LCMC95-12-X Equivalent & Substitute Parts

Part Overview

The LCMC95-12-X is a terminal connector rectangular ring manufactured by Panduit Corp, designed for tubular ring terminations with a 95mm² wire gauge capacity. This component features an M12 stud configuration with two stud holes and is terminated through crimp barrel methodology. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and support ongoing applications requiring this terminal specification.

Substiute Parts

LCMC95-12-X

Panduit CorpIn Stock: 651LCMC95-12-X Datasheet

Current PartRFQ

LCMC95-00-X

Panduit CorpIn Stock: 1049LCMC95-00-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMC95-12-X is determined by the following critical parameters:

Primary Compatibility Criteria:

• Wire gauge capacity: 95mm²
• Terminal type: Ring, Tubular
• Termination method: Crimp, Barrel
• Contact material: Copper
• Contact finish: Tin
• Mounting type: Free Hanging (In-Line)
• Base product series: LCMC
• Regulatory compliance: ROHS3 Compliant

Substitution Constraint: The LCMC95-00-X serves as an equivalent substitute with the following distinction: it features a no-stud-hole terminal style, whereas the LCMC95-12-X incorporates two stud holes for M12 stud mounting. This structural difference requires application-level assessment to determine compatibility based on mounting requirements.

Parameter Comparison

Engineering Selection Recommendations

The LCMC95-00-X is the active equivalent substitute for the obsolete LCMC95-12-X. Both components maintain identical wire gauge capacity (95mm²), barrel dimensions, overall length, and width specifications. Both are ROHS3 compliant and utilize identical termination methodology (crimp, barrel) with copper contacts finished in tin.

The primary distinction between these parts is the terminal style configuration. The LCMC95-12-X incorporates two stud holes designed for M12 stud mounting applications, while the LCMC95-00-X features a no-stud-hole design. Selection between these components depends on whether the application requires stud-hole mounting capability.

The LCMC95-00-X is currently in active production status with 1,016 pieces in stock inventory, ensuring supply availability. The LCMC95-12-X, though obsolete with 618 pieces remaining in inventory, can be replaced by the LCMC95-00-X in applications where stud-hole mounting is not a functional requirement.

Frequently Asked Questions (FAQ)

Q: Can the LCMC95-00-X directly replace the LCMC95-12-X in all applications?

A: The LCMC95-00-X shares identical electrical and mechanical specifications with the LCMC95-12-X except for terminal style. Direct replacement is possible only in applications where stud-hole mounting is not required. Applications utilizing M12 stud mounting require the two-stud-hole configuration of the LCMC95-12-X.

Q: What are the critical parameters that determine substitution eligibility?

A: Substitution eligibility is determined by wire gauge (95mm²), terminal type (ring, tubular), termination method (crimp, barrel), contact material (copper), contact finish (tin), mounting type (free hanging in-line), and regulatory compliance (ROHS3). The terminal style (stud holes versus no stud holes) is the distinguishing factor between these equivalent parts.

Q: Are both parts ROHS3 compliant?

A: Yes, both the LCMC95-12-X and LCMC95-00-X are ROHS3 compliant. Both components are also REACH unaffected and classified under ECCN EAR99.

Q: What is the difference in tab thickness between these parts?

A: The LCMC95-12-X has a tab thickness of 0.118" (3.00mm), while the LCMC95-00-X has a tab thickness of 0.114" (2.90mm). This 0.004" (0.10mm) difference is within normal manufacturing tolerance ranges for this terminal category.

Q: What packaging options are available?

A: The LCMC95-12-X is supplied in standard packaging, while the LCMC95-00-X is supplied in bulk packaging. Both are available from current inventory.

Q: Why is the LCMC95-12-X classified as obsolete?

A: The LCMC95-12-X is obsolete due to product line consolidation. The LCMC95-00-X serves as the active production equivalent, providing the same electrical and mechanical performance for applications not requiring stud-hole mounting.