LCMA25-5H-C Equivalent & Substitute Parts

Part Overview

The LCMA25-5H-C is a copper compression metric lug manufactured by Panduit Corp, classified as a terminal connector with rectangular configuration. This part is designated as obsolete, necessitating identification of active equivalent components for ongoing applications requiring 25mm² wire gauge termination with metric stud compatibility.

Substiute Parts

LCMA25-5H-C

Panduit CorpIn Stock: 767LCMA25-5H-C Datasheet

Current PartRFQ

LCMA25-6-C

Panduit CorpIn Stock: 1072LCMA25-6-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCMA25-5H-C is substituted by LCMA25-6-C based on the following substitution criteria:

Common Substitution Parameters:

• Shared base product number (LCMA) indicating product family alignment
• Identical wire gauge specification (25mm²)
• Identical contact material (Copper)
• Identical termination method (Crimp)
• Identical RoHS compliance status (ROHS3 Compliant)
• Same manufacturer (Panduit Corp)
• Identical ECCN and HTSUS classifications

Functional Compatibility: The substitute part LCMA25-6-C maintains the core electrical and mechanical characteristics required for 25mm² copper crimp terminal applications. The primary distinction is the stud size specification: LCMA25-5H-C accommodates M5 stud configuration, while LCMA25-6-C accommodates M6 stud configuration. Selection between these parts is determined by the target stud or bolt size in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

LCMA25-6-C is the designated substitute for LCMA25-5H-C applications. This substitution is supported by:

• Product Status Alignment: LCMA25-6-C maintains active product status, ensuring continued availability and supply chain reliability compared to the obsolete LCMA25-5H-C.

• Regulatory Compliance: Both parts maintain identical ROHS3 compliance and EAR99 ECCN classification, confirming regulatory equivalence for restricted and controlled markets.

• Electrical and Mechanical Compatibility: Identical wire gauge (25mm²), contact material (Copper), and crimp termination specifications ensure functional equivalence in 25mm² copper terminal applications.

• Stud Size Consideration: Selection between M5 and M6 stud configurations is determined by the receiving connection point in the target assembly. Verify stud size requirements before final component selection.

• Inventory Availability: LCMA25-6-C is available in active inventory (1014 Pcs), providing immediate procurement capability.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between LCMA25-5H-C and LCMA25-6-C?

A: The primary difference is the stud size specification. LCMA25-5H-C is designed for M5 stud connections, while LCMA25-6-C is designed for M6 stud connections. Both parts maintain identical wire gauge (25mm²) and copper contact material specifications.

Q: Can LCMA25-6-C be used in applications originally specified for LCMA25-5H-C?

A: LCMA25-6-C can be used only if the target assembly accommodates M6 stud connections. The stud size must match the receiving connection point. If the application requires M5 stud connection, LCMA25-6-C is not compatible.

Q: Why is LCMA25-5H-C listed as obsolete?

A: LCMA25-5H-C is designated as obsolete by the manufacturer. LCMA25-6-C is the active equivalent product within the LCMA base product family for 25mm² copper crimp terminal applications.

Q: Are there any compliance differences between these parts?

A: No. Both LCMA25-5H-C and LCMA25-6-C maintain identical ROHS3 compliance status, ECCN classification (EAR99), and HTSUS code (8536.90.4000).

Q: What packaging is available for LCMA25-6-C?

A: LCMA25-6-C is supplied in bulk packaging configuration.

Q: What is the contact finish specification for LCMA25-6-C?

A: LCMA25-6-C features a tin contact finish, providing corrosion resistance and improved electrical conductivity compared to bare copper surfaces.