LEDS1E-14-01 Equivalent & Substitute Parts

Part Overview

The LEDS1E-14-01 is a T1 LED standoff spacer manufactured by Essentra Components from black PVC material with a length of 0.875" (22.22mm). This component is designed to provide mechanical spacing and support for T1-sized LED assemblies in electronic applications. The part maintains Active product status and is RoHS Compliant, making it suitable for current production environments. Equivalent substitute parts may be required due to inventory availability, supply chain considerations, or specific packaging requirements while maintaining identical functional performance.

Substiute Parts

LEDS1E-14-01

Essentra ComponentsIn Stock: 934LEDS1E-14-01 Datasheet

Current PartRFQ

LEDS1-14-26

Essentra ComponentsIn Stock: 3402LEDS1-14-26 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The LEDS1E-14-01 has one identified parametric equivalent: LEDS1-14-26. Substitution eligibility is determined by the following critical parameters:

• LED Type: Both parts are T1 specification
• Material: Both are black PVC construction
• Color: Both are black
• Length: 0.875" (22.22mm) primary specification with 0.874" (22.20mm) as equivalent tolerance
• RoHS Compliance: Both parts maintain RoHS Compliant status
• Product Status: Both parts are Active

The LEDS1-14-26 represents a functionally equivalent alternative within the Richco LEDS1 series base product family, differing only in series designation (LEDS1 versus LEDS1E) while maintaining all critical mechanical and material specifications.

Parameter Comparison

Engineering Selection Recommendations

Both LEDS1E-14-01 and LEDS1-14-26 are Active products with full RoHS Compliance and REACH Unaffected status, qualifying them for equivalent use in production applications. The dimensional variance of 0.02mm (0.875" versus 0.874") falls within standard manufacturing tolerances for PVC spacer components and does not affect functional performance in T1 LED standoff applications. Selection between these parts may be based on inventory availability, packaging requirements, or supply chain logistics without compromising compliance or mechanical function.

Frequently Asked Questions (FAQ)

Q: Can LEDS1-14-26 be used as a direct replacement for LEDS1E-14-01?

A: Yes. Both parts are T1 LED standoffs manufactured from black PVC with equivalent material specifications, RoHS Compliance, and Active product status. The 0.02mm length difference is within standard manufacturing tolerance for this component category.

Q: What is the difference between the LEDS1E and LEDS1 series designations?

A: Both parts share the same LEDS1 base product number. The series designation difference does not affect mechanical or electrical performance; both are functionally equivalent T1 LED spacers.

Q: Are both parts suitable for RoHS-compliant applications?

A: Yes. Both LEDS1E-14-01 and LEDS1-14-26 are RoHS Compliant and REACH Unaffected, meeting regulatory requirements for current production environments.

Q: What packaging format is available for these parts?

A: Both parts are supplied in Bulk packaging format.

Q: Are there any moisture sensitivity considerations for these parts?

A: LEDS1E-14-01 lists Moisture Sensitivity Level as Not Applicable. LEDS1-14-26 specifies MSL 1 (Unlimited). Both designations indicate no moisture-related handling restrictions for PVC spacer components.