LCMA25-8F-C Equivalent & Substitute Parts

Part Overview

The LCMA25-8F-C is a ring terminal connector manufactured by Panduit Corp, designed for M8 stud applications with a 16mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp and flag termination. The part is currently listed as obsolete, necessitating identification of suitable substitute components to maintain system compatibility and ensure continued availability for replacement and maintenance applications.

Substiute Parts

LCMA25-8F-C

Panduit CorpIn Stock: 972LCMA25-8F-C Datasheet

Current PartRFQ

LCMA25-8-C

Panduit CorpIn Stock: 643LCMA25-8-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCMA25-8F-C is determined by strict adherence to the following critical parameters:

Fixed Parameters (Non-Negotiable for Substitution):

• Manufacturer: Panduit Corp
• Series: Pan-Lug™
• Terminal Type: Flat Sided, Tubular (Battery Lugs)
• Stud/Tab Size: M8 Stud
• Contact Material: Copper
• Contact Finish: Tin
• Insulation Type: Non-Insulated
• Thickness: 0.063" (1.60mm)
• Width - Outer Edges: 0.610" (15.49mm)

Variable Parameters (Allowable Differences):

• Wire Gauge: 16mm² to 25mm²
• Termination: Crimp with or without Flag
• Product Status: Active or Obsolete
• Mounting Type: Free Hanging (In-Line) or Right Angle

The LCMA25-8-C qualifies as a substitute based on matching all fixed parameters while accommodating a higher wire gauge capacity (25mm² versus 16mm²) and simplified termination (Crimp only, without Flag).

Parameter Comparison

Engineering Selection Recommendations

The LCMA25-8-C serves as the primary substitute for the obsolete LCMA25-8F-C. Both components maintain identical mechanical and electrical compatibility across all critical parameters including stud size (M8), contact material (Copper), contact finish (Tin), and dimensional specifications (thickness and width).

The LCMA25-8-C offers the advantage of active product status, ensuring continued availability and supply chain reliability. The increased wire gauge capacity (25mm² versus 16mm²) provides enhanced current-carrying capability while maintaining full mechanical compatibility with M8 stud applications.

Both components satisfy ROHS3 compliance and REACH unaffected status, confirming regulatory alignment for industrial and automotive applications. The substitution is valid for applications where the 16mm² wire gauge of the original part can be replaced with the 25mm² capacity of the substitute without exceeding system design parameters.

Frequently Asked Questions (FAQ)

Q: Can LCMA25-8-C directly replace LCMA25-8F-C in existing assemblies?

A: Yes. Both components share identical stud size (M8), contact material (Copper), contact finish (Tin), thickness (0.063"), and width (0.610"). The mechanical interface is fully compatible. The primary difference is wire gauge capacity, where LCMA25-8-C accommodates larger conductors (25mm² versus 16mm²).

Q: What is the significance of the wire gauge difference between these parts?

A: Wire gauge determines the maximum conductor cross-sectional area the terminal can accommodate. The LCMA25-8-C accepts wire gauges up to 25mm², compared to 16mm² for the LCMA25-8F-C. This allows the substitute to handle larger diameter conductors while maintaining the same stud connection interface.

Q: Does the removal of the Flag termination affect compatibility?

A: The Flag termination on the LCMA25-8F-C is a secondary feature that does not impact the primary electrical or mechanical connection to the M8 stud. The LCMA25-8-C provides equivalent stud connection performance through its Crimp termination alone.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both LCMA25-8F-C and LCMA25-8-C are ROHS3 compliant and REACH unaffected, confirming compliance with current environmental and safety regulations.

Q: Why is the LCMA25-8F-C listed as obsolete?

A: Obsolete status indicates the part is no longer in active production. The LCMA25-8-C, with its active product status and enhanced wire gauge capacity, represents the current production equivalent within the Pan-Lug™ series for M8 stud applications.

Q: Are there packaging differences between these parts?

A: The LCMA25-8F-C packaging information is not specified in available data. The LCMA25-8-C is supplied in Bulk packaging. Confirm packaging requirements with your procurement specifications.