LCDX750-12GF-3 Equivalent & Substitute Parts

Part Overview

The LCDX750-12GF-3 is a terminal connector rectangular manufactured by Panduit Corp, classified as a wire management component. This part is designated as obsolete and is no longer in active production. Due to its obsolete status, locating original inventory becomes increasingly difficult. The substitute part LCDX750-12-3 provides functional equivalence for applications requiring terminal connector rectangular assemblies with matching electrical and mechanical specifications.

Substiute Parts

LCDX750-12GF-3

Panduit CorpIn Stock: 802LCDX750-12GF-3 Datasheet

Current PartRFQ

LCDX750-12-3

Panduit CorpIn Stock: 1111LCDX750-12-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The LCDX750-12-3 qualifies as a direct substitute for the LCDX750-12GF-3 based on the following critical parameters:

• Wire Gauge Compatibility: Both parts are rated for 750MCM (kcmil) conductor sizes
• Stud/Tab Size: Both utilize 1/2 stud configuration
• Manufacturer Consistency: Both are manufactured by Panduit Corp
• Terminal Type: Both are rectangular tongue terminal connectors
• Termination Method: Both employ crimp barrel termination
• Mounting Configuration: Both feature free hanging (in-line) mounting type

The primary distinction is that LCDX750-12-3 maintains active product status with established supply chain availability, whereas LCDX750-12GF-3 is obsolete.

Parameter Comparison

Engineering Selection Recommendations

LCDX750-12-3 is the appropriate selection for new designs and replacement applications requiring 750MCM terminal connectors with 1/2 stud configuration. This part maintains active product status, ensuring reliable supply chain access and compliance with current regulatory standards including ROHS3 and REACH requirements.

The LCDX750-12GF-3 should be reserved for legacy system maintenance only where original component specifications are mandated by design documentation. Existing inventory of LCDX750-12GF-3 (740 units) provides limited availability for such applications.

Both parts share identical electrical and mechanical specifications for wire gauge, stud size, termination method, and mounting configuration, establishing functional interchangeability within the specified parameter set.

Frequently Asked Questions (FAQ)

Q: Can LCDX750-12-3 directly replace LCDX750-12GF-3 in existing installations?

A: Yes. Both parts share identical wire gauge (750MCM), stud size (1/2), terminal type (rectangular), termination method (crimp barrel), and mounting configuration (free hanging in-line). The parts are functionally equivalent for applications within these specifications.

Q: What is the primary reason for substitution?

A: LCDX750-12GF-3 is obsolete and no longer manufactured. LCDX750-12-3 is an active product with established inventory and supply chain availability.

Q: Are there packaging differences between these parts?

A: LCDX750-12GF-3 packaging is not specified in available documentation. LCDX750-12-3 is supplied in bulk packaging.

Q: Do both parts meet current compliance standards?

A: LCDX750-12-3 is ROHS3 compliant and REACH unaffected. LCDX750-12GF-3 compliance status is not specified due to its obsolete designation.

Q: What are the physical dimensions of the substitute part?

A: LCDX750-12-3 specifications include overall length of 5.550" (140.97mm), outer width of 2.170" (55.12mm), tab thickness of 0.320" (8.13mm), barrel ID of 1.170" (29.72mm), barrel OD of 1.500" (38.10mm), and ring ID of 0.530" (13.46mm).

Q: What is the contact material and finish?

A: LCDX750-12-3 features copper contact material with electro-tin finish and yellow color identification.