LD08SC102MAB1A Equivalent & Substitute Parts Reference

Part Overview

The LD08SC102MAB1A is a 1000 pF ceramic capacitor rated at 1500V (1.5kV) with X7R temperature coefficient, manufactured by KYOCERA AVX in the LD series. This surface mount multilayer ceramic capacitor (MLCC) is designed for general purpose high voltage applications. The part is currently active in production with 680 pieces available in new original stock condition. Substitute parts are identified when equivalent electrical and mechanical specifications are required, or when higher voltage ratings are necessary for circuit redesign or component availability constraints.

Substiute Parts

LD08SC102MAB1A

KYOCERA AVXIn Stock: 768LD08SC102MAB1A Datasheet

Current PartRFQ

LD08GC102MAB1A

KYOCERA AVXIn Stock: 944LD08GC102MAB1A Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LD08SC102MAB1A is determined by the following critical parameters:

Mandatory Matching Parameters:

• Capacitance: 1000 pF
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Package / Case: 1808 (4520 Metric)
• Mounting Type: Surface Mount, MLCC
• Operating Temperature Range: -55°C ~ 125°C
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameter:

• Voltage - Rated: Equal or higher voltage rating is acceptable for direct substitution

The LD08GC102MAB1A qualifies as a substitute part because it maintains all mandatory parameters while providing an upgraded voltage rating of 2000V (2kV), which is higher than the original 1500V specification. This upgrade substitution is electrically compatible and mechanically interchangeable.

Parameter Comparison

Engineering Selection Recommendations

Both the LD08SC102MAB1A and LD08GC102MAB1A are active production parts manufactured by KYOCERA AVX with identical RoHS non-compliant and REACH Affected compliance status. The LD08GC102MAB1A provides a voltage rating upgrade from 1500V to 2000V while maintaining all other electrical and mechanical specifications. Selection between these parts depends on circuit voltage requirements: use the LD08SC102MAB1A for applications rated at 1500V maximum, and use the LD08GC102MAB1A for applications requiring 2000V rated components or where higher voltage margin is specified. Both parts are suitable for general purpose high voltage applications with identical thermal and environmental operating ranges.

Frequently Asked Questions (FAQ)

Q: Can the LD08GC102MAB1A replace the LD08SC102MAB1A in my circuit?

A: Yes. The LD08GC102MAB1A is electrically and mechanically compatible. It maintains identical capacitance, tolerance, temperature coefficient, package dimensions, and operating temperature range. The higher voltage rating (2000V vs 1500V) makes it suitable for direct substitution in applications originally designed for the LD08SC102MAB1A.

Q: Are there any physical differences between these parts?

A: No. Both parts use the identical 1808 (4520 Metric) package with dimensions of 0.180" L x 0.080" W (4.57mm x 2.03mm) and maximum thickness of 0.080" (2.03mm). They are mechanically interchangeable on PCBs designed for either part.

Q: What is the difference between these two parts?

A: The primary difference is the rated voltage specification. The LD08SC102MAB1A is rated at 1500V (1.5kV), while the LD08GC102MAB1A is rated at 2000V (2kV). All other parameters including capacitance value, tolerance, temperature coefficient, package, and operating temperature range are identical.

Q: Which part should I use for a new design?

A: Selection depends on your circuit voltage requirements. If your application operates at or below 1500V, either part is acceptable. If your application requires higher voltage margin or operates above 1500V, use the LD08GC102MAB1A rated at 2000V.

Q: Are both parts currently available?

A: Yes. The LD08SC102MAB1A has 680 pieces in new original stock, and the LD08GC102MAB1A has 853 pieces in new original stock.