LEDM-2-22 LED Spacer Equivalent & Substitute Parts

Part Overview

The LEDM-2-22 is a T1 LED standoff spacer manufactured by Essentra Components, designed for 3mm LED applications. This black PVC spacer measures 0.866" (22.00mm) in length and is classified as an active product with full RoHS compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where dimensional and material tolerances permit.

Substiute Parts

LEDM-2-22

Essentra ComponentsIn Stock: 1129LEDM-2-22 Datasheet

Current PartRFQ

LEDM-2-21

Essentra ComponentsIn Stock: 3363LEDM-2-21 Datasheet

Parametric EquivalentRFQ

LEDS1-14-26

Essentra ComponentsIn Stock: 3402LEDS1-14-26 Datasheet

Parametric EquivalentRFQ

LEDS1E-14-01

Essentra ComponentsIn Stock: 934LEDS1E-14-01 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDM-2-22 are qualified based on the following criteria:

• LED Type: T1 (all substitutes maintain T1 compatibility)
• Material: PVC (consistent across all alternatives)
• Color: Black (uniform across all options)
• Length Tolerance: Parts within 0.827" to 0.875" (21.00mm to 22.22mm) are grouped as parametric equivalents
• Compliance: RoHS Compliant status maintained across all substitutes
• Product Status: All substitutes are Active

The LEDM-2-21 provides a shorter alternative at 0.827" (21.00mm). The LEDS1-14-26 and LEDS1E-14-01 offer lengths of 0.874" (22.20mm) and 0.875" (22.22mm) respectively, positioning them as near-equivalent alternatives to the main part's 0.866" (22.00mm) specification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status and full RoHS compliance, qualifying them for direct replacement in applications where length tolerance is acceptable. The LEDM-2-21 represents a shorter option at 0.827" (21.00mm), suitable for applications requiring reduced standoff height. The LEDS1-14-26 and LEDS1E-14-01 provide lengths of 0.874" (22.20mm) and 0.875" (22.22mm) respectively, positioning them as near-equivalent alternatives with minimal dimensional variance from the main part specification of 0.866" (22.00mm). Selection should be based on specific application height requirements and available inventory levels.

Frequently Asked Questions (FAQ)

Q: Can LEDM-2-21 be used as a direct replacement for LEDM-2-22?

A: LEDM-2-21 is a parametric equivalent with identical material, color, and LED type specifications. The primary difference is length: 0.827" (21.00mm) versus 0.866" (22.00mm). Substitution is valid where the reduced standoff height is compatible with application requirements.

Q: What is the length difference between LEDM-2-22 and LEDS1-14-26?

A: LEDM-2-22 measures 0.866" (22.00mm) while LEDS1-14-26 measures 0.874" (22.20mm), representing a difference of 0.008" (0.20mm). Both are T1 LED spacers in black PVC with RoHS compliance.

Q: Are all substitute parts RoHS compliant?

A: Yes. LEDM-2-22, LEDM-2-21, LEDS1-14-26, and LEDS1E-14-01 are all RoHS Compliant and REACH Unaffected.

Q: What packaging options are available for substitute parts?

A: LEDM-2-21, LEDS1-14-26, and LEDS1E-14-01 are supplied in Bulk packaging. The main part LEDM-2-22 is supplied with standard packaging.

Q: Which substitute part has the closest length match to LEDM-2-22?

A: LEDS1-14-26 at 0.874" (22.20mm) and LEDS1E-14-01 at 0.875" (22.22mm) provide the closest dimensional alignment to the main part's 0.866" (22.00mm) specification, with variances of 0.008" (0.20mm) and 0.009" (0.22mm) respectively.