LEDS2M-450-01 Equivalent & Substitute Parts

Part Overview

The LEDS2M-450-01 is a T1 3/4 LED spacer manufactured by Essentra Components (Richco series). This molded nylon standoff measures 0.450" (11.43mm) in length and is designed for T1 3/4 LED component mounting applications. The part is currently active in production with 857 pieces in stock. Equivalent and substitute parts become necessary when primary inventory is depleted, when alternative sourcing is required for supply chain continuity, or when design specifications allow for minor dimensional variations within acceptable tolerances.

Substiute Parts

LEDS2M-450-01

Essentra ComponentsIn Stock: 962LEDS2M-450-01 Datasheet

Current PartRFQ

LEDS2M-440-01

Essentra ComponentsIn Stock: 1796LEDS2M-440-01 Datasheet

Parametric EquivalentRFQ

8329

Keystone ElectronicsIn Stock: 57528329 Datasheet

Parametric EquivalentRFQ

8330

Keystone ElectronicsIn Stock: 32118330 Datasheet

Parametric EquivalentRFQ

8331

Keystone ElectronicsIn Stock: 7828331 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LEDS2M-450-01 is determined by the following critical parameters: LED type (T1 3/4), material (nylon), color (natural), and length tolerance. The substitute parts listed below maintain compatibility through these core specifications.

Length-Based Grouping:

• Exact Match (0.450"): Part 8330 (Keystone Electronics) provides direct dimensional equivalence
• Near-Match (0.440"): Parts LEDS2M-440-01 (Essentra Components) and 8329 (Keystone Electronics) represent a 0.010" reduction in length
• Extended Length (0.460"): Part 8331 (Keystone Electronics) represents a 0.010" increase in length

All substitute parts maintain the T1 3/4 LED type, natural nylon construction, and bulk packaging format of the primary part.

Parameter Comparison

Engineering Selection Recommendations

Primary Equivalent: Part 8330 (Keystone Electronics) is the direct dimensional equivalent to LEDS2M-450-01, maintaining identical 0.450" length specifications while meeting ROHS3 compliance standards.

Secondary Equivalents: Parts LEDS2M-440-01 and 8329 provide 0.010" shorter alternatives suitable for applications where reduced standoff height is acceptable. Both maintain full RoHS compliance and nylon construction.

Extended Length Alternative: Part 8331 offers a 0.010" longer standoff option for applications requiring increased component clearance, with ROHS3 compliance certification.

All substitute parts are active production items with confirmed inventory availability and maintain compatibility with T1 3/4 LED mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can LEDS2M-440-01 be used as a direct replacement for LEDS2M-450-01? A: LEDS2M-440-01 is a parametric equivalent with a 0.010" shorter length (0.440" vs. 0.450"). Substitution is valid only if application design tolerances permit this dimensional variation.

Q: What is the difference between Essentra Components and Keystone Electronics parts? A: Both manufacturers produce T1 3/4 LED spacers in natural nylon with equivalent functional specifications. Keystone Electronics parts carry ROHS3 certification, while Essentra Components parts carry RoHS Compliant certification. Material composition and performance characteristics remain consistent across manufacturers.

Q: Are all substitute parts available in bulk packaging? A: Yes. All listed substitute parts are supplied in bulk packaging format, consistent with the primary LEDS2M-450-01 specification.

Q: Which substitute part has the highest inventory availability? A: Part 8329 (Keystone Electronics, 0.440" length) has the highest inventory at 5,732 pieces in stock.

Q: Can parts with different lengths be interchanged within the same assembly? A: Length variations of ±0.010" exist among substitute parts. Interchangeability depends on specific application clearance requirements and mechanical design constraints. Design verification is necessary when substituting parts with different length specifications.