LCMA16-10F-C Ring Terminal Connector M10 Equivalent & Substitute Parts

Part Overview

The LCMA16-10F-C is a ring terminal connector manufactured by Panduit Corp, designed for M10 stud applications with 16mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp and flag termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCMA16-10F-C

Panduit CorpIn Stock: 1216LCMA16-10F-C Datasheet

Current PartRFQ

LCMA16-10-C

Panduit CorpIn Stock: 1238LCMA16-10-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMA16-10F-C is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Stud/Tab Size: M10 Stud
• Wire Gauge: 16mm²
• Terminal Type: Flat Sided, Tubular (Battery Lugs)
• Contact Material: Copper
• Contact Finish: Tin
• Insulation: Non-Insulated
• Series: Pan-Lug™
• Manufacturer: Panduit Corp
• RoHS Status: ROHS3 Compliant

The LCMA16-10F-C differs from its substitute primarily in termination configuration and product status. The main part includes flag termination in addition to crimp termination and is classified as obsolete. The substitute part LCMA16-10-C maintains all critical electrical and mechanical parameters while offering active product status and standard crimp termination.

Parameter Comparison

Engineering Selection Recommendations

The LCMA16-10-C serves as the direct substitute for the obsolete LCMA16-10F-C. Both components maintain identical electrical and mechanical specifications across all critical parameters including stud size, wire gauge, contact material, and finish. The substitute part is currently in active production status with confirmed inventory availability.

Selection of LCMA16-10-C is supported by:

• Identical M10 stud and 16mm² wire gauge specifications
• Matching copper contact material with tin finish
• Equivalent dimensional specifications (thickness and width)
• Full ROHS3 compliance and REACH unaffected status
• Active product status ensuring continued supply chain access
• Same base product number (LCMA) confirming design family equivalence

The primary difference in termination method (flag termination removal in the substitute) does not affect core electrical or mechanical compatibility for standard M10 stud ring terminal applications.

Frequently Asked Questions (FAQ)

Q: Can LCMA16-10-C directly replace LCMA16-10F-C in existing applications?

A: Yes. Both parts share identical stud size (M10), wire gauge (16mm²), contact material (copper), contact finish (tin), and dimensional specifications. The substitute part maintains full compatibility with M10 stud mounting configurations.

Q: What is the significance of the flag termination difference?

A: The LCMA16-10F-C includes flag termination in addition to crimp termination, while LCMA16-10-C provides crimp termination only. This difference does not affect electrical performance or mechanical fit for standard ring terminal applications.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both LCMA16-10F-C and LCMA16-10-C are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component applications.

Q: Why is LCMA16-10F-C listed as obsolete?

A: Product obsolescence is determined by manufacturer production status. The LCMA16-10-C remains in active production, providing a current alternative for applications previously using the LCMA16-10F-C.

Q: Are there packaging differences between these parts?

A: Both parts are supplied in bulk packaging. Current inventory levels are 1149 pieces for LCMA16-10F-C and 1128 pieces for LCMA16-10-C.

Q: What is the base product number significance?

A: Both parts share the base product number LCMA, indicating they belong to the same Panduit Pan-Lug™ terminal family and share core design specifications.

Q: Can these parts be used interchangeably in new designs?

A: LCMA16-10-C is the recommended selection for new designs due to active product status. Existing designs using LCMA16-10F-C can transition to LCMA16-10-C without modification to M10 stud mounting interfaces.