LGC24Z225MAT2S1 Equivalent & Substitute Parts

Part Overview

The LGC24Z225MAT2S1 is a 2.2 µF ceramic capacitor rated at 4V with X7S temperature coefficient in 0805 (2012 Metric) surface mount package, manufactured by KYOCERA AVX. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design support and procurement. The part serves bypass and decoupling applications in electronic circuits requiring stable capacitance across the -55°C to 125°C operating temperature range.

Substiute Parts

LGC24Z225MAT2S1

KYOCERA AVXIn Stock: 805LGC24Z225MAT2S1 Datasheet

Current PartRFQ

CLLE1AX7S0G225M/0.55

TDK CorporationIn Stock: 758CLLE1AX7S0G225M/0.55 Datasheet

DirectRFQ

LLA219C70G225MA01L

Murata ElectronicsIn Stock: 53161LLA219C70G225MA01L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the LGC24Z225MAT2S1 is determined by strict equivalence across the following electrical and mechanical parameters:

• Capacitance value: 2.2 µF
• Tolerance: ±20%
• Voltage rating: 4V (minimum)
• Temperature coefficient: X7S
• Operating temperature range: -55°C to 125°C
• Package: 0805 (2012 Metric)
• Mounting type: Surface Mount, MLCC
• Moisture sensitivity: MSL 1

Two active substitute parts meet these criteria and are qualified for direct replacement in bypass and decoupling applications.

Parameter Comparison

Engineering Selection Recommendations

CLLE1AX7S0G225M/0.55 (TDK Corporation) is the primary substitute for the obsolete LGC24Z225MAT2S1. This part maintains active product status and meets all electrical and mechanical specifications. The TDK part exhibits identical thickness (0.55mm) to the original component, ensuring compatibility with existing PCB layouts and assembly processes. RoHS3 compliance is confirmed.

LLA219C70G225MA01L (Murata Electronics) is a secondary substitute classified as Last Time Buy. This part satisfies all core electrical parameters but features increased thickness (0.95mm) compared to the original specification (0.55mm). This dimensional difference may require PCB layout verification for applications with height constraints. RoHS3 compliance is confirmed.

Both substitute parts carry REACH Unaffected and EAR99 classifications, matching the regulatory profile of the original component.

Frequently Asked Questions (FAQ)

Q: Can CLLE1AX7S0G225M/0.55 and LLA219C70G225MA01L be used interchangeably with LGC24Z225MAT2S1?

A: Both parts meet the core electrical specifications (2.2 µF, ±20%, 4V, X7S, -55°C to 125°C). However, dimensional differences exist. CLLE1AX7S0G225M/0.55 maintains the original 0.55mm thickness, while LLA219C70G225MA01L is 0.95mm thick. PCB layout verification is required for the Murata part if height clearance is constrained.

Q: What is the primary difference between the two substitute parts?

A: The TDK part (CLLE1AX7S0G225M/0.55) is in Active status with matching thickness to the original. The Murata part (LLA219C70G225MA01L) is Last Time Buy status with increased thickness. Both are electrically equivalent for bypass and decoupling applications.

Q: Are both substitutes RoHS compliant?

A: Yes. CLLE1AX7S0G225M/0.55 and LLA219C70G225MA01L are both RoHS3 compliant. The original LGC24Z225MAT2S1 does not specify RoHS status.

Q: Which substitute should be selected for new designs?

A: CLLE1AX7S0G225M/0.55 is recommended for new designs due to Active product status and dimensional compatibility with the original specification.

Q: Are there any regulatory or export restrictions on these parts?

A: All three parts (original and substitutes) carry EAR99 classification and REACH Unaffected status, indicating no additional regulatory restrictions for standard commercial applications.