LEDM-2-23 LED Spacer Equivalent & Substitute Parts

Part Overview

The LEDM-2-23 is a T1 LED standoff spacer manufactured by Essentra Components, designed for T1 LED applications requiring a 0.906" (23.00mm) black PVC spacer. This component is currently active in production and RoHS compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in assembly applications.

Substiute Parts

LEDM-2-23

Essentra ComponentsIn Stock: 826LEDM-2-23 Datasheet

Current PartRFQ

LEDS1-14-26

Essentra ComponentsIn Stock: 3402LEDS1-14-26 Datasheet

Parametric EquivalentRFQ

LEDS1E-14-01

Essentra ComponentsIn Stock: 934LEDS1E-14-01 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDM-2-23 are qualified based on the following criteria:

• LED Type Match: T1 form factor compatibility
• Material Consistency: Black PVC construction
• Length Tolerance: Mechanical dimensions within acceptable assembly variance
• Compliance Alignment: RoHS compliance and REACH unaffected status
• Product Status: Active manufacturing status

The identified substitutes (LEDS1-14-26 and LEDS1E-14-01) meet these parameters with length specifications of 0.874" (22.20mm) and 0.875" (22.22mm) respectively, representing mechanical equivalence within standard assembly tolerances for T1 LED spacer applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active production status and RoHS compliance. The LEDM-2-23 operates at 23.00mm length, while LEDS1-14-26 and LEDS1E-14-01 operate at 22.20mm and 22.22mm respectively. Selection between these parts depends on assembly requirements where length tolerance is a determining factor. All parts share identical LED type (T1), color (black), and material (PVC) specifications, ensuring functional equivalence in T1 LED standoff applications. LEDS1E-14-01 carries an MSL rating of Not Applicable, while both LEDM-2-23 and LEDS1-14-26 maintain MSL 1 (Unlimited) ratings.

Frequently Asked Questions (FAQ)

Q: Can LEDS1-14-26 or LEDS1E-14-01 be used as direct replacements for LEDM-2-23?

A: Both parts qualify as parametric equivalents based on T1 LED type, black PVC material, and RoHS compliance. Length differences of approximately 0.03mm to 0.032mm exist and must be evaluated against specific assembly clearance requirements.

Q: What is the significance of the length variation between these parts?

A: The LEDM-2-23 specifies 23.00mm length, while substitutes measure 22.20mm and 22.22mm. These dimensional differences may affect PCB standoff height and component clearance. Assembly design must accommodate these tolerances.

Q: Are all three parts suitable for the same environmental conditions?

A: All parts are RoHS compliant and REACH unaffected. LEDM-2-23 and LEDS1-14-26 carry MSL 1 (Unlimited) ratings. LEDS1E-14-01 carries MSL Not Applicable. Environmental sensitivity considerations should reference the specific MSL classification for moisture-sensitive applications.

Q: What packaging formats are available?

A: LEDM-2-23 is supplied in standard packaging. Both LEDS1-14-26 and LEDS1E-14-01 are supplied in bulk packaging format.

Q: Are these parts cross-compatible within the same assembly?

A: Compatibility is determined by assembly design tolerance for T1 LED standoff height. All parts share identical LED type, color, and material specifications. Length variation must be evaluated against specific PCB and component layout requirements.