LCMA50-10H-L Ring Terminal Connector M10 Equivalent & Substitute Parts

Part Overview

The LCMA50-10H-L is a ring terminal connector manufactured by Panduit Corp, classified within the Pan-Lug™ series. This component is a flat-sided, tubular battery lug designed for M10 stud termination with 50mm² wire gauge capacity. The part features crimp termination, copper contact material with tin finish, and is non-insulated.

The LCMA50-10H-L carries an obsolete product status. Identification of equivalent and substitute parts is necessary to maintain design continuity, ensure procurement availability, and support ongoing system maintenance and repair operations.

Substiute Parts

LCMA50-10H-L

Panduit CorpIn Stock: 1100LCMA50-10H-L Datasheet

Current PartRFQ

LCMA50-10-L

Panduit CorpIn Stock: 1161LCMA50-10-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMA50-10H-L is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: Panduit Corp
• Series: Pan-Lug™
• Terminal Type: Flat Sided, Tubular (Battery Lugs)
• Stud/Tab Size: M10 Stud
• Wire Gauge: 50mm²
• Termination Method: Crimp
• Contact Material: Copper
• Contact Finish: Tin
• Insulation: Non-Insulated
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The substitute part LCMA50-10-L meets all mandatory matching parameters. The primary distinction between the main part and its substitute is the product status transition from obsolete to active, along with documented dimensional specifications for the substitute part. Both parts share identical electrical and mechanical interface characteristics required for M10 stud ring terminal applications with 50mm² wire capacity.

Parameter Comparison

Engineering Selection Recommendations

LCMA50-10-L is the direct substitute for LCMA50-10H-L. Selection of this substitute part is supported by the following engineering considerations:

Product Status: The LCMA50-10-L maintains active product status with Panduit Corp, ensuring ongoing availability and manufacturing support. The obsolete status of the LCMA50-10H-L necessitates transition to an actively produced equivalent.

Compliance Alignment: Both parts maintain identical ROHS3 compliance and REACH unaffected status, confirming regulatory equivalence for applications subject to these standards.

Electrical and Mechanical Compatibility: The substitute part preserves all critical interface parameters: M10 stud termination, 50mm² wire gauge capacity, copper contact material with tin finish, and crimp termination methodology. Dimensional specifications for the substitute part (0.098" thickness, 1.831" overall length, 0.709" outer width) define the physical envelope for this terminal type.

Packaging Consideration: The LCMA50-10-L is supplied in bulk packaging, whereas the main part packaging specification is not documented. Procurement planning should account for this packaging difference.

Frequently Asked Questions (FAQ)

Q: Can LCMA50-10-L be used as a direct replacement for LCMA50-10H-L in existing designs?

A: Yes. Both parts share identical terminal type classification, stud size (M10), wire gauge capacity (50mm²), contact material (copper with tin finish), and termination method (crimp). The electrical and mechanical interface characteristics are equivalent.

Q: What is the primary reason for substitution?

A: The LCMA50-10H-L is classified as obsolete. The LCMA50-10-L is the active equivalent part from the same manufacturer and series, ensuring continued procurement availability and manufacturing support.

Q: Are there compliance differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance status and REACH unaffected designation. Regulatory requirements are satisfied by either part.

Q: How do the dimensional specifications compare?

A: The LCMA50-10-L provides complete dimensional documentation: 0.098" (2.49mm) thickness, 1.831" (46.50mm) overall length, and 0.709" (18.00mm) outer width. The main part does not specify thickness and overall length values. The outer width dimension is identical at 0.709" (18.00mm).

Q: What packaging differences exist?

A: The LCMA50-10-L is supplied in bulk packaging. The main part packaging specification is not documented. Procurement requirements should reflect this distinction.

Q: Are both parts non-insulated?

A: Yes. Both the LCMA50-10H-L and LCMA50-10-L are non-insulated ring terminal connectors, maintaining identical insulation classification.

Q: What is the base product number for these parts?

A: Both parts share the base product number LCMA, indicating they belong to the same Panduit Pan-Lug™ terminal family.