LCMA35-6H-C Ring Terminal Connector M6 Equivalent & Substitute Parts

Part Overview

The LCMA35-6H-C is a ring terminal connector manufactured by Panduit Corp, designed for M6 stud applications with 35mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCMA35-6H-C

Panduit CorpIn Stock: 744LCMA35-6H-C Datasheet

Current PartRFQ

LCMA35-6-C

Panduit CorpIn Stock: 1558LCMA35-6-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMA35-6H-C is determined by the following critical parameters that must remain constant across equivalent parts:

Mandatory Matching Parameters:

• Stud/Tab Size: M6 Stud
• Wire Gauge: 35mm²
• Terminal Type: Flat Sided, Tubular (Battery Lugs)
• Termination Method: Crimp
• Contact Material: Copper
• Contact Finish: Tin
• Series: Pan-Lug™
• Insulation: Non-Insulated

Compliance Requirements:

• RoHS3 Compliance
• REACH Unaffected Status

The LCMA35-6-C qualifies as a direct substitute based on identical alignment across all mandatory parameters. The primary distinction between the main part and its substitute is product status: the LCMA35-6H-C is obsolete, while the LCMA35-6-C maintains active production status.

Parameter Comparison

Engineering Selection Recommendations

The LCMA35-6-C is the designated substitute for the obsolete LCMA35-6H-C based on the following engineering criteria:

Product Status Alignment: The LCMA35-6-C maintains active production status with Panduit Corp, ensuring continued availability and supply chain reliability. The LCMA35-6H-C is classified as obsolete, making the LCMA35-6-C the appropriate selection for new designs and ongoing procurement requirements.

Compliance Certification: Both parts maintain identical regulatory compliance profiles, including ROHS3 compliance and REACH unaffected status. This equivalence ensures that substitution does not introduce compliance risk in regulated applications.

Electrical and Mechanical Specifications: The substitute part maintains all critical electrical and mechanical parameters required for M6 stud applications with 35mm² wire gauge capacity. The copper contact material with tin finish and crimp termination method are preserved across both parts.

Inventory Availability: The LCMA35-6-C demonstrates superior inventory availability with 1461 pieces in stock compared to 636 pieces of the obsolete LCMA35-6H-C, supporting immediate procurement needs.

Frequently Asked Questions (FAQ)

Q: Can the LCMA35-6-C directly replace the LCMA35-6H-C in existing applications?

A: Yes. Both parts share identical stud size (M6), wire gauge (35mm²), terminal type (flat-sided tubular battery lug), contact material (copper), contact finish (tin), and termination method (crimp). The electrical and mechanical interface requirements are equivalent.

Q: What is the primary difference between these two part numbers?

A: The LCMA35-6H-C is obsolete, while the LCMA35-6-C is an active production part. The LCMA35-6-C also specifies mounting type as free hanging in-line without the 45° angle designation present in the main part documentation.

Q: Are there compliance differences between the two parts?

A: No. Both parts maintain identical RoHS3 compliance and REACH unaffected status, ensuring equivalent regulatory standing for applications subject to these standards.

Q: What packaging differences exist between these parts?

A: The LCMA35-6H-C packaging specification is not provided in the available data. The LCMA35-6-C is supplied in bulk packaging format.

Q: Is the LCMA35-6-C suitable for new design implementations?

A: Yes. The LCMA35-6-C is an active production part with established inventory levels, making it appropriate for new designs requiring M6 stud ring terminal connectors with 35mm² wire gauge capacity.

Q: How do the dimensional specifications compare?

A: The LCMA35-6-C provides complete dimensional data: 0.081" (2.05mm) thickness and 1.654" (42.00mm) overall length. The LCMA35-6H-C does not specify these dimensions in available documentation. Both parts share identical outer edge width of 0.610" (15.49mm).