LEDM-1-22 LED Spacer Equivalent & Substitute Parts

Part Overview

The LEDM-1-22 is a T1 3/4 LED standoff spacer manufactured by Essentra Components. This component is a black PVC spacer measuring 0.866" (22.00mm) in length, designed for T1 3/4 LED applications. The part is currently active in production status and fully RoHS compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where dimensional and material tolerances permit.

Substiute Parts

LEDM-1-22

Essentra ComponentsIn Stock: 973LEDM-1-22 Datasheet

Current PartRFQ

LEDM-1-21

Essentra ComponentsIn Stock: 1869LEDM-1-21 Datasheet

Parametric EquivalentRFQ

LEDM-3-21

Essentra ComponentsIn Stock: 2260LEDM-3-21 Datasheet

Parametric EquivalentRFQ

LEDS2-14-26

Essentra ComponentsIn Stock: 1806LEDS2-14-26 Datasheet

Parametric EquivalentRFQ

ELM 1-875

Bivar Inc.In Stock: 20461ELM 1-875 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDM-1-22 are qualified based on the following criteria:

Primary Matching Parameters:

• LED Type: T1 3/4 (all substitutes match this specification)
• Color: Black (all substitutes match this specification)
• Material: PVC (all substitutes match this specification)
• RoHS Compliance: All substitutes maintain RoHS compliance status
• MSL Rating: 1 (Unlimited) (all substitutes match this specification)

Length Tolerance Consideration: Substitutes are grouped by length variance from the main part specification of 22.00mm. Length differences range from 0.039" (1.00mm) shorter to 0.008" (0.22mm) longer, representing dimensional variations within typical mechanical tolerance ranges for PVC spacer components.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status and full RoHS compliance, qualifying them for direct substitution in applications where the specified parameters are met. The LEDM-1-22, LEDS2-14-26, and ELM 1-875 share the closest length specifications, with dimensional variations of 0.008" (0.22mm) or less from the main part. The LEDM-1-21 and LEDM-3-21 variants present a 0.039" (1.00mm) length reduction and are suitable where this dimensional difference is accommodated by the application design. All parts maintain identical LED type, color, material, and moisture sensitivity specifications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the LEDM-1-22? A: Substitute parts must match the T1 3/4 LED type, black color, PVC material composition, and maintain RoHS compliance with MSL rating 1. Length variations are permitted within the dimensional tolerances of the application.

Q: How do the length differences affect compatibility? A: The LEDM-1-22 specifies 22.00mm length. Substitutes LEDS2-14-26 (22.20mm) and ELM 1-875 (22.22mm) vary by less than 0.25mm. The LEDM-1-21 and LEDM-3-21 (21.00mm) represent a 1.00mm reduction. Application mechanical design determines acceptable length variance.

Q: Are there manufacturer differences between substitutes? A: The LEDM-1-22, LEDM-1-21, LEDM-3-21, and LEDS2-14-26 are manufactured by Essentra Components. The ELM 1-875 is manufactured by Bivar Inc. Both manufacturers provide RoHS-compliant components meeting the specified parameters.

Q: What is the significance of the MSL rating? A: All parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: Can packaging differences affect substitution? A: The LEDM-1-22 is supplied in standard packaging. Substitute parts are available in bulk packaging. Packaging format does not affect component functionality or electrical/mechanical performance.