LEDS2M-400-01 Equivalent & Substitute Parts

Part Overview

The LEDS2M-400-01 is a T1 3/4 LED spacer manufactured by Essentra Components. This molded nylon standoff is designed for 0.400" (10.16mm) LED applications and maintains an active product status. LED spacers are essential components in electronic assemblies where precise positioning and isolation of LED leads are required. Identifying equivalent parts ensures design flexibility and supply chain continuity when the primary part becomes unavailable or when alternative sourcing is needed.

Substiute Parts

LEDS2M-400-01

Essentra ComponentsIn Stock: 945LEDS2M-400-01 Datasheet

Current PartRFQ

8327

Keystone ElectronicsIn Stock: 118078327 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the LEDS2M-400-01 is determined by matching the following critical parameters:

• LED Type: T1 3/4 form factor
• Length: 0.400" (10.16mm)
• Material: Nylon construction
• Color: Natural finish

The Keystone Electronics part 8327 meets all these criteria, establishing it as a parametric equivalent. Both parts are manufactured from nylon, accommodate T1 3/4 LED leads, and provide identical 0.400" standoff height. Compliance certifications (RoHS and REACH) are maintained across both parts, confirming suitability for equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

Both the LEDS2M-400-01 and 8327 are active products with full regulatory compliance. The LEDS2M-400-01 carries RoHS Compliant certification, while the 8327 carries ROHS3 Compliant certification. Both parts maintain REACH Unaffected status. Selection between these parts should be based on availability, lead time, and procurement requirements, as the parametric specifications are equivalent. The 8327 offers higher current inventory availability (11,753 pcs vs. 926 pcs), which may influence sourcing decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can the Keystone Electronics 8327 be used as a direct replacement for the LEDS2M-400-01?

A: Yes. Both parts share identical LED type (T1 3/4), length (0.400"), material (nylon), and color (natural). Mechanical and electrical compatibility is established through these matching parameters.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS and REACH compliant. The LEDS2M-400-01 carries RoHS Compliant certification, while the 8327 carries ROHS3 Compliant certification. Both certifications satisfy regulatory requirements for equivalent applications.

Q: What is the Moisture Sensitivity Level (MSL) difference?

A: The LEDS2M-400-01 lists MSL as Not Applicable, while the 8327 lists MSL 1 (Unlimited). This difference does not affect substitution suitability for LED spacer applications, as moisture sensitivity is not a critical parameter for this component category.

Q: Are packaging formats identical?

A: Both parts are supplied in Bulk packaging, suitable for standard component handling and assembly processes.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on supplier availability, lead time, and cost considerations, as parametric specifications are equivalent.