LCDX8-14BF-L Equivalent & Substitute Parts

Part Overview

The LCDX8-14BF-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 8 AWG wire termination on a 1/4" stud. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and system maintenance. The terminal features a two-stud hole configuration with electro-tin contact finish and non-insulated construction. Due to its obsolete status, sourcing equivalent substitute parts is required for new designs and replacement applications.

Substiute Parts

LCDX8-14BF-L

Panduit CorpIn Stock: 849LCDX8-14BF-L Datasheet

Current PartRFQ

LCDX8-14A-L

Panduit CorpIn Stock: 2181LCDX8-14A-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX8-14BF-L is based on electrical and mechanical compatibility within the Pan-Lug™ series. The primary substitute, LCDX8-14A-L, maintains equivalence through the following critical parameters:

Electrical Compatibility:

• Wire gauge: 8 AWG (identical)
• Stud size: 1/4" (identical)
• Barrel dimensions: ID 0.180" (4.57mm), OD 0.270" (6.86mm) (identical)
• Ring ID: 0.270" (6.86mm) (identical)
• Contact material and finish: Copper with electro-tin (identical)

Mechanical Compatibility:

• Tab thickness: 0.070" (1.78mm) (identical)
• Termination method: Crimp, barrel (identical)
• Terminal style: Two stud holes (identical)
• Mounting type: Free hanging, in-line configuration (compatible)

Regulatory Compliance:

• RoHS3 compliant (identical)
• REACH unaffected status (identical)

The primary distinction between the main part and substitute is the terminal type: the LCDX8-14BF-L features a rectangular tongue configuration, while the LCDX8-14A-L is a lug/grounding terminal. Both configurations accommodate the same wire gauge and stud size, with identical barrel and ring dimensions, enabling functional substitution in applications where the terminal geometry change is acceptable.

Parameter Comparison

Engineering Selection Recommendations

The LCDX8-14A-L is the designated substitute for the obsolete LCDX8-14BF-L based on the following engineering criteria:

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring compatibility with current environmental and safety standards.

Electrical and Mechanical Equivalence: The substitute part maintains identical wire gauge (8 AWG), stud size (1/4"), barrel dimensions, and contact specifications. These parameters are the primary determinants of electrical performance and mechanical fit in the circuit assembly.

Product Status: The LCDX8-14A-L holds active product status with confirmed inventory availability (2080 pcs), ensuring reliable procurement for ongoing applications. The main part LCDX8-14BF-L is obsolete, making the substitute the appropriate selection for new designs and replacement requirements.

Terminal Configuration Difference: The primary design difference is the terminal type—rectangular tongue versus lug/grounding. This distinction affects the physical geometry and mounting orientation but does not alter the electrical interface at the wire termination or stud connection points. Component selection should account for the specific mounting geometry requirements of the application.

Frequently Asked Questions (FAQ)

Q: Can the LCDX8-14A-L directly replace the LCDX8-14BF-L in all applications?

A: The LCDX8-14A-L is electrically and mechanically equivalent for wire gauge, stud size, barrel dimensions, and contact specifications. However, the terminal type differs—rectangular tongue versus lug/grounding. Substitution is valid when the application's mounting geometry and terminal orientation accommodate the lug configuration. Physical layout verification is required.

Q: What are the critical parameters that determine substitution compatibility?

A: Wire gauge (8 AWG), stud size (1/4"), barrel ID (0.180"/4.57mm), barrel OD (0.270"/6.86mm), ring ID (0.270"/6.86mm), tab thickness (0.070"/1.78mm), termination method (crimp, barrel), contact material (copper), and contact finish (electro-tin) are the parameters that establish functional equivalence.

Q: Why is the LCDX8-14BF-L obsolete, and what does this mean for procurement?

A: Obsolete status indicates the part is no longer manufactured or supported by Panduit Corp. The LCDX8-14A-L is the active equivalent part with current manufacturing and inventory support. New designs and replacement applications should specify the LCDX8-14A-L.

Q: Are there packaging differences between the main part and substitute?

A: The main part LCDX8-14BF-L packaging information is not specified in available data. The substitute LCDX8-14A-L is supplied in bulk packaging. Packaging requirements should be confirmed with the supplier based on application needs.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the LCDX8-14BF-L and LCDX8-14A-L are ROHS3 compliant and REACH unaffected, meeting current environmental and safety regulations.

Q: What is the difference between a rectangular tongue terminal and a lug/grounding terminal?

A: The rectangular tongue terminal (LCDX8-14BF-L) features a flat, rectangular contact surface, while the lug/grounding terminal (LCDX8-14A-L) features a ring or loop configuration. Both accommodate the same wire gauge and stud size, but the physical geometry and mounting orientation differ. Application-specific mounting requirements determine which configuration is appropriate.

Q: Is inventory availability a consideration for part selection?

A: Yes. The LCDX8-14A-L has confirmed inventory of 2080 pcs in stock, ensuring reliable procurement. The main part LCDX8-14BF-L, being obsolete, has limited availability (745 pcs noted as existing stock). For ongoing applications, the active substitute is the appropriate selection.