LD06YC225KAB2A Equivalent & Substitute Parts

Part Overview

The LD06YC225KAB2A is an active-status ceramic capacitor manufactured by KYOCERA AVX, supplied in Tape & Reel (TR) packaging with an inventory of 843 pieces available. This component is designated for general SMD capacitor applications. Location of suitable substitute parts becomes necessary when addressing supply chain continuity, specific compliance requirements, or obtaining higher inventory availability from alternative manufacturers.

Substiute Parts

LD06YC225KAB2A

KYOCERA AVXIn Stock: 905LD06YC225KAB2A Datasheet

Current PartRFQ

C1206C225K4RAC7800

KEMETIn Stock: 125300C1206C225K4RAC7800 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic is based on matching core electrical and mechanical parameters across manufacturers. The primary substitute identified is the C1206C225K4RAC7800 from KEMET, which shares critical commonalities with the main part:

Key Parameters for Substitution Assessment:

• Capacitance value: 2.2 µF
• Voltage rating: 16V
• Temperature coefficient: X7R
• Dielectric type: Ceramic (MLCC)
• Package designation: 1206 (3216 Metric)
• Mounting type: Surface Mount
• Moisture sensitivity: MSL 1
• HTSUS classification: 8532.24.0020

The C1206C225K4RAC7800 qualifies as a direct functional equivalent based on these aligned parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the LD06YC225KAB2A and C1206C225K4RAC7800 are active-status components with identical electrical characteristics and package dimensions. The primary distinction lies in compliance certification:

The C1206C225K4RAC7800 carries ROHS3 compliance and REACH Unaffected status, whereas the LD06YC225KAB2A is RoHS non-compliant and REACH Affected. For applications subject to regulatory frameworks requiring RoHS3 compliance or REACH compliance, the C1206C225K4RAC7800 from KEMET is the appropriate selection. Both parts share identical MSL classification, voltage rating, temperature coefficient, and mechanical footprint, confirming direct substitutability.

Frequently Asked Questions (FAQ)

Q: Are the LD06YC225KAB2A and C1206C225K4RAC7800 electrically interchangeable?

A: Yes. Both components are 2.2 µF ±10% ceramic capacitors with 16V rated voltage, X7R temperature coefficient, and -55°C to 125°C operating temperature range. Electrical performance is identical.

Q: Do these parts share the same physical footprint?

A: Yes. Both are 1206 (3216 Metric) case-sized components with identical length (0.126" / 3.20mm) and width (0.063" / 1.60mm) dimensions. Mechanical substitution is direct.

Q: What is the significance of the RoHS and REACH status difference?

A: The C1206C225K4RAC7800 meets ROHS3 compliance requirements and carries REACH Unaffected status. The LD06YC225KAB2A does not meet these standards. Selection depends on regulatory requirements applicable to your end-use application.

Q: Do moisture sensitivity levels differ?

A: No. Both parts are classified as MSL 1 (Unlimited), indicating identical moisture handling and storage requirements.

Q: Is inventory availability a factor in substitution selection?

A: The C1206C225K4RAC7800 has substantially higher inventory availability (125195 pieces versus 843 pieces). Supply chain continuity may favor the KEMET component for high-volume applications.