LD02YC472JAB2A

Part Overview

The LD02YC472JAB2A is a ceramic capacitor manufactured by KYOCERA AVX, currently in active product status. This component is a surface-mount, multilayer ceramic capacitor (MLCC) supplied in Tape & Reel packaging. Alternative models are identified to provide design flexibility, ensure inventory continuity, and accommodate supply chain variations while maintaining electrical and mechanical equivalence.

Substiute Parts

LD02YC472JAB2A

KYOCERA AVXIn Stock: 887LD02YC472JAB2A Datasheet

Current PartRFQ

KGM05AR71C472JH

KYOCERA AVXIn Stock: 872KGM05AR71C472JH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are qualified based on the following electrical and mechanical parameters derived from the input specification:

Key Substitution Criteria:

• Capacitance value (4700 pF nominal)
• Voltage rating (16V minimum)
• Package type (0402 / 1005 Metric surface mount)
• Temperature coefficient (X7R)
• Mounting technology (Surface Mount, MLCC)
• Moisture sensitivity classification (MSL 1)
• Regulatory compliance (REACH and RoHS status)

The identified substitute KGM05AR71C472JH meets these parameters within the allowed tolerance range (±5%), ensuring direct functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both parts are manufactured by KYOCERA AVX and share identical packaging, mounting technology, and regulatory classification. The KGM05AR71C472JH substitute is fully active in production status. Selection between the LD02YC472JAB2A and KGM05AR71C472JH should be based on availability, supply chain requirements, and compliance needs specific to the application.

The RoHS non-compliance status of LD02YC472JAB2A must be evaluated against project and regional regulatory requirements. The REACH-affected designation applies to the primary part; the RoHS3 compliance status of the substitute should be cross-referenced with end-product compliance documentation.

Frequently Asked Questions (FAQ)

Q: Can KGM05AR71C472JH be used directly in place of LD02YC472JAB2A?

A: Yes. Both parts share the same capacitance value (4700 pF), voltage rating (16V), temperature coefficient (X7R), package type (0402), and MSL classification (1). Surface-mount placement compatibility is identical.

Q: Are there dimensional or footprint differences between these parts?

A: No. Both components use the 0402 (1005 Metric) package format, with equivalent maximum thickness of 0.55mm. PCB footprints and reflow profiles remain unchanged.

Q: What is the significance of the MSL 1 classification for both parts?

A: MSL 1 indicates unlimited moisture sensitivity, meaning these components do not require dry-pack storage or moisture bake-out procedures prior to assembly.

Q: How does the RoHS compliance difference affect substitution?

A: LD02YC472JAB2A is RoHS non-compliant, while KGM05AR71C472JH is RoHS3 compliant. Selection depends on the end-product's RoHS requirement. If RoHS3 compliance is mandatory, KGM05AR71C472JH is the appropriate choice.

Q: Are these parts subject to export control restrictions?

A: Both parts carry an ECCN classification of EAR99, which applies standard commercial export rules. Consult regional trade compliance requirements for your specific destination.