LCGGV6P00SCUE Equivalent & Substitute Parts

Part Overview

The LCGGV6P00SCUE is a snap action SPDT switch manufactured by C&K, designed for through-hole mounting applications requiring 5A at 125V AC operation. This component features a round pin plunger actuator with epoxy sealed terminals and is rated for 100,000 electrical cycles. The product carries a "Not For New Designs" status, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

LCGGV6P00SCUE

C&KIn Stock: 1018LCGGV6P00SCUE Datasheet

Current PartRFQ

1SX48-T

Honeywell Sensing and Productivity SolutionsIn Stock: 11731SX48-T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LCGGV6P00SCUE is determined by the following critical parameters:

• Circuit configuration must be SPDT
• Switch function must be On-Momentary
• Actuator type must be round pin plunger
• Current and voltage ratings must meet or exceed application requirements
• Operating temperature range must encompass the intended operating environment
• Electrical life must support the application cycle count

The 1SX48-T from Honeywell Sensing and Productivity Solutions qualifies as a functional equivalent based on matching circuit topology, switch function, and actuator type. However, substitution requires evaluation of mounting type and termination style compatibility with the target application, as these differ between the original and substitute part.

Parameter Comparison

Engineering Selection Recommendations

The 1SX48-T provides electrical performance that exceeds the LCGGV6P00SCUE specification across current (7A vs. 5A), voltage (250V vs. 125V AC), and operating temperature range (-55°C to 125°C vs. -25°C to 85°C). Both components maintain RoHS compliance and identical release force characteristics.

Selection of the 1SX48-T as a substitute requires confirmation that the application can accommodate the following differences:

• Mounting transition from through-hole (PC pin) to chassis mount (solder turret) termination
• Mechanical envelope variation of 0.010" in operating position
• Packaging format change from bulk to tray

The 1SX48-T carries Active product status, ensuring continued availability and support for new applications and ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1SX48-T directly replace the LCGGV6P00SCUE in existing assemblies?

A: Direct replacement depends on PCB layout and mounting infrastructure. The LCGGV6P00SCUE uses through-hole PC pin termination, while the 1SX48-T requires chassis mount solder turret connection. PCB redesign or adapter implementation may be necessary.

Q: What are the electrical compatibility considerations?

A: The 1SX48-T exceeds the LCGGV6P00SCUE in all electrical ratings. At 5A and 125V operation, the 1SX48-T operates well within its design envelope. No derating is required for equivalent or lower electrical loads.

Q: How do the mechanical characteristics compare?

A: Operating force (141gf vs. 142gf) and release force (28gf) are functionally equivalent. Operating position differs by 0.010", which may affect mechanical linkage design depending on application sensitivity.

Q: Are there compliance or certification differences?

A: Both components are RoHS compliant. The LCGGV6P00SCUE carries RoHS3 certification, while the 1SX48-T carries RoHS certification. Both meet ECCN EAR99 classification and HTSUS 8536.50.7000 tariff code requirements.

Q: What is the impact of the "Not For New Designs" status on the LCGGV6P00SCUE?

A: This status indicates the manufacturer no longer recommends this component for new product development. The 1SX48-T, with Active product status, is the appropriate selection for new designs requiring equivalent functionality.