LCDX6-10GF-L Equivalent & Substitute Parts

Part Overview

The LCDX6-10GF-L is a rectangular tongue terminal connector manufactured by Panduit Corp, designed for 6 AWG wire gauge applications with a #10 stud connection. This component is classified as a Pan-Lug™ series terminal and features a non-insulated, electro-tin plated copper construction. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

LCDX6-10GF-L

Panduit CorpIn Stock: 968LCDX6-10GF-L Datasheet

Current PartRFQ

LCDX6-10A-L

Panduit CorpIn Stock: 1059LCDX6-10A-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LCDX6-10GF-L is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Wire gauge (6 AWG), stud size (#10), contact material (copper), contact finish (electro-tin), and termination method (crimp, barrel) must remain identical.

Mechanical Parameters: Terminal type (rectangular tongue), terminal style (two stud holes), tab thickness (0.080"), barrel inner diameter (0.220"), barrel outer diameter (0.310"), and ring inner diameter (0.200") must match exactly.

Material & Compliance Parameters: Insulation type (non-insulated), RoHS status (ROHS3 compliant), and manufacturer series (Pan-Lug™) must be consistent.

The LCDX6-10A-L qualifies as a direct substitute based on complete alignment with all specified parameters. The primary distinction between the main part and its substitute is product status and mounting configuration detail.

Parameter Comparison

Engineering Selection Recommendations

The LCDX6-10A-L is the direct equivalent substitute for the obsolete LCDX6-10GF-L. Both components maintain identical electrical and mechanical specifications, ensuring functional interchangeability in applications requiring 6 AWG rectangular tongue terminals with #10 stud connections.

The LCDX6-10A-L carries active product status, providing assured supply availability and ongoing manufacturer support. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current applications.

Selection of the LCDX6-10A-L eliminates obsolescence risk while preserving all critical performance parameters specified for the original LCDX6-10GF-L design.

Frequently Asked Questions (FAQ)

Q: Can the LCDX6-10A-L be used as a direct replacement for the LCDX6-10GF-L?

A: Yes. The LCDX6-10A-L is a direct functional equivalent. All electrical parameters (wire gauge, stud size, contact material, contact finish, termination method) and mechanical parameters (terminal type, tab thickness, barrel dimensions, ring dimensions) are identical between the two parts.

Q: What is the primary difference between these two part numbers?

A: The LCDX6-10GF-L is obsolete, while the LCDX6-10A-L maintains active product status. The LCDX6-10A-L is supplied in bulk packaging, whereas the main part does not specify packaging configuration.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under the same ECCN (EAR99) and HTSUS code (8536.90.4000).

Q: What wire gauge and stud size does this terminal accommodate?

A: This terminal is designed for 6 AWG wire gauge with a #10 stud connection point.

Q: Is insulation included with this terminal?

A: No. Both the LCDX6-10GF-L and LCDX6-10A-L are non-insulated terminals.

Q: What termination method is used for these terminals?

A: Both terminals use crimp and barrel termination methods for wire attachment.