LD02YA220JAB2A Equivalent & Substitute Parts

Part Overview

The LD02YA220JAB2A is a 22 pF ceramic capacitor manufactured by KYOCERA AVX, rated at 16V with C0G/NP0 temperature coefficient in 0402 (1005 Metric) surface mount package. This component is classified as Active product status with general purpose applications. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, design optimization, or voltage rating upgrades while maintaining the same capacitance value and package footprint.

Substiute Parts

LD02YA220JAB2A

KYOCERA AVXIn Stock: 1095LD02YA220JAB2A Datasheet

Current PartRFQ

LD025A220FAB2A

KYOCERA AVXIn Stock: 18922LD025A220FAB2A Datasheet

UpgradeRFQ

LD025A220JAB2A

KYOCERA AVXIn Stock: 2025LD025A220JAB2A Datasheet

UpgradeRFQ

C0402C220J5GAL7867

KEMETIn Stock: 29433C0402C220J5GAL7867 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LD02YA220JAB2A is determined by the following mandatory parameters:

• Capacitance: Must be 22 pF (exact match required)
• Package / Case: Must be 0402 (1005 Metric) for mechanical and electrical compatibility
• Temperature Coefficient: Must be C0G or NP0 for frequency stability
• Mounting Type: Must be Surface Mount, MLCC
• Operating Temperature Range: Must support -55°C ~ 125°C minimum
• Moisture Sensitivity Level: Must be MSL 1 or equivalent

Voltage rating may be upgraded from 16V to higher ratings (50V) without affecting substitution validity, as higher voltage ratings provide additional design margin. Tolerance may be tightened from ±5% to ±1% without affecting substitution validity. Manufacturer and series changes are acceptable provided all electrical and mechanical parameters remain within specification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status, ensuring long-term availability and manufacturing support. The three qualified substitutes—LD025A220FAB2A, LD025A220JAB2A, and C0402C220J5GAL7867—are electrically and mechanically compatible with the LD02YA220JAB2A.

LD025A220FAB2A offers the tightest tolerance specification (±1%) with 50V voltage rating, providing enhanced frequency stability and increased design margin. LD025A220JAB2A maintains the original ±5% tolerance while upgrading to 50V rating. C0402C220J5GAL7867 from KEMET provides a cross-manufacturer alternative with identical electrical specifications and 50V rating, with documented Low ESL feature.

All substitutes comply with REACH Affected or REACH Unaffected status and carry EAR99 ECCN classification. RoHS non-compliance status is consistent across all parts. Selection between substitutes should be based on tolerance requirements, voltage margin needs, and manufacturer preference within the design constraints.

Frequently Asked Questions (FAQ)

Q: Can LD025A220FAB2A replace LD02YA220JAB2A in all applications?

A: Yes. LD025A220FAB2A is electrically and mechanically compatible. The 50V voltage rating provides additional design margin over the original 16V rating. The ±1% tolerance is tighter than the original ±5%, improving frequency stability. Both parts share identical package dimensions, temperature coefficient, and operating temperature range.

Q: What is the difference between LD025A220FAB2A and LD025A220JAB2A?

A: Both parts are KYOCERA AVX 22 pF, 50V, 0402 ceramic capacitors with C0G/NP0 temperature coefficient. The primary difference is tolerance: LD025A220FAB2A specifies ±1% while LD025A220JAB2A specifies ±5%. Selection depends on tolerance requirements for the application.

Q: Is C0402C220J5GAL7867 from KEMET a direct substitute?

A: Yes. C0402C220J5GAL7867 meets all substitution criteria with 22 pF capacitance, 50V rating, ±5% tolerance, C0G/NP0 temperature coefficient, and 0402 package. It is a cross-manufacturer alternative from KEMET with documented Low ESL characteristics.

Q: Can I use a 50V rated capacitor in place of a 16V rated capacitor?

A: Yes. Higher voltage ratings are acceptable substitutes. A 50V rated capacitor provides additional voltage margin and does not degrade performance in applications designed for 16V operation.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) packaging, maintaining compatibility with automated assembly processes.

Q: What is the significance of C0G/NP0 temperature coefficient?

A: C0G and NP0 designations indicate negligible temperature coefficient, ensuring stable capacitance across the -55°C ~ 125°C operating range. This characteristic is mandatory for all listed parts and substitutes.

Q: Do all parts meet MSL 1 moisture sensitivity requirements?

A: Yes. All listed parts and substitutes carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity limitations for storage and handling.