LEDS2M-280-01 Equivalent & Substitute Parts

Part Overview

The LEDS2M-280-01 is a T1 3/4 LED spacer manufactured by Essentra Components. This molded nylon standoff is designed for 0.280" (7.11mm) LED applications and is currently in active production status. Finding equivalent substitute parts is necessary to ensure supply chain flexibility, optimize procurement costs, and maintain design continuity when the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

LEDS2M-280-01

Essentra ComponentsIn Stock: 1638LEDS2M-280-01 Datasheet

Current PartRFQ

8320

Keystone ElectronicsIn Stock: 285958320 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDS2M-280-01 are qualified based on the following critical parameters:

• LED Type: T1 3/4 form factor compatibility
• Length: 0.280" (7.11mm) dimensional specification
• Material: Nylon construction
• Color: Natural finish
• RoHS Compliance: Regulatory requirement for electronic component applications
• Moisture Sensitivity Level: MSL 1 rating for storage and handling conditions
• REACH Status: Environmental compliance requirement

Parts meeting all these parameters are considered direct parametric equivalents and can be substituted without design modification.

Parameter Comparison

Engineering Selection Recommendations

Both the LEDS2M-280-01 and the Keystone Electronics 8320 meet identical electrical and mechanical specifications for T1 3/4 LED spacer applications at 0.280" length. Both parts maintain active production status and comply with RoHS and REACH requirements. The 8320 substitute part is qualified for direct replacement in applications where the LEDS2M-280-01 is specified, provided that the design does not include manufacturer-specific mechanical tolerances or assembly requirements beyond the stated parameters.

Frequently Asked Questions (FAQ)

Q: Can the Keystone Electronics 8320 be used as a direct replacement for LEDS2M-280-01?

A: Yes. Both parts share identical specifications for LED type (T1 3/4), length (0.280"), material (nylon), color (natural), and regulatory compliance (RoHS, REACH). They are parametric equivalents.

Q: Are there any differences in packaging between these parts?

A: Both parts are supplied in bulk packaging. Packaging format differences do not affect functional compatibility.

Q: What is the significance of MSL 1 rating for these parts?

A: MSL 1 indicates unlimited shelf life under standard storage conditions. No special moisture control measures are required during storage or handling.

Q: Can these spacers be used interchangeably in existing PCB designs?

A: Yes, provided the design references only the specified parameters (LED type, length, material, and color). No design modification is necessary for substitution.

Q: Are there any compliance considerations when switching between these manufacturers?

A: Both parts maintain equivalent RoHS and REACH compliance status. No additional compliance review is required for substitution.