LDBAB2560JC5N0 Equivalent & Substitute Parts

Part Overview

The LDBAB2560JC5N0 is a 0.056 µF film capacitor manufactured by KEMET, rated for 16V DC operation with ±5% tolerance. This surface mount component utilizes polyphenylene sulfide (PPS) metallized-stacked dielectric technology in a 1210 (3225 Metric) package. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring this capacitance and voltage specification.

Substiute Parts

LDBAB2560JC5N0

KEMETIn Stock: 1081LDBAB2560JC5N0 Datasheet

Current PartRFQ

ECH-U1C563GX5

Panasonic Electronic ComponentsIn Stock: 10623ECH-U1C563GX5 Datasheet

DirectRFQ

ECH-U1C563JB5

Panasonic Electronic ComponentsIn Stock: 20227ECH-U1C563JB5 Datasheet

DirectRFQ

ECH-U1C563JX5

Panasonic Electronic ComponentsIn Stock: 3031ECH-U1C563JX5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LDBAB2560JC5N0 are qualified based on the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Capacitance: 0.056 µF (exact match required)
• Voltage Rating - DC: 16V (minimum requirement)
• Dielectric Material: Polyphenylene Sulfide (PPS), Metallized - Stacked (material type match)
• Package / Case: 1210 (3225 Metric) (footprint compatibility)
• Mounting Type: Surface Mount (assembly compatibility)
• Operating Temperature Range: -55°C ~ 125°C (thermal envelope match)
• Termination: Solder Pads (assembly process compatibility)

Secondary Substitution Criteria:

• Tolerance: ±5% or tighter (±2% acceptable as superior specification)
• RoHS Status: ROHS3 Compliant (regulatory compliance match)

All substitute parts listed meet or exceed the primary substitution criteria. Tolerance variations are noted where applicable.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are Active status components from established manufacturers and maintain ROHS3 compliance, ensuring regulatory alignment with the original LDBAB2560JC5N0 specification.

ECH-U1C563GX5 (Panasonic): This substitute offers ±2% tolerance, which is tighter than the ±5% specification of the main part. Moisture sensitivity level is 1 (Unlimited), providing superior moisture handling compared to the main part's MSL 3 rating. Physical dimensions are 0.126" L x 0.098" W, which is 0.004" shorter in length than the main part but remains within the 1210 package classification. Height is identical at 0.067" maximum.

ECH-U1C563JB5 (Panasonic): This substitute matches the ±5% tolerance specification of the main part. Moisture sensitivity level is 1 (Unlimited). Physical dimensions are 0.126" L x 0.098" W. Height is 0.063" maximum, which is 0.004" lower than the main part, providing additional clearance margin in height-constrained applications.

ECH-U1C563JX5 (Panasonic): This substitute matches the ±5% tolerance specification of the main part. Moisture sensitivity level is 1 (Unlimited). Physical dimensions are 0.126" L x 0.098" W. Height is 0.067" maximum, matching the main part exactly.

All three Panasonic substitutes provide improved moisture sensitivity performance (MSL 1 versus MSL 3) and are suitable for direct replacement in applications where the LDBAB2560JC5N0 is specified.

Frequently Asked Questions (FAQ)

Q: Can ECH-U1C563GX5 be used as a direct replacement for LDBAB2560JC5N0?

A: Yes. The ECH-U1C563GX5 meets all primary substitution criteria: 0.056 µF capacitance, 16V DC rating, PPS metallized-stacked dielectric, 1210 package, surface mount termination, and -55°C to 125°C operating range. The ±2% tolerance is tighter than the ±5% specification, which is acceptable. Moisture sensitivity is improved at MSL 1.

Q: What is the difference between ECH-U1C563JB5 and ECH-U1C563JX5?

A: Both parts are identical in electrical specifications: 0.056 µF, ±5% tolerance, 16V DC rating, and PPS dielectric. The primary difference is physical height: ECH-U1C563JB5 has a maximum seated height of 0.063" (1.60mm), while ECH-U1C563JX5 is 0.067" (1.70mm). Select ECH-U1C563JB5 for applications with height constraints.

Q: Are the Panasonic substitutes compatible with the same PCB footprint as LDBAB2560JC5N0?

A: The Panasonic parts have slightly different length dimensions (0.126" versus 0.130"), but all are classified as 1210 (3225 Metric) packages with identical width (0.098") and solder pad termination. PCB footprints designed for 1210 packages accommodate these variations. Verify specific PCB layout requirements for your application.

Q: Why do the Panasonic substitutes have MSL 1 rating while the KEMET part has MSL 3?

A: Moisture sensitivity level (MSL) indicates the maximum time a component can be exposed to moisture before soldering. MSL 1 (Unlimited) provides superior moisture tolerance compared to MSL 3 (168 hours). This is a specification advantage of the Panasonic parts and does not affect substitution compatibility.

Q: Can I use ECH-U1C563GX5 in an application requiring ±5% tolerance?

A: Yes. The ECH-U1C563GX5 has ±2% tolerance, which is tighter than ±5%. A component with tighter tolerance meets or exceeds the requirement for looser tolerance specifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. LDBAB2560JC5N0, ECH-U1C563GX5, ECH-U1C563JB5, and ECH-U1C563JX5 are all ROHS3 compliant, ensuring regulatory alignment for applications subject to RoHS requirements.