LCMA6-8-C Equivalent & Substitute Parts

Part Overview

The LCMA6-8-C is a ring terminal connector manufactured by Panduit Corp, designed for crimp termination on wire gauges 4.0 to 6.0mm². This non-insulated, copper terminal features a flat-sided tubular design (battery lug style) with an M8 stud for free-hanging, in-line mounting applications. The part is ROHS3 compliant and REACH unaffected.

The LCMA6-8-C is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for applications requiring this terminal specification.

Substiute Parts

LCMA6-8-C

Panduit CorpIn Stock: 1045LCMA6-8-C Datasheet

Current PartRFQ

LCMA6-10-C

Panduit CorpIn Stock: 748LCMA6-10-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMA6-8-C is limited by the following critical parameters:

Stud Size Constraint: The M8 stud specification is application-specific and determines the mounting interface. Substitutes must accommodate M8 stud connections.

Wire Gauge Compatibility: The 4.0 to 6.0mm² wire gauge range defines the barrel dimensions and crimp characteristics. Substitutes must support equivalent wire cross-sections.

Terminal Style and Material: Copper construction with tin finish and non-insulated design are standard for this product line. Substitutes maintain these material specifications.

Termination Method: Crimp termination is the specified connection method. Substitutes must use crimp termination.

Mounting Configuration: Free-hanging, in-line mounting is required for this application class.

The LCMA6-10-C is identified as a substitute part within the Panduit Pan-Lug™ series. However, this substitute operates under different stud and wire gauge parameters, requiring engineering evaluation for specific application compatibility.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The LCMA6-8-C is obsolete, while the LCMA6-10-C is active. Active status indicates ongoing manufacturing support and availability.

Compliance Alignment: Both parts are ROHS3 compliant and REACH unaffected, maintaining regulatory consistency across the Panduit Pan-Lug™ series.

Stud and Wire Gauge Differences: The LCMA6-10-C operates with an M10 stud and 10-12 AWG wire gauge, differing from the M8 stud and 4.0-6.0mm² specification of the LCMA6-8-C. These differences require application-specific evaluation to determine compatibility with existing mounting interfaces and wire termination requirements.

Dimensional Variations: The LCMA6-10-C exhibits larger overall dimensions (length and width) compared to the LCMA6-8-C, reflecting its larger stud and wire gauge capacity.

Material and Finish Consistency: Both parts maintain copper construction with tin finish and non-insulated design, ensuring electrical and corrosion performance alignment within the product family.

Frequently Asked Questions (FAQ)

Q: Can the LCMA6-10-C directly replace the LCMA6-8-C in existing applications?

A: Direct replacement depends on application-specific requirements. The LCMA6-10-C features an M10 stud versus the M8 stud of the LCMA6-8-C. The mounting interface must accommodate the larger stud diameter. Additionally, the LCMA6-10-C is rated for 10-12 AWG wire, which differs from the 4.0-6.0mm² specification of the LCMA6-8-C. Wire gauge compatibility with the application must be confirmed.

Q: What are the key differences between these two terminal connectors?

A: The primary differences are stud size (M8 versus M10), wire gauge rating (4.0-6.0mm² versus 10-12 AWG), and overall dimensions. The LCMA6-8-C is optimized for smaller wire cross-sections with an M8 mounting interface, while the LCMA6-10-C accommodates larger wire gauges with an M10 interface. Both maintain identical material composition, finish, and termination method.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the LCMA6-8-C and LCMA6-10-C are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What is the significance of the LCMA6-8-C being classified as obsolete?

A: Obsolete status indicates that the LCMA6-8-C is no longer in active production. The LCMA6-10-C, classified as active, represents the current manufacturing offering within the Panduit Pan-Lug™ series. For new designs or component replenishment, the active substitute should be evaluated for compatibility.

Q: Are there packaging differences between these parts?

A: The LCMA6-8-C packaging information is not specified in the available data. The LCMA6-10-C is supplied in bulk packaging. Packaging specifications should be confirmed with the manufacturer for procurement planning.

Q: Do both terminals use the same termination method?

A: Yes. Both the LCMA6-8-C and LCMA6-10-C use crimp termination, ensuring process compatibility within manufacturing workflows that employ standard crimp tooling.