LEDM-1-20 Equivalent & Substitute Parts

Part Overview

The LEDM-1-20 is a T1 3/4 LED standoff spacer manufactured by Essentra Components. This black PVC component measures 0.787" (20.00mm) in length and is designed for T1 3/4 LED applications. The part is Active in product status and RoHS Compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling component interchangeability in assembly applications.

Substiute Parts

LEDM-1-20

Essentra ComponentsIn Stock: 797LEDM-1-20 Datasheet

Current PartRFQ

LEDS2-12-26

Essentra ComponentsIn Stock: 7589LEDS2-12-26 Datasheet

Parametric EquivalentRFQ

LEDS3-12-26

Essentra ComponentsIn Stock: 2287LEDS3-12-26 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LEDM-1-20 are qualified based on the following critical parameters:

• LED Type: T1 3/4 (must match)
• Color: Black (must match)
• Material: PVC (must match)
• RoHS Compliance: RoHS Compliant (must match)
• Product Status: Active (must match)

The substitute parts LEDS2-12-26 and LEDS3-12-26 meet these core criteria. Both are T1 3/4 black PVC LED standoffs manufactured by Essentra Components with Active product status and RoHS Compliance. Length variation exists between the main part (20.00mm) and substitutes (19.05mm), representing a 0.95mm difference. This dimensional tolerance is within acceptable mechanical substitution parameters for LED spacer applications where precise standoff height is not a critical constraint.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and RoHS Compliance, ensuring regulatory alignment for current production environments. The LEDM-1-20 and LEDS3-12-26 are both standard PVC formulations, while LEDS2-12-26 specifies flexible PVC material. Selection between LEDS2-12-26 and LEDS3-12-26 depends on application requirements for material flexibility. The 0.95mm length differential between the main part and both substitutes must be evaluated against specific PCB layout and component clearance constraints in the target assembly.

Frequently Asked Questions (FAQ)

Q: What makes LEDS2-12-26 and LEDS3-12-26 suitable substitutes for LEDM-1-20?

A: Both substitute parts share the critical parameters: T1 3/4 LED type, black color, PVC material, RoHS Compliance, and Active product status. These parameters define functional equivalence for LED standoff applications.

Q: Does the length difference between LEDM-1-20 (20.00mm) and the substitutes (19.05mm) affect compatibility?

A: The 0.95mm length reduction must be evaluated within your specific application. If precise standoff height is critical to PCB clearance or component spacing, this dimensional difference requires design verification. If standoff height tolerance exists in your assembly, the substitutes are mechanically compatible.

Q: What is the difference between LEDS2-12-26 and LEDS3-12-26?

A: LEDS2-12-26 uses flexible PVC material, while LEDS3-12-26 uses standard PVC. Both are equivalent in LED type, length, color, and compliance. Material flexibility may be relevant for applications requiring vibration resistance or mechanical stress absorption.

Q: Are all three parts available in the same packaging format?

A: LEDM-1-20 is packaged as specified in the product data. LEDS2-12-26 and LEDS3-12-26 are supplied in Bulk packaging. Packaging format should be confirmed against your procurement and assembly requirements.

Q: Do all parts meet the same moisture sensitivity requirements?

A: LEDM-1-20 and LEDS2-12-26 both carry MSL Rating 1 (Unlimited). LEDS3-12-26 lists MSL as Not Applicable. For applications with moisture sensitivity constraints, LEDM-1-20 and LEDS2-12-26 provide explicit MSL documentation.