LGJ2C181MELY Equivalent & Substitute Parts

Part Overview

The LGJ2C181MELY is a 180 µF, 160 V aluminum electrolytic capacitor manufactured by Nichicon in the LGJ series. This radial, can-style snap-in capacitor is designed for general-purpose applications with a rated lifetime of 3000 hours at 105°C and an operating temperature range of -40°C to 105°C. The part is currently active in production status. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, design upgrades, or application-specific voltage margin requirements.

Substiute Parts

LGJ2C181MELY

NichiconIn Stock: 794LGJ2C181MELY Datasheet

Current PartRFQ

LGJ2D181MELY20

NichiconIn Stock: 1589LGJ2D181MELY20 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The LGJ2D181MELY20 is identified as a direct substitute for the LGJ2C181MELY based on the following substitution criteria:

Electrical Compatibility:

• Identical capacitance value: 180 µF
• Identical tolerance: ±20%
• Identical ripple current specifications at both 120 Hz and 50 kHz
• Identical lifetime rating: 3000 Hrs @ 105°C
• Identical operating temperature range: -40°C ~ 105°C
• Identical polarization: Polar

Mechanical Compatibility:

• Identical package type: Radial, Can - Snap-In
• Identical mounting type: Through Hole
• Identical lead spacing: 0.394" (10.00mm)
• Identical physical dimensions: 0.787" Dia (20.00mm), Height 0.866" (22.00mm)

Voltage Upgrade:

• Rated voltage: 200 V (versus 160 V in main part)
• The higher voltage rating provides additional design margin while maintaining all other electrical and mechanical specifications

Compliance:

• Both parts are ROHS3 Compliant
• Both parts are REACH Unaffected
• Both parts carry ECCN: EAR99 classification

Parameter Comparison

Engineering Selection Recommendations

Both the LGJ2C181MELY and LGJ2D181MELY20 are active production parts from Nichicon with full ROHS3 compliance and REACH unaffected status. The LGJ2D181MELY20 functions as a direct electrical and mechanical substitute with the distinction of a higher rated voltage (200 V versus 160 V). This voltage upgrade maintains all other specifications while providing additional voltage margin in the circuit design. Selection between these parts depends on circuit voltage requirements and application design specifications. Both parts are suitable for general-purpose applications within their respective voltage ratings.

Frequently Asked Questions (FAQ)

Q: Can the LGJ2D181MELY20 replace the LGJ2C181MELY in any application?

A: The LGJ2D181MELY20 is electrically and mechanically compatible with the LGJ2C181MELY. The 200 V rating of the substitute part is suitable for circuits designed for 160 V operation, as it provides additional voltage margin. Verify that your circuit design does not have specific voltage rating constraints that would exclude the higher-rated part.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical mechanical specifications: 0.787" diameter, 0.866" maximum seated height, 0.394" lead spacing, and radial snap-in package configuration. They are mechanically interchangeable on PCBs designed for either part.

Q: Do both parts have the same ripple current ratings?

A: Yes. Both the LGJ2C181MELY and LGJ2D181MELY20 have identical ripple current specifications: 680 mA at 120 Hz and 1.02 A at 50 kHz.

Q: What is the difference between these two parts?

A: The primary difference is the rated voltage: LGJ2C181MELY is rated at 160 V, while LGJ2D181MELY20 is rated at 200 V. All other electrical parameters, mechanical dimensions, and compliance certifications are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the LGJ2C181MELY and LGJ2D181MELY20 are ROHS3 compliant and REACH unaffected.