LCMB16-8-L Ring Terminal Connector M8 Equivalent & Substitute Parts

Part Overview

The LCMB16-8-L is a ring terminal connector manufactured by Panduit Corp, designed for M8 stud applications with 16mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination. The LCMB16-8-L is currently listed as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure design compatibility in applications requiring this terminal type.

Substiute Parts

LCMB16-8-L

Panduit CorpIn Stock: 963LCMB16-8-L Datasheet

Current PartRFQ

LCMA16-8-C

Panduit CorpIn Stock: 1251LCMA16-8-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMB16-8-L is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Stud/Tab Size: M8 Stud
• Wire Gauge: 16mm²
• Terminal Type: Flat Sided, Tubular (Battery Lugs)
• Termination Method: Crimp
• Contact Material: Copper
• Contact Finish: Tin
• Insulation: Non-Insulated

Compliance Parameters:

• RoHS3 Compliant
• REACH Unaffected

The LCMA16-8-C meets all mandatory matching parameters and maintains equivalent compliance certifications. Both components are manufactured by Panduit Corp and function identically within the specified electrical and mechanical constraints. The primary distinction between these parts is product status (obsolete versus active) and dimensional variation in overall length, which does not affect functional compatibility in standard M8 stud applications.

Parameter Comparison

Engineering Selection Recommendations

The LCMA16-8-C is the direct active equivalent for the obsolete LCMB16-8-L. Both components satisfy identical electrical and mechanical requirements for M8 stud ring terminal applications with 16mm² wire gauge capacity.

Selection Basis:

The LCMA16-8-C maintains active product status with Panduit Corp, ensuring continued availability and supply chain reliability. Both parts carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component manufacturing and distribution.

The dimensional difference in overall length (1.858" versus 1.358") reflects design optimization within the Pan-Lug™ series but does not compromise functional compatibility in standard mounting configurations. The reduction in length provides equivalent electrical performance while accommodating space-constrained applications.

For new designs or component replacement in existing applications, the LCMA16-8-C is the appropriate selection due to its active status and full compliance with current manufacturing standards.

Frequently Asked Questions (FAQ)

Q: Can LCMA16-8-C replace LCMB16-8-L in existing assemblies?

A: Yes. Both components are functionally equivalent for M8 stud applications. The LCMA16-8-C provides identical electrical performance and mechanical interface. The shorter overall length of the LCMA16-8-C (1.358" versus 1.858") does not affect stud connection or wire termination compatibility.

Q: What is the primary reason for substitution?

A: The LCMB16-8-L is obsolete. The LCMA16-8-C is the active equivalent from Panduit Corp, ensuring continued supply availability and compliance with current manufacturing standards.

Q: Are there any compliance differences between these parts?

A: No. Both components are ROHS3 compliant and REACH unaffected. They meet identical regulatory requirements for electronic component applications.

Q: Does the length difference affect wire gauge or stud size compatibility?

A: No. Both components accommodate 16mm² wire gauge and M8 stud connections identically. The length variation reflects design optimization within the product series and does not alter electrical or mechanical interface specifications.

Q: What is the contact material and finish for both parts?

A: Both components feature copper contact material with tin finish, providing equivalent electrical conductivity and corrosion resistance for battery lug and high-current applications.

Q: Are both parts non-insulated?

A: Yes. Both LCMB16-8-L and LCMA16-8-C are non-insulated ring terminals, suitable for applications requiring direct metal-to-metal contact at the M8 stud interface.

Q: What termination method is used?

A: Both components use crimp termination for 16mm² wire connections, requiring standard crimping tools and procedures compatible with this wire gauge specification.