message