LCMB10-8-L Ring Terminal Connector M8 Equivalent & Substitute Parts

Part Overview

The LCMB10-8-L is a ring terminal connector manufactured by Panduit Corp, designed for M8 stud applications with 10mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination. The LCMB10-8-L is currently listed as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and ensure availability for new designs and replacement applications.

Substiute Parts

LCMB10-8-L

Panduit CorpIn Stock: 862LCMB10-8-L Datasheet

Current PartRFQ

LCMA10-8-C

Panduit CorpIn Stock: 1916LCMA10-8-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMB10-8-L is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Stud/Tab Size: M8 Stud (mechanical interface requirement)
• Wire Gauge: 10mm² (current-carrying capacity)
• Contact Material: Copper (electrical conductivity)
• Contact Finish: Tin (corrosion resistance and solderability)
• Termination Method: Crimp (assembly process compatibility)

Mechanical Compatibility Parameters:

• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor and application class)
• Insulation: Non-Insulated (environmental exposure class)
• Mounting Type: Free Hanging (In-Line) (installation configuration)

Regulatory Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The LCMA10-8-C meets all critical substitution criteria and is classified as an active product, providing supply continuity for the obsolete LCMB10-8-L.

Parameter Comparison

Engineering Selection Recommendations

The LCMA10-8-C is the direct substitute for the obsolete LCMB10-8-L. Both components share identical electrical and mechanical specifications across all critical parameters: M8 stud interface, 10mm² wire gauge capacity, copper with tin contact finish, crimp termination, and flat-sided tubular battery lug configuration.

The LCMA10-8-L differs from the LCMB10-8-L in overall length (1.213" versus 1.724"), representing a design refinement within the Pan-Lug™ series. This dimensional difference does not affect electrical performance or stud compatibility and reflects the evolution of the product line from the obsolete LCMB series to the active LCMA series.

Both components maintain full ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current and future applications. The LCMA10-8-C is available in bulk packaging with 1870 units in stock, providing immediate supply availability compared to the limited remaining inventory of the obsolete LCMB10-8-L.

Frequently Asked Questions (FAQ)

Q: Can the LCMA10-8-C directly replace the LCMB10-8-L in existing designs?

A: Yes. The LCMA10-8-C provides direct electrical and mechanical compatibility. Both components feature identical M8 stud size, 10mm² wire gauge, copper-tin contact construction, and crimp termination. The dimensional difference in overall length (1.213" versus 1.724") does not affect functional performance or interface compatibility.

Q: What is the significance of the length difference between these two parts?

A: The LCMA10-8-C has a shorter overall length (1.213") compared to the LCMB10-8-L (1.724"). This represents a design optimization within Panduit's product evolution. The length difference does not impact electrical characteristics, stud engagement, or wire gauge capacity. Physical space constraints in the application should be evaluated to confirm the shorter length is acceptable.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the LCMB10-8-L and LCMA10-8-C maintain identical RoHS3 compliance and REACH unaffected status. No regulatory barriers exist to substitution.

Q: Why is the LCMB10-8-L classified as obsolete?

A: The LCMB10-8-L has been superseded by the LCMA10-8-C within Panduit's active product portfolio. The LCMA series represents the current generation of ring terminal connectors in this specification class. The LCMB10-8-L remains available in limited inventory (830 units) but is no longer in active production.

Q: What packaging differences exist between these parts?

A: The LCMB10-8-L is supplied in standard packaging, while the LCMA10-8-C is supplied in bulk packaging. The LCMA10-8-C has significantly higher inventory availability (1870 units) compared to the LCMB10-8-L (830 units), making it the preferred choice for new procurement.

Q: Are the contact materials and finishes identical?

A: Yes. Both components use copper as the contact material with tin finish. This ensures identical electrical conductivity, corrosion resistance, and solderability characteristics.

Q: Can the LCMA10-8-C be used in applications originally designed for the LCMB10-8-L?

A: Yes, provided the shorter overall length (1.213" versus 1.724") does not create physical interference or spacing conflicts within the assembly. The electrical and mechanical interface specifications are fully compatible.