LCMA10-8F-C Ring Terminal Connector M8 Equivalent & Substitute Parts

Part Overview

The LCMA10-8F-C is a ring terminal connector manufactured by Panduit Corp, classified within the Pan-Lug™ series. This component is a flat-sided, tubular battery lug designed for M8 stud termination with 10mm² wire gauge capacity. The part features crimp and flag termination and is constructed from copper with tin contact finish.

The LCMA10-8F-C is currently listed with Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing maintenance and repair operations for systems utilizing this terminal connector.

Substiute Parts

LCMA10-8F-C

Panduit CorpIn Stock: 1043LCMA10-8F-C Datasheet

Current PartRFQ

LCMA10-8-C

Panduit CorpIn Stock: 1916LCMA10-8-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMA10-8F-C is determined by strict alignment of the following critical parameters:

Core Compatibility Parameters:

• Stud/Tab Size: M8 Stud (mechanical interface requirement)
• Wire Gauge: 10mm² (electrical capacity requirement)
• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor requirement)
• Contact Material: Copper (electrical conductivity requirement)
• Contact Finish: Tin (corrosion resistance requirement)
• Insulation Type: Non-Insulated (design specification)
• Series: Pan-Lug™ (product family consistency)

The LCMA10-8F-C specifies both Crimp and Flag termination methods. Substitute parts must maintain compatibility with these termination requirements. Dimensional variations in thickness and overall length are permissible provided they do not compromise mechanical fit or electrical performance within the specified M8 stud interface.

Parameter Comparison

Engineering Selection Recommendations

The LCMA10-8-C serves as a direct substitute for the obsolete LCMA10-8F-C based on the following engineering criteria:

Compliance and Regulatory Alignment: Both parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory consistency across applications. The substitute part is currently in Active product status, providing assured supply chain availability and ongoing manufacturer support.

Electrical and Mechanical Compatibility: The substitute part maintains identical specifications for the critical parameters governing terminal function: M8 stud interface, 10mm² wire gauge capacity, copper construction with tin finish, and non-insulated design. These parameters ensure electrical conductivity and mechanical fit within existing M8 stud assemblies.

Dimensional Considerations: The LCMA10-8-C exhibits a reduced thickness (0.041" versus 0.047") and specifies an overall length of 1.213". These dimensional differences remain within acceptable tolerances for flat-sided, tubular battery lug applications. The outer edge width remains constant at 0.512" (13.00mm), maintaining consistent lateral fit.

Termination Method Variance: The main part specifies Crimp and Flag termination, while the substitute specifies Crimp termination only. Applications requiring flag termination capability must evaluate this difference against specific assembly requirements.

Mounting Configuration: The main part specifies Free Hanging (In-Line) and Right Angle mounting options. The substitute specifies Free Hanging (In-Line) only. Applications requiring right-angle orientation must assess this limitation.

Frequently Asked Questions (FAQ)

Q: Can LCMA10-8-C replace LCMA10-8F-C in all applications?

A: The LCMA10-8-C is electrically and mechanically compatible for M8 stud termination with 10mm² wire gauge. However, applications specifically requiring flag termination or right-angle mounting orientation must evaluate whether the substitute part's specifications align with design requirements.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Product Status—LCMA10-8F-C is Obsolete while LCMA10-8-C is Active; (2) Thickness—LCMA10-8F-C is 0.047" versus LCMA10-8-C at 0.041"; (3) Termination—LCMA10-8F-C includes Flag termination while LCMA10-8-C specifies Crimp only; (4) Mounting—LCMA10-8F-C offers Right Angle option while LCMA10-8-C is Free Hanging (In-Line) only.

Q: Are both parts from the same manufacturer?

A: Yes, both LCMA10-8F-C and LCMA10-8-C are manufactured by Panduit Corp and belong to the Pan-Lug™ series.

Q: Do these parts have the same wire gauge capacity?

A: Yes, both parts accommodate 10mm² wire gauge and interface with M8 studs.

Q: What is the significance of the Obsolete status?

A: Obsolete status indicates that LCMA10-8F-C is no longer in active production. The LCMA10-8-C, with Active status, represents the current production equivalent and ensures continued availability for new designs and replacement applications.

Q: Are there packaging differences between these parts?

A: The LCMA10-8F-C packaging is listed as unspecified, while LCMA10-8-C is supplied in Bulk packaging. Inventory availability differs: LCMA10-8F-C has 937 pieces in stock versus 1870 pieces for LCMA10-8-C.

Q: Do both parts meet the same regulatory standards?

A: Yes, both parts are ROHS3 Compliant and REACH Unaffected, ensuring equivalent regulatory compliance.

Q: What should I verify before implementing the substitute part?

A: Confirm that your application does not require the flag termination option or right-angle mounting configuration that are specific to the LCMA10-8F-C. Verify that the reduced thickness (0.041" versus 0.047") is acceptable within your assembly constraints.