LEDM-3-22 LED Spacer Equivalent & Substitute Parts

Part Overview

The LEDM-3-22 is a T1 3/4 LED standoff spacer manufactured by Essentra Components. This component is a black PVC spacer measuring 0.866" (22.00mm) in length, designed for T1 3/4 LED applications. The part is currently active in production status and maintains full RoHS compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where dimensional tolerance and material properties remain within acceptable ranges.

Substiute Parts

LEDM-3-22

Essentra ComponentsIn Stock: 983LEDM-3-22 Datasheet

Current PartRFQ

LEDM-1-21

Essentra ComponentsIn Stock: 1869LEDM-1-21 Datasheet

Parametric EquivalentRFQ

LEDM-3-21

Essentra ComponentsIn Stock: 2260LEDM-3-21 Datasheet

Parametric EquivalentRFQ

LEDS2-14-26

Essentra ComponentsIn Stock: 1806LEDS2-14-26 Datasheet

Parametric EquivalentRFQ

ELM 1-875

Bivar Inc.In Stock: 20461ELM 1-875 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDM-3-22 are qualified based on the following parameters:

• LED Type: All substitutes must support T1 3/4 LED form factor
• Material: All substitutes must be PVC construction
• Color: All substitutes must be black
• Length Tolerance: Substitutes are grouped by length variation within manufacturing tolerance ranges
• RoHS Compliance: All substitutes must maintain RoHS compliance status
• Moisture Sensitivity Level: All substitutes must maintain MSL 1 rating

The LEDM-3-22 substitutes are organized into two length categories: parts with 21.00mm length (LEDM-1-21, LEDM-3-21) representing a shorter variant, and parts with lengths between 22.00mm and 22.22mm (LEDS2-14-26, ELM 1-875) representing near-equivalent or slightly longer variants.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active production status and full compliance with RoHS requirements. Selection between substitutes depends on length requirements for the specific application:

Near-Equivalent Length (22.00mm ± 0.22mm): LEDS2-14-26 and ELM 1-875 provide lengths of 22.20mm and 22.22mm respectively, representing minimal deviation from the LEDM-3-22 specification. Both parts maintain equivalent material properties and compliance certifications. ELM 1-875 is available in higher inventory volume (20,420 pcs) compared to LEDS2-14-26 (1,715 pcs).

Shorter Length (21.00mm): LEDM-1-21 and LEDM-3-21 both provide 21.00mm length, representing a 1.00mm reduction from the original specification. These parts are suitable only when application design accommodates the reduced standoff height. LEDM-3-21 offers higher inventory availability (2,213 pcs) versus LEDM-1-21 (1,766 pcs).

All substitutes are manufactured from identical PVC material with matching black color and T1 3/4 LED compatibility. Moisture sensitivity and RoHS compliance remain consistent across all options.

Frequently Asked Questions (FAQ)

Q: Can LEDM-1-21 or LEDM-3-21 be used as direct replacements for LEDM-3-22?

A: LEDM-1-21 and LEDM-3-21 are parametric equivalents with identical material, color, and LED type specifications. However, these parts feature 21.00mm length compared to the LEDM-3-22 at 22.00mm. Direct substitution is valid only when application design tolerates a 1.00mm reduction in standoff height.

Q: What is the length difference between LEDS2-14-26 and the original LEDM-3-22?

A: LEDS2-14-26 measures 22.20mm in length versus LEDM-3-22 at 22.00mm, representing a 0.20mm increase. This minimal dimensional variance typically falls within standard mechanical tolerances for LED spacer applications.

Q: Are ELM 1-875 and LEDM-3-22 fully interchangeable?

A: ELM 1-875 is manufactured by Bivar Inc. and measures 22.22mm in length, compared to LEDM-3-22 at 22.00mm. The 0.22mm length difference is negligible for most applications. Both parts share identical material (PVC), color (black), LED type (T1 3/4), and MSL rating (1). RoHS compliance is maintained by both parts, with ELM 1-875 certified to ROHS3 standard.

Q: What inventory considerations apply when selecting a substitute?

A: Current inventory levels vary significantly across substitute options. ELM 1-875 maintains the highest stock level at 20,420 pcs. LEDM-3-21 provides 2,213 pcs, LEDS2-14-26 offers 1,715 pcs, and LEDM-1-21 has 1,766 pcs available. Original LEDM-3-22 inventory is 945 pcs.

Q: Do all substitute parts maintain the same moisture sensitivity rating?

A: All identified substitutes maintain MSL 1 (Unlimited) rating, identical to the LEDM-3-22 specification. This ensures equivalent performance in moisture-sensitive environments and storage conditions.