LCMAX150-10-X Ring Terminal Connector Equivalent & Substitute Parts

Part Overview

The LCMAX150-10-X is a ring terminal connector manufactured by Panduit Corp, designed for M10 stud applications with 150mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination and non-insulated copper construction with tin finish.

The LCMAX150-10-X carries an obsolete product status. Identification of equivalent and substitute parts is necessary to maintain system continuity and ensure procurement availability for applications requiring this terminal specification.

Substiute Parts

LCMAX150-10-X

Panduit CorpIn Stock: 748LCMAX150-10-X Datasheet

Current PartRFQ

LCMA150-10-X

Panduit CorpIn Stock: 734LCMA150-10-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMAX150-10-X is determined by the following critical parameters that must remain constant across equivalent parts:

• Stud/Tab Size: M10 Stud (mechanical interface requirement)
• Wire Gauge: 150mm² (electrical capacity requirement)
• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor requirement)
• Termination Method: Crimp (assembly process requirement)
• Contact Material: Copper (electrical conductivity requirement)
• Contact Finish: Tin (corrosion resistance requirement)
• Insulation: Non-Insulated (application requirement)

The LCMA150-10-X meets all critical substitution criteria. Both parts share identical stud size, wire gauge capacity, terminal type, termination method, contact material, contact finish, and insulation specification. Dimensional variations exist within acceptable tolerances for this product category.

Parameter Comparison

Engineering Selection Recommendations

The LCMA150-10-X is a direct functional substitute for the obsolete LCMAX150-10-X. Both components share identical electrical and mechanical specifications for M10 stud connection with 150mm² wire gauge capacity.

The LCMA150-10-X carries active product status, ensuring ongoing availability and supply chain continuity. This part is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component procurement.

Dimensional differences between the main part and substitute are minor and do not affect functional performance or mechanical compatibility in M10 stud applications. The substitute part maintains equivalent electrical conductivity, corrosion resistance, and crimp termination characteristics.

Frequently Asked Questions (FAQ)

Q: Can the LCMA150-10-X replace the LCMAX150-10-X in existing applications?

A: Yes. Both parts are specified for M10 stud connection, 150mm² wire gauge, flat-sided tubular terminal type, crimp termination, copper construction with tin finish, and non-insulated configuration. Functional compatibility is established across all critical electrical and mechanical parameters.

Q: What are the dimensional differences between these parts?

A: The LCMA150-10-X has slightly reduced dimensions compared to the LCMAX150-10-X. Thickness is 0.175" (4.45mm) versus 0.179" (4.55mm), width is 1.201" (30.51mm) versus 1.319" (33.50mm), and length is 2.776" (70.50mm) versus 2.854" (72.49mm). These variations remain within acceptable tolerances for this terminal category and do not compromise mechanical fit or electrical performance.

Q: Why is the LCMAX150-10-X listed as obsolete?

A: The LCMAX150-10-X has been superseded by the LCMA150-10-X within the Panduit product line. The LCMA150-10-X is the active equivalent offering identical functional specifications with current regulatory compliance.

Q: Are there packaging differences between these parts?

A: The LCMAX150-10-X is supplied in unspecified packaging, while the LCMA150-10-X is supplied in bulk packaging. Both are available in new original condition with substantial inventory levels.

Q: Do these parts meet current regulatory standards?

A: The LCMA150-10-X is ROHS3 compliant and REACH unaffected. Both parts are classified under ECCN EAR99 and HTSUS 8536.90.4000. The substitute part meets current regulatory requirements for component procurement.

Q: What is the contact material and finish specification?

A: Both parts feature copper contact material with tin finish. This specification provides electrical conductivity and corrosion resistance suitable for M10 stud terminal applications.