LEDM-2-05 LED Spacer Equivalent & Substitute Parts

Part Overview

The LEDM-2-05 is a T1 LED standoff spacer manufactured by Essentra Components, designed for 3mm LED applications. This black PVC spacer measures 0.197" (5.00mm) in length and is classified as an active product with RoHS compliance. Alternative equivalent parts are available from other manufacturers to support supply chain flexibility and inventory management for this standard component category.

Substiute Parts

LEDM-2-05

Essentra ComponentsIn Stock: 1187LEDM-2-05 Datasheet

Current PartRFQ

LEDS1-3-26

Essentra ComponentsIn Stock: 2756LEDS1-3-26 Datasheet

Parametric EquivalentRFQ

ELM 2-200

Bivar Inc.In Stock: 5093ELM 2-200 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent substitutes for the LEDM-2-05 are determined by matching the following critical parameters: LED type (T1), material composition (PVC), color (black), and mechanical length tolerance. The substitute parts listed maintain these core specifications within acceptable dimensional variance for T1 LED standoff applications. Length variations of ±0.010" to ±0.020" are within standard mechanical tolerance for this component category and do not affect functional performance in typical PCB assembly applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and meet regulatory compliance requirements. The LEDM-2-05 and ELM 2-200 are dimensionally closest, with lengths of 5.00mm and 5.08mm respectively. The LEDS1-3-26 offers a slightly shorter profile at 4.80mm. Selection should be based on specific PCB assembly height requirements and available inventory. All parts carry equivalent environmental compliance certifications (RoHS and REACH), making them suitable for equivalent substitution in applications where the mechanical length tolerance is acceptable.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the LEDM-2-05? A: Substitutes must match the T1 LED type, black PVC material composition, and maintain length within standard mechanical tolerance for LED standoff spacers. All listed alternatives meet these criteria.

Q: Are there dimensional differences between the substitute parts? A: Yes. The LEDM-2-05 measures 5.00mm, LEDS1-3-26 measures 4.80mm, and ELM 2-200 measures 5.08mm. These variations fall within acceptable tolerance ranges for T1 LED standoff applications.

Q: Do all substitute parts have the same compliance certifications? A: All parts are RoHS compliant and REACH unaffected. The ELM 2-200 carries ROHS3 certification, while LEDM-2-05 and LEDS1-3-26 carry standard RoHS compliance. Both certifications are acceptable for equivalent substitution.

Q: What is the packaging difference between these parts? A: The LEDM-2-05 is supplied in standard packaging, while LEDS1-3-26 and ELM 2-200 are supplied in bulk packaging. Packaging format does not affect component functionality.

Q: Can these parts be used interchangeably in production? A: Yes, provided the PCB assembly design accommodates the mechanical length tolerance of the selected substitute. Verify final assembly height requirements before implementation.