LCMAX50-10-L Ring Terminal Connector M10 Equivalent & Substitute Parts

Part Overview

The LCMAX50-10-L is a ring terminal connector manufactured by Panduit Corp, designed for M10 stud applications with 50mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCMAX50-10-L

Panduit CorpIn Stock: 768LCMAX50-10-L Datasheet

Current PartRFQ

LCMA50-10-L

Panduit CorpIn Stock: 1161LCMA50-10-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMAX50-10-L is determined by strict equivalence across the following critical parameters:

• Stud/Tab Size: M10 Stud (mechanical interface requirement)
• Wire Gauge: 50mm² (electrical current capacity)
• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor and application class)
• Termination Method: Crimp (assembly process compatibility)
• Contact Material: Copper (electrical conductivity)
• Contact Finish: Tin (corrosion resistance and solderability)
• Insulation: Non-Insulated (environmental exposure class)
• Mounting Type: Free Hanging (In-Line) (installation configuration)

The LCMA50-10-L meets all substitution criteria as an active product from the same manufacturer within the Pan-Lug™ series, maintaining functional equivalence despite dimensional variations in thickness, width, and overall length.

Parameter Comparison

Engineering Selection Recommendations

The LCMA50-10-L serves as the functional equivalent for the obsolete LCMAX50-10-L. Both components share identical specifications for the critical parameters governing electrical and mechanical compatibility: M10 stud interface, 50mm² wire gauge capacity, copper-tin contact system, and crimp termination methodology.

The LCMA50-10-L is classified as an active product with ROHS3 compliance and REACH unaffected status, providing regulatory alignment for current manufacturing and procurement requirements. The dimensional reductions in thickness, width, and overall length reflect design optimization within the Pan-Lug™ series while maintaining functional equivalence for the specified application.

Selection of the LCMA50-10-L eliminates obsolescence risk and ensures access to current inventory and manufacturing support from Panduit Corp.

Frequently Asked Questions (FAQ)

Q: Can the LCMA50-10-L directly replace the LCMAX50-10-L in existing applications?

A: Yes. Both components share identical stud size (M10), wire gauge (50mm²), terminal type (flat-sided tubular battery lug), contact material (copper), contact finish (tin), and termination method (crimp). These parameters define functional compatibility for the application interface.

Q: What are the dimensional differences between these parts?

A: The LCMA50-10-L exhibits reduced dimensions compared to the LCMAX50-10-L: thickness is 0.098" versus 0.112", width is 0.709" versus 0.819", and overall length is 1.831" versus 2.106". These differences reflect design refinement and do not affect electrical or mechanical performance for the specified M10 stud and 50mm² wire gauge application.

Q: Why is the LCMAX50-10-L listed as obsolete?

A: Product obsolescence typically reflects manufacturer discontinuation in favor of improved designs. The LCMA50-10-L represents the current active equivalent within Panduit Corp's product line.

Q: Are there compliance differences between the two parts?

A: The LCMA50-10-L carries ROHS3 compliance and REACH unaffected status. The LCMAX50-10-L specifications do not include these compliance designations. For applications requiring regulatory compliance documentation, the LCMA50-10-L is the appropriate selection.

Q: What packaging options are available?

A: The LCMAX50-10-L is supplied in unspecified packaging with 690 pieces in stock. The LCMA50-10-L is supplied in bulk packaging with 1072 pieces in stock.

Q: Are both parts manufactured by the same company?

A: Yes. Both the LCMAX50-10-L and LCMA50-10-L are manufactured by Panduit Corp, ensuring consistent quality standards and design philosophy across the product transition.