LCMA10-10F-C Ring Terminal Connector M10 Equivalent & Substitute Parts

Part Overview

The LCMA10-10F-C is a ring terminal connector manufactured by Panduit Corp, designed for M10 stud applications with 10mm² wire gauge capacity. This component is classified as a flat-sided, tubular battery lug terminal with crimp and flag termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal type and electrical specifications.

Substiute Parts

LCMA10-10F-C

Panduit CorpIn Stock: 925LCMA10-10F-C Datasheet

Current PartRFQ

LCMA10-10-C

Panduit CorpIn Stock: 787LCMA10-10-C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCMA10-10F-C is determined by the following critical parameters that must remain constant across equivalent parts:

Mandatory Matching Parameters:

• Stud/Tab Size: M10 Stud (mechanical interface requirement)
• Wire Gauge: 10mm² (electrical current capacity)
• Terminal Type: Flat Sided, Tubular (Battery Lugs) (form factor and application class)
• Contact Material: Copper (electrical conductivity)
• Contact Finish: Tin (corrosion resistance and solderability)
• Insulation Type: Non-Insulated (application environment)
• Series: Pan-Lug™ (product family consistency)
• RoHS Status: ROHS3 Compliant (regulatory requirement)

Variable Parameters Permitting Substitution:

• Product Status (Obsolete to Active transition acceptable)
• Packaging configuration (Bulk vs. other formats)
• Termination method variations (Crimp vs. Crimp with Flag)
• Physical dimensions (Thickness, Width, Length) within tolerance for mechanical fit
• Mounting Type (Free Hanging In-Line vs. Right Angle orientation)

The LCMA10-10C represents an active product variant within the same Pan-Lug™ series, maintaining all mandatory electrical and mechanical parameters while differing in termination configuration and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

The LCMA10-10-C is the designated active equivalent for the obsolete LCMA10-10F-C. Both components share identical electrical specifications, mechanical interface requirements (M10 stud), wire gauge capacity (10mm²), and regulatory compliance certifications (ROHS3 Compliant, REACH Unaffected).

The primary distinction between these parts is the termination configuration. The LCMA10-10F-C includes a flag termination feature in addition to crimp termination, while the LCMA10-10-C provides crimp termination only. This difference does not affect electrical performance or mechanical compatibility with M10 stud assemblies.

Physical dimension variations (thickness and overall length) reflect design refinements within the Pan-Lug™ series. These dimensional changes do not compromise functional equivalence for standard M10 stud mounting applications.

The LCMA10-10-C is available in active production status with confirmed inventory (685 Pcs New Original In Stock), ensuring supply chain reliability for new designs and replacement applications.

Frequently Asked Questions (FAQ)

Q: Can LCMA10-10-C directly replace LCMA10-10F-C in existing assemblies?

A: Yes. Both components meet identical electrical and mechanical specifications for M10 stud applications with 10mm² wire gauge. The termination method difference (flag vs. non-flag) does not affect compatibility with standard M10 stud mounting interfaces.

Q: What is the significance of the "Flag" designation in LCMA10-10F-C?

A: The flag termination feature provides an additional mechanical retention element during the crimp process. The LCMA10-10-C achieves equivalent electrical and mechanical performance through crimp termination alone, representing a design optimization within the product series.

Q: Are there dimensional constraints that affect substitution?

A: The LCMA10-10-C exhibits increased thickness (0.065" vs. 0.047") and specified overall length (1.213"). These dimensional variations are within the design envelope of the Pan-Lug™ series and do not prevent mechanical fit in standard M10 stud applications. Applications with space constraints should verify dimensional compatibility with mounting hardware.

Q: Does the packaging difference (Bulk vs. unspecified) affect component performance?

A: No. Packaging format does not influence electrical or mechanical performance. The LCMA10-10-C is supplied in bulk packaging, which is standard for terminal components and does not affect functional equivalence.

Q: Are both parts compliant with current regulatory requirements?

A: Yes. Both LCMA10-10F-C and LCMA10-10-C are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards for electronic component manufacturing and distribution.

Q: Why is LCMA10-10F-C listed as obsolete?

A: Product obsolescence reflects manufacturing lifecycle decisions by Panduit Corp. The LCMA10-10-C represents the active continuation of this terminal type within the Pan-Lug™ series, offering equivalent performance with current production support.

Q: What is the base product number significance?

A: Both components share the base product number LCMA, indicating they belong to the same terminal family within Panduit's Pan-Lug™ series. Variations in the suffix (10F-C vs. 10-C) denote specific configuration differences while maintaining core functional equivalence.